[ILSB_logo] Christian Doppler Laboratory
for
Functionally Oriented Materials Design
[IfM_logo]

German


PUBLICATIONS FROM THE
CHRISTIAN DOPPLER LABORATORY FOR
FUNCTIONALLY ORIENTED MATERIALS DESIGN





Publications in Scientific Journals


Plankensteiner A.F., Böhm H.J., Rammerstorfer F.G., Pettermann H.E.:
Multiscale Modeling of Highly Heterogeneous Particulate MMCs;
J.Physique IV 8, Pr8-301 - Pr8-308, 1998.

Yan W.Y., Shan G.X., Kolednik O., Fischer, F.D.:
A Numerical Simulation of the Crack Growth in a Smooth CT Specimen;
Key Engng.Mater. 145-149, 179-184, 1998.

Pettermann H.E., Plankensteiner A.F., Böhm H.J., Rammerstorfer F.G.:
A Thermo-Elasto-Plastic Constitutive Law for Inhomogeneous Materials Based on an Incremental Mori-Tanaka Approach;
Comput.Struct. 71, 197-214, 1999.

Chimani C.M., Rammerstorfer F.G., Böhm H.J.:
On Curvature Effects on the Materials Description of Unidirectionally Reinforced Composite Materials;
Comput.Meth.Appl.Mech.Engng. 185, 191-201, 2000.

Danzer R., Fischer F.D., Yan W.Y.:
Application of Probabilistic Fracture Mechanics to a Dynamic Loading Situation on the Example of a Dynamic Tension Test for Ceramics;
J.Europ.Ceram.Soc. 20, 901-911, 2000.

Daxner T., Rammerstorfer F.G., Böhm H.J.:
Adaptation of Density Distributions for Optimising Aluminium Foam Structures;
Mater.Sci.Technol. 16, 935-939, 2000.

Daxner T., Böhm H.J., Rammerstorfer F.G., Denzer R., Maier M.:
Simulation des elasto-plastischen Materialverhaltens von Metallschaum mit Hilfe von 2D und 3D Einheitszellen-Modellen;
Mater.wiss.u.Werkstofftechn. 31, 447-450, 2000.

Yan W.Y., Fischer F.D.:
Applicability of the Hertz Contact Theory to Rail-Wheel Contact Problems;
Arch.Appl.Mech. 70, 225-268, 2000.

Böhm H.J., Han W.:
Comparisons Between Three-Dimensional and Two-Dimensional Multi-Particle Unit Cell Methods for Particle Reinforced Composites;
Modell.Simul.Mater.Sci.Engng. 9, 47-65, 2001.

Gamsjäger E., Chimani C.M., Fischer F.D., Svoboda J.:
Diffusional Phase Transformations in Steel – Theory and Application to Continuous Casting;
J.Physique IV 11, 149-156, 2001.

Gamsjäger E., Fischer F.D., Chimani C.M., Svoboda J.:
Austenite-to-Ferrite Phase Transformation during Continuous Casting of Steels;
Int.J.Forming Processes 4, 551-572, 2001.

Han W., Böhm H.J.:
The Effects of Three-Dimensional Multi-Particle Arrangements on the Mechanical Behavior and Damage Initiation of Particle-Reinforced MMCs;
Compos.Sci.Technol. 61, 1581-1590, 2001.

Svoboda J., Fischer F.D., Fratzl P., Gamsjäger E., Simha N.K.:
Kinetics of Interfaces During Diffusional Transformations;
Acta mater. 49, 1249-1259, 2001.

Böhm H.J., Eckschlager A., Han W.:
Multi-Inclusion Unit Cell Models for Metal Matrix Composites with Randomly Oriented Discontinuous Reinforcements;
Comput.Mater.Sci. 25, 42-53, 2002.

Daves W., Fischer F.D.:
Modelling of the Plastification Near the Rough Surface of a Rail by the Wheel-Rail Contact;
Wear 253, 241-246, 2002.

Eckschlager A., Böhm H.J., Han W.:
A Unit Cell Model for Brittle Fracture of Particles Embedded in a Ductile Matrix;
Comput.Mater.Sci. 25, 85-91, 2002.

Gamsjäger E., Antretter T., Schmaranzer C., Preis W., Chimani C.M., Simha N.K., Svoboda J., Fischer F.D.:
Diffusional Phase Transformation and Deformation in Steels;
Comput.Mater.Sci. 25, 92-99, 2002.

Pettermann H.E., Böhm H.J., Alcalá J.:
Normalized Diagrams for Micro-Mechanical Estimates of the Elastic Response of Composite Materials;
Metall.Mater.Trans.A 33A, 3187-3199, 2002.

Svoboda J., Fischer F.D., Gamsjäger E.:
Influence of Solute Segregation and Drag on Properties of Migrating Interfaces;
Acta mater. 50, 967-977, 2002.

Duschlbauer D., Pettermann H.E., Böhm H.J.:
Mori-Tanaka Based Evaluation of Inclusion Stresses in Composites with Nonaligned Reinforcements;
Scr.mater. 48, 223-228, 2003.

Gamsjäger E., Fischer F.D., Svoboda J.:
Interaction of Phase Transformation and Diffusion in Steels;
J.Engng.Mater.Technol. 125, 22-26, 2003.

Gamsjäger E., Fischer F.D., Svoboda J.:
Influence of Non-Metallic Inclusions on the Austenite-to-Ferrite Phase Transformation;
Mater.Sci.Engng. A365, 291--297, 2003.

Böhm H.J.:
Continuum Models for the Thermomechanical Behavior of Discontinuously Reinforced Materials;
Adv.Engng.Mater. 6, 626-633, 2004.

Böhm H.J., Han W., Eckschlager A.:
Multi-Inclusion Unit Cell Studies of Reinforcement Stresses and Particle Failure in Discontinuously Reinforced Ductile Matrix Composites;
Comput.Model.Engng.Sci. 5, 5-20, 2004.

Drabek T., Böhm H.J.:
Damage Models for Studying Ductile Matrix Failure in Composites;
Comput.Mater.Sci. 32, 329-336, 2005.

Fischer F.D., Böhm H.J.:
On the Role of the Transformation Eigenstrain on the Growth or Shrinkage of Spheroidal Isotropic Precipitates;
Acta mater. 53, 367-374, 2005.

Jiraskova Y., Svoboda J., Schneeweiss O., Daves W., Fischer F.D.:
Microscopic Investigation of Surface Layers on Rails;
Appl.Surf.Sci. 239, 132-141, 2005.




Publications in Conference Proceedings


Yan W.Y., Kolednik O., Fischer F.D:
The Variation of the Near-Tip Parameters of a Growing Crack in a Plain-Sided CT Specimen;
in Fracture from Defects (ECF 12-ESIS) Vol.II (Eds. M.W.Brown, E.R.de los Rios, K.J.Miller), pp. 1041-1046; EMAS Publishing, Cradley Heath, UK, 1998.

Böhm H.J., Eckschlager A., Han W.:
Modeling of Phase Arrangement Effects in High Speed Tool Steels; in Tool Steels in the Next Century (Eds. F.Jeglitsch, R.Ebner, H.Leitner), pp. 147-156; Montanuniversität Leoben, 1999.

Böhm H.J., Chimani C.M., Pettermann H.E., Plankensteiner A.F., Rammerstorfer F.G.:
Multiscale Treatment of Inhomogeneous Materials by Finite Elements;
in Discretization Methods in Structural Mechanics (Eds. H.A.Mang, F.G.Rammerstorfer), pp. 257-264; Kluwer, Dordrecht, 1999.

Böhm H.J., Eckschlager A., Han W., Rammerstorfer F.G.:
3/D Arrangement Effects in Particle Reinforced Metal Matrix Composites;
in Plastic and Viscoplastic Response of Materials and Metal Forming (Eds. A.S.Khan, H.Zhang, Y.Yuan), pp. 466-468; NEAT Press, Fulton, MD, 2000.

Daves W., Fischer F.D., Fischer J.:
Modelling of Rolling Friction Taking into Account the Microstructure of the Contacting Materials;
in Proc. EUROMAT 2000, Advances in Mechanical Behaviour, Plasticity and Damage (Eds. D.Miannay, P.Costa, D.François, A.Pineau), pp. 573-578; Elsevier, Amsterdam, 2000.

Daves W., Fischer F.D., Fischer J.:
Modelling of the Wheel-Rail Contact Taking into Account the Microstructure and Material Behaviour of the Contacting Materials;
in Proc. 5th International Conference on Contact Mechanics and Wear of Rail/Wheel Systems, pp. 136-142; Institute of Industrial Science, University of Tokyo, 2000.

Daves W., Fischer J., Fischer F.D.:
Analyse von schädigungsrelevanten Verformungsprozessen im Mikrobereich bei mehrfacher Überrollung;
in Tagungsbericht Internationales Symposium Schienenfehler (Ed. K.O.Edel); FH Brandenburg, 2000.

Fischer F.D., Chimani C.M., Gamsjäger E., Simha N.K., Svoboda J.:
Interaction of Diffusional Transformation and Deformation in Steels;
in Plastic and Viscoplastic Response of Materials and Metal Forming (Eds. A.S.Khan, H.Zhang, Y.Yuan), pp. 181-183; NEAT Press, Fulton, MD, 2000.

Gamsjäger E., Chimani C.M., Fischer F.D., Svoboda J.:
Continuum Mechanical Aspects of Diffusional Phase Transformations in Steels — A Case Study for Continuous Casting;
in Proc. EUROMAT 2000, Advances in Mechanical Behaviour, Plasticity and Damage (Eds. D.Miannay, P.Costa, D.François, A.Pineau), pp. 853-858; Elsevier, Amsterdam, 2000.

Gamsjäger E., Chimani C.M., Mörwald K., Böhm H.J., Fischer F.D.:
Effects of Solid Phase Transformation on Mechanical Properties of Steel during Casting;
in Tagungsband "Continuous Casting Conference 2000", Paper 60; VAI, Linz, 2000.

Rammerstorfer F.G., Böhm H.J.:
Finite Element Methods in Micromechanics of Composites and Foam Materials;
in Computational Mechanics for the Twenty-First Century (Ed. B.H.V. Topping), pp. 145-164; Saxe-Coburg Publications, Edinburgh, 2000.

Böhm H.J., Han W., Eckschlager A.:
Multi-Inclusion Unit Cell Studies of the Thermomechanical Behavior of Discontinuously Reinforced Ductile Matrix Composites;
in Advances in Computational Engineering and Sciences (Eds. S.N.Atluri, T.Nishioka, M.Kikuchi), Paper No.95; Tech Science Press, Encino, CA, 2001.

Eckschlager A., Han W., Böhm H.J.:
Modeling of Brittle Particle Fracture in Particle Reinforced Ductile Matrix Composites by 3D-Unit Cells;
in Proceedings of the 13th International Conference on Composite Materials (Ed. Y.Zhang), Paper 1342; Scientific and Technical Documents Publishing House, Beijing, 2001.

Gamsjäger E., Fischer F.D., Chimani C.M., Svoboda J.:
Large Strain Concentrations During Continuous Casting &emdash; A Micromechanical Study During Diffusional Phase Transformation; in Proc. ESAFORM 2001 (Ed. A.Habraken), Université de Liège, 2001.

Han W., Eckschlager A., Böhm H.J.:
Numerical Study on the Influence of Thermal Residual Stresses in Metal Matrix Composites Using 3/D Multi-Inclusion Unit Cells;
in Thermal Stresses 2001 (Eds. Y.Tanigawa, R.B.Hetnarski, N.Noda), pp. 319-322; Osaka Prefecture University, Osaka, Japan, 2001.

Han W., Eckschlager A., Böhm H.J.:
Numerical Modeling of Discontinuously Reinforced Metal Matrix Composites by Three-Dimensional Multi-Inclusion Unit Cells;
in Proceedings of the 13th International Conference on Composite Materials (Ed. Y.Zhang), Paper 1222; Scientific and Technical Documents Publishing House, Beijing, 2001.

Böhm H.J., Drabek T., Eckschlager A.:
Continuum Mechanical Unit Cell Models for Studying the Thermomechanical Behavior of High Speed Tool Steels;
in The Use of Tool Steels: Experience and Research (Eds. J. Bergström, G. Fredriksson, M. Johansson, O. Kotik, F. Thuvander), pp. 415-424; Karlstad University, Karlstad, Sweden, 2002.

Eckschlager A., Böhm H.J.:
3D Finite Element Unit Cell Study of Particle Failure in Brittle Particle Reinforced Ductile Matrix Composites;
in Proc. Fifth World Congress on Compuational Mechanics (WCCM V) (Eds. H.A.Mang, F.G. Rammerstorfer, J. Eberhardsteiner), Paper # 80869; Vienna, 2002.

Böhm H.J.:
Kontinuumsmodelle zur Beschreibung des thermomechanischen Verhaltens diskontinuierlich verstärkter Materialien;
in Verbundwerkstoffe (Ed. H.P. Degischer), pp. 45-54; Wiley VCH, Weinheim, 2003.

Daves W., Fischer F.D., Stadlbauer W., Werner E.:
Modelling and Characterization of Large Shear Strains at a Rail Surface;
in Proc. IUTAM Symposium on Computational Mechanics of Solids at Large Strains (Ed. C.Miehe), pp. 467-475; Kluwer Academic Publishers, Dordrecht, 2003.

Daves W., Yao W.P., Razny W., Fischer F.D., Pointner P., Stock R., Oswald R., Blumauer H.:
Dynamical Finite Element Analysis - A Wheel in a Curve and a Wheel Passing a Crossing;
in Proc. 6th Int. Conf. on Contact and Wear of Rail/Wheel Systems (Eds. A.Ekberg, E.Kabo, J.Ringsberg), Vol.II, pp. 455-460; Göteborg, 2003.

Böhm H.J.:
A Short Introduction to Continuum Micromechanics; in Mechanics of Microstructured Materials (Ed.: H.J.Böhm), pp. 1-40; CISM Courses and Lectures Vol.464, Springer-Verlag, Vienna, 2004.

Böhm H.J.:
Modeling the Mechanical Behavior of Short Fiber Reinforced Composites; in Mechanics of Microstructured Materials (Ed.: H.J.Böhm), pp. 41-56; CISM Courses and Lectures Vol.464, Springer-Verlag, Vienna, 2004.

Böhm H.J., Drabek T.:
Implementierung nichtlokaler duktiler Schädigungsmodelle in ABAQUS/Standard:
in ABAQUS Austria Anwenderkonferenz 2004, paper 1;
ABAQUS Inc., Providence, RI, 2004.

Böhm H.J., Han W., Eckschlager A.:
Multi-Inclusion Unit Cell Studies of Reinforcement Stresses and Particle Failure in Discontinuously Reinforced Ductile Matrix Composites;
Comput.Model.Engng.Sci. 5, 5-20, 2004.

Böhm H.J., Duschlbauer D., Drabek T., Chimani C.:
Finite Element Based Micromechanical Model of Ductile Intergranular Cracks in Columnar Two-Phase System;
in Computational Mechanics. Proceedings of the Sixth World Congress on Computational Mechanics (Eds.: Z.H.Yao, M.W.Yuan, W.X.Zhong), paper 258;
Tsinghua University Press and Springer-Verlag, Beijing, 2004.

Böhm H.J., Duschlbauer D., Drabek T., Kolednik O., Shan G.X., Chimani C.:
Numerical Studies of Crack Sensitivity under Continuous Casting Conditions;
in: Proceedings of the VAI Continuous Casting and Hot-Rolling Conference CCR'04, Paper 6.2;
VAI, Linz, Austria, 2004.

Drabek T., Böhm H.J.:
Simulation of Ductile Damage in Metal Matrix Composites;
in: Proceedings of NUMIFORM 2004 (Eds. S. Ghosh, J.M. Castro, J.K. Lee), pp. 1857-1862;
American Institute of Physics, Melville, NY, 2004.

Drabek T., Böhm H.J.:
Unit Cell Studies of Ductile Damage in Fiber Reinforced Metal Matrix Composites;
in: Proceedings of the 4th European Congress on Computational Methods in Applied Sciences and Engineering (ECCOMAS 2004) (Eds. P.Neittaanmäki, T.Rossi, K.Majava, O.Pironneau), Paper 94;
University of Jyväskylä, Jyväskylä, Finland, 2004.

Drabek T., Böhm H.J.:
Implementation of Nonlocal Damage Models in Commerical FE-Codes;
in Computational Mechanics. Proceedings of the Sixth World Congress on Computational Mechanics (Eds.: Z.H.Yao, M.W.Yuan, W.X.Zhong), paper 262;
Tsinghua University Press and Springer-Verlag, Beijing, 2004.

Wiest M., Daves W., Fischer F.D., Blumauer H.:
Dreidimensionale volldynamische Finite Element Analyse des Überrollens eines Herzstückes;
in ABAQUS Austria Anwenderkonferenz 2004, paper 7;
ABAQUS Inc., Providence, RI, 2004.




Monographs


Gamsjäger E.:
Diffusional Phase Transformation in Low Alloy Steels – Theory and Application to Continuous Casting.
VDI Fortschrittberichte, Reihe 5, Nr.672; VDI Verlag, Düsseldorf, 2003.




Doctoral Theses


Eckschlager, A.:
Simulation of Particle Failure in Particle Reinforced Ductile Matrix Composites.
Doctoral Thesis, TU Wien, Vienna, Austria, 2002.

Gamsjäger E.:
Diffusional Phase Transformation in Low Alloy Steels – Theory and Application to Continuous Casting.
Doctoral Thesis, Montanuniversität Leoben, Austria, 2002.

Drabek T.:
Modeling of Matrix Damage in Particle Reinforced Ductile Matrix Composites, Doctoral Thesis, TU Wien, Vienna, Austria, 2005.



revised 050221 hjb

ILSB Home CDL-FMD Home CDG Home IfM Home