ILSB Homepage Institut für
Leichtbau und Struktur-Biomechanik
TU Wien

ILSB Home Allgemeines Lehre Forschung Team Links Suche Intranet

ILSB PUBLIKATIONEN  -  GESAMTLISTE 2011



Baumbach F., Schmidt R., Varga P., Heinz T., Vécsei V., Zysset P.K.:
Where is the Distal Fracture Line Location of Dorsally Displaced Distal Radius Fractures?
J.Orthop.Res. 29, 489-494, 2011.

Bilik C., Rammerstorfer F.G.:
Instabilitäten während des Walzens von Profilen und im Einsatz von gewalzten Profilen;
in XXX. Verformungskundliches Kolloquium (Ed. B. Buchmayr), pp. 93-96;
Montanuniversität Leoben, Leoben, 2011.

Bilik C., Rammerstorfer F.G., Figala G., Buchmayr B.:
Computational Modelling of Laser Treatment of Plates for Increased Buckling Loads and Natural Frequencies;
J.Mech.Engng.Sci. 225, 2385-2398, 2011.

Böhm H.J., Pettermann H.E., Nogales S.:
Continuum Modeling of Diffusive Transport in Inhomogeneous Solids;
in Heat Transfer in Multi-Phase Materials (Eds. A.Öchsner, G.Murch), pp. 3-32;
Springer-Verlag, Berlin, 2011.

Brynk T., Hellmich C., Fritsch A., Zysset P.K., Eberhardsteiner J.:
Experimental Poromechanics of Trabecular Bone Strength: Role of Terzaghi's Effective Stress and of Tissue Level Stress Fluctuations;
J.Biomech. 44, 501-508, 2011.

Dall'Ara E., Öhman C., Baleani M., Viceconti M.:
Reduced Tissue Hardness of Tabecular Bone is Associated with Severe Osteoarthritis;
J.Biomech. 44, 1593-1598, 2011.

Dall'Ara E., Varga P., Pahr D.H., Zysset P.K.:
A Calibration Methodology of QCT BMD for Human Vertebral Body with Registered Micro-CT Images;
Med.Phys. 38, 2602-2608, 2011.

Duschlbauer D., Böhm H.J., Pettermann H.E.:
Modeling Interfacial Effects on the Thermal Conduction Behavior of Short Fiber Reinforced Composites;
Int.J.Mater.Res. 2011/6, 717-726, 2011.

Flatscher T., Pettermann H.E.:
A Constitutive Model for Fiber-Reinforced Polymer Plies Accounting for Plasticity and Brittle Damage Including Softening - Implementation for Implicit FEM;
Compos.Struct. 93, 2241-2249, 2011.

Flatscher T., Daxner T., Pahr D.H., Rammerstorfer F.G.:
Optimization of Corrugated Paperboard under Local and Global Buckling Constraints;
in Multiscale Methods in Computational Mechanics (Eds. R.de Borst, E.Ramm), pp. 329-346;
Springer-Verlag, Dordrecht, 2011.

Gager J., Flatscher T., Pettermann H.E.:
Elasto-Plasto-Damage Modeling of FRP Fabrics - A Shell Unit Cell Approach;
in Proceedings of the 3rd ECCOMAS Thematic Conference on the Mechanical Response of Composites (Eds. R.Rolfes, E.Jansen, pp. 279-286;
Leibniz Univerisität Hannover, Hannover, 2011.

Kinzl M., Boger A., Zysset P.K., Pahr D.H.:
The Effects of Bone and Pore Volume Fraction on the Mechanical Properties of PMMA/Bone Biopsies Extracted from Augmented Vertebrae;
J.Biomech. 44, 2732-2736, 2011.

Kuhn A., Palau T., Schlager G., Böhm H.J., Nogales S., Oancea V., Roy R., Rauh A., Lescheticky J.:
CoMModO - Complex Material Modelling Operations: A Comprehensive Approach to the Modelling of Complex Materials with Machine Learning Models within Finite Element Simulations;
in Proceedings of the 10th International Conference on Modeling and Applied Simulation (Eds. A.Bruzzone, C.Frydman, M.Massei, M.McGinnis, M.A.Piera, G.Zacharewicz), pp. 80-89;
Universitá di Genova, Genoa, 2011.

Monetti R.A., Sidorenko I., Räth C., Bauer J., Müller D., Rummeny E., Matsuura M., Lochmüller E.M., Eckstein F., Zysset P.K.:
Structure-Based Classification of μ-CT Images of Human Bone Using Local Minkowski Functionals;
in Biomedical Applications in Molecular, Structural and Functional Imaging (Eds. J.B.Weaver, R.C.Molthen), Paper 79695K;
SPIE, Bellingham, WA, 2011.

Paschalis E.P., Tatakis D.N., Robins S., Fratzl P., Manjubala I., Zöhrer R., Gamsjäger S., Buchinger B., Roschger A., Phipps R., Boskey A.L., Dall'Ara E., Varga P., Zysset P., Klaushofer K., Roschger P.:
Lathyrism-Induced Alterations in Collagen Cross-Links Influence the Mechanical Properties of Bone Material without Affecting the Mineral
Bone 49, 1232-1241, 2011.

Patsch J.M., Kiefer F.W., Varga P., Pail P., Rauner M., Stupphann D., Resch H., Moser D., Zysset P.K., Stulnig T.M., Pietschmann P.:
Increased Bone Resorption and Impaired Bone Microarchitecture in Short-Term and Extended High-Fat Diet-Induced Obesity;
Metablolism 60, 243-249, 2011.

Reisinger A.G., Pahr D.H., Zysset P.K.:
Elastic Anisotropy of Bone Lamellae as a Function of Fibril Orientation Pattern;
Biomech.Model.Mechanobiol. 10, 67-77, 2011.

Reisinger A.G., Pahr D.H., Zysset P.K.:
Principal Stiffness Orientation and Degree of Anisotropy of Human Osteons Based on Nanoindentation in Three Distinct Planes;
J.Mech.Behav.Biomed.Mater. 4, 2113-2127, 2011.

Schwiedrzik J.J., Kaudela K.H., Burner U., Zysset P.K.:
Fabric-Mechanical Property Relationships of Trabecular Bone Allografts are Altered by Supercritical CO2 Treatment and Gamma Sterilization;
Bone 48, 1370-1377, 2011.

Sidorenko I., Monetti R., Bauer J., Müller D., Rummeny E., Eckstein F., Matsuura M., Lochmüller E.M., Zysset P.K., Räth C.:
Assessing Methods for Characterising Local and Global Structural and Biomechanical Properties of the Trabecular Bone Network;
Curr.Med.Chemist. 18, 3492-3409, 2011.

Sipos W., Kralicek E., Rauner M., Duvigneau C.J., Worliczek H.L., Scharnall D., Hartl R.T., Sommerfeld-Stur I., Dall'Ara E., Varga P., Resch H., Schwendenwein I., Zysset P.K., Pietschmann P.:
Bone and Cellular Immune System of Multiparous Sows are Insensitive to Ovariectomy and Nutritive Calcium Shortage;
Horm.Metab.Res. 43, 404-409, 2011.

Sipos W., Zysset P., Kostenuik P., Mayrhofer E., Bogdan C., Rauner M., Stolina M., Dwyer D., Sommerfeld-Stur I., Pendl G., Resch H., Dall'Ara E., Varga P., Pietschmann P.:
OPG-Fc Treatment in Growing Pigs Leads to Rapid Reductions in Bone Resorption Markers, Serum Calcium, and Bone Formation Markers;
Horm.Metab.Res. 43, 944-949, 2011.

Spiesz E., Kaminsky W., Zysset P.K.:
A Quantitative Collagen Fibers Orientation Assessment Using Birefringence Measurements: Calibration and Application to Human Osteons;
J.Struct.Biol. 176, 302-306, 2011.

Stampfl J., Pettermann H.E., Liska R.:
Bioinspired Cellular Structures: Additive Manufacturing and Mechanical Properties;
in Biomimetics - Materials, Structures and Processes (Eds. P.Gruber, D.Bruckner, C.Hellmich, H.B.Schmiedmayer, H.Stachelberger, I.C.Gebeshuber), pp. 105-123;
Springer-Verlag, Berlin, 2011.

Stampfl J., Pettermann H.E., Luxner M.H.:
Three-Dimensional Open Cell Structures: Evaluation and Fabrication by Additive Manufacturing;
in Fabrication and Characterization in the Micro-Nano Range (Eds. F.A.Lasagni, A.F.Lasagni), pp. 95-117;
Springer-Verlag, Berlin, 2011.

Todt M., Rammerstorfer F.G., Fischer F.D., Mayrhofer P.H., Holec D., Hartmann M.A.:
Continuum Modeling of van der Waals Interactions between Carbon Onion Layers;
Carbon 49, 1620-1627, 2011.

Todt M., Rammerstorfer F.G., Hartmann M.A., Paris O., Fischer F.D.:
Shell-Models for Multi-Layer Carbon Nano-Particles;
in Shell-Like Structures (Eds. H.Altenbach, V.A.Eremeyev), pp. 585-602;
Springer-Verlag, Berlin, 2011.

Varga P., Dall'Ara E., Pahr D.H., Pretterklieber M., Zysset P.H.:
Validation of an HR-pQCT-Based Homogenized Finite Element Approach Using Mechanical Testing of Ultra-Distal Radius Sections;
Biomech.Model.Mechanobiol. 10, 431-444, 2011.

Weninger P., Dall'Ara E., Drobetz H., Nemec A., Redl H., Hertz H., Zysset P.K.:
Multidirectional Volar Fixed-Angle plating Using Cancellous Locking Screws for Distal Radius Fractures - Evaluation of Three Screw Configurations in an Extra-Articular Fracture Model;
Wiener Klin.Wochenschr. 123, 4-10, 2011.

Wolfahrt M., Cichosz J., Gager J., Hinterhölzl R., Pettermann H.E., Frieß S., Pinter G., Noisternig J.:
Werkstoffcharakterisierung, Materialmodellierung und Simulation von CFK-Geflechtlaminaten;
in 20. Leobner Kunststoff-Kolloquium, pp. 101-110;
Montanuniversität Leoben, 2011.

Wolfram U., Wilke H.J., Zysset P.K.:
Damage Accumulation in Vertebral Trabecular Bone Depens on Loading Mode and Direction;
J.Biomech. 44, 1164-1169, 2011.


revised 120208 (hjb)
TU-MWB Home

ILSB Home Allgemeines Lehre Forschung Team Links Suche Intranet