ILSB Homepage Institut für
Leichtbau und Struktur-Biomechanik
TU Wien

ILSB Home Allgemeines Lehre Forschung Team Links Suche Intranet

ILSB PUBLIKATIONEN  -  GESAMTLISTE 2013



Dall'Ara E., Karl C., Mazza G., Franzoso G., Vena P., Pretterklieber M., Pahr D., Zysset P.:
Tissue Properties of the Human Vertebral Body Sub-Structures Evaluated by Means of Microindentation;
J.Mech.Beh.Biomed.Mater. 25, 23-32, 2013.

Dall'Ara E., Luisier B., Schmidt R., Kainberger F., Zysset P.K., Pahr D.:
A Nonlinear QCT-Based Finite Element Model Validation Study for the Human Femur Tested in Two Configurations in Vitro;
Bone 52, 27-31, 2013.

Dall'Ara E., Luisier B., Schmidt R., Pretterklieber M., Kainberger F., Zysset P.K., Pahr D.:
DXA Predictions of Human Femoral Mechanical Properties Depend on the Load Configuation;
Med.Engng.Phys. 35, 1564-1572, 2013.

Daum B., Dehm G., Clemens H., Rester M., Fischer F.D., Rammerstorfer F.G.:
Elastoplastic Buckling as Source of Misinterpretation of Micropillar Tests;
Acta mater. 61, 4996-5007, 2013.

Farahmand P., Marin F., Hawkins F., Möricke R., Ringe J.D., Glüer C.C., Papaioannu N., Minisola S., Martínez G., Nolla J.M., Niedhart C., Guañabens N., Nuti R., Martín-Mola E., Thomasius F., Peña J., Graeff C., Kapetanos G., Petto H., Gentzel A., Reisinger A.G., Zysset P.K.:
Early Changes in Biochemical Markers of Bone Formation During Teriparatide Therapy Correlate with Improvements in Vertebral Strength in Men with Glucocorticoid-Induced Osteoporosis; Osteoporos.Int. 24, 2971-2981, 2013.

Flatscher T., Schuecker C., Pettermann H.E.:
A Constitutive Ply Model for Stiffness Degradation and Plastic Strain Accumulation: Its Application to the Third World Wide Failure Exercise (Part A);
J.Compos.Mater. 47, 2575-2593, 2013.

Gager J., Meindlhumer M., Schwab M., Pettermann H.E.:
Numerically Predicted Damage and Failure Envelopes of Composites Featuring Nonlinear Material Behavior;
in Proceedings of the 19th International Conference on Composite Materials (Eds. S.V.Hoa, P.Hubert), pp. 2145-2153;
BytePress, Toronto, 2013.

Glüer C.C., Marin F., Ringe J.D., Hawkins F., Möricke R., Papaioannu N., Farahmand P., Minisola S., Martínez G., Nolla J.M., Niedhart C., Guañabens N., Nuti R., Martín-Mola E., Thomasius F., Kapetanos G., Peña J., Graeff C., Petto H., Sanz B., Reisinger A., Zysset P.:
Comparative Effects of Teriparatide and Risedronate in Glucocorticoid-Induced Osteoporosis in Men: 18-Month Results of the EuroGIOPs Trial;
J.Bone Miner.Res. 28, 1355-1368, 2013.

Gross T., Pahr D.H., Zysset P.K.:
Morphology–Elasticity Relationships Using Decreasing Fabric Information of Human Trabecular Bone from Three Major Anatomical Locations;
Biomech.Modell.Mechanobiol. 12, 793-800, 2013.

Gross T., Pahr D.H.:
Influence of Mesh Size and Element Type on Apparent Yield Properties of microCT Based Finite Element Models of Human Trabecular Bone;
in Computational Vision and Medical Image Processing VIPimage 2013 (Eds. J.M. Tavares, R.M. Natal Jorge), pp.415-417;
CRC Press/Balkema, Leiden, 2013.

Graeff C., Marin F., Petto H., Kayser O., Reisinger A., Peña J., Zysset P., Glüer C.C.:
High-Resolution Quantitative Computed Tomography-Based Assessment of Trabecular Microstructure and Strength Estimates by Finite-Element Analysis of the Spine, but not DXA, Reflects Vertebral Fracture Status in Men with Glucocorticoid-Induced Osteoporosis;
Bone 52, 568-577, 2013.

Hartmann M.A., Todt M., Rammerstorfer F.G., Fischer F.D., Paris O.:
Elastic Properties of Graphene Obtained by Computational Mechanical Tests;
Europhys.Lett. 103, 68004, 2013.

Kersh M.E., Zysset P.K., Pahr D.H., Wolfram U., Larsson D., Pandy M.G.:
Measurement of Structrual Anisotropy in Femoral Trabecular Bone Using Clinical-Resolution CT Images;
J.Biomech. 46, 2659-2666, 2013.

Kinzl M., Wolfram U., Pahr D.H.:
Identification of a Crushable Foam Material Model and Application to Strength and Damage Prediction of Human Femur and Vertebral Body;
Biomed.Mater. 26, 136-147, 2013.

Kinzl M., Schwiedrzik J., Zysset P.K., Pahr D.H.:
An Experimentally Validated Finite Element Method for Augmented Vertebral Bodies;
Clin.Biomech. 28, 15-22, 2013.

Kravchenko G., Karunamurhty B., Nelhiebl M., Pettermann H.E.:
Finite Element Analysis of Fatigue Cracks in Power Metallisation of a Semiconductor Device Subjected to Active Cycling;
in Proceedings of the 14th Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystem, paper 91;
IEEE, Piscatawy, NJ, 2013.

Matveeva A.Y., Böhm H.J., van Hattum F.W.J.:
Seminanalytical Stiffness Tensor Approximation for Polymers Reinforced with Curved Nanotubes;
in Proceedings of Composites Week at Leuven 2013 and TexComp-11 Conference, Ed. A.W. van Vuure;
Katholieke Universiteit Leuven, Leuven, 2013.

Pahr D.H., Zysset P.K.:
FE-Simulation in der klinischen Osteoporoseforschung;
Osteologie 22, 7-12, 2013.

Pahr D.H., Zysset P.K.:
FE-Simulation in der klinischen Osteoporoseforschung: Möglichkeiten und Trends;
Journal für Mineralstoffwechsel 20, 95-100, 2013.

Pettermann H.E., Rama Lista E., Gager J.:
Delamination Induced Ply Damage - Nonlinear Simulations Accounting for Degradation of Layer and Interface Properties Simultaneously;
in (Eds. A.Suleman, P.Camanho), paper #31; IDMEC, Lisboa, 2013.

Rodríguez J., Weinbub J., Pahr D., Rupp K., Selberherr S.:
Distributed High-Performance Parallel Mesh Generation with ViennaMesh;
in Applied Parallel and Scientific Computing (Eds. P.Manninen, P.Öster), pp. 548-552,
Springer-Verlag, Berlin, 2013.

Schwiedrzik J.J., Zysset P.K.:
An Anisotropic Elastic-Viscoplastic Damage Model for Bone Tissue;
Biomech.Modell.Mechanobiol. 12, 201-213, 2013.

Spiesz E.M., Reisinger A.G., Kaminsky W., Roschger P., Pahr D.H., Zysset P.K.:
Computational and Experimental Methodology for Site-Matched Investigations of the Influence of Mineral mass Fraction and Collagen Orientation on the Axial Indentation Modulus of Lamellar Bone;
J.Mech.Beh.Biomed.Mater. 28, 195-205, 2013.

Todt M., Rammerstorfer F.G., Hartmann M.A.:
Continuum Shell Models for Closed Cage Carbon Nanoparticles;
in Shell Structures: Theory and Applications (Eds. W.Pietraszkiewicz, J.Górski), pp.149-152;
CRC Press/Balkema, Leiden, 2013.

Toth F., Rammerstorfer F.G., Cordill M.J., Fischer F.D.:
Detailed Modelling of Delamination Buckling of Thin Films under Global Tension;
Acta mater. 61, 2425-2433, 2013.

Tsegai Z.J., Kivell T.L., Gross T., Nguyen N.H., Pahr D.H., Smaers J.B., Skinner M.M.:
Trabecular Bone Structure Correlates with Hand Posture and Use in Hominoids;
PLoS ONE 8(11):e78781, 2013.

Toth F., Rammerstorfer F.G., Cordill M.J., Fischer F.D.:
Modelling of Thin Film Buckling in Compound Specimens under Uniaxial Stretching;
in Shell Structures: Theory and Applications (Eds. W.Pietraszkiewicz, J.Górski), pp.247-250;
CRC Press/Balkema, Leiden, 2013.

Varga P., Schefzig P., Unger E., Mayr W., Zysset P.K., Erhart J.:
Finite Element Based Estimation of Contact Areas and Pressures of the Human Scaphoid in Various Functional Positions of the Hand;
J.Biomech. 46, 984-990, 2013.

Wolfahrt M., Cichosz J., Gager J., Fleischmann M.:
Materialmodellierung von kohlenstofffaserverstärkten Geflechtlaminaten;
lightweight-design 6/2013, 42-48.

Zysset P.K., Dall'Ara E., Varga P., Pahr D.K.:
Finite Element Analysis for Prediction of Bone Strength;
BoneKey Reports 2, Article #386, 2013.


revised 140226 (hjb)
TU-MWB Home

ILSB Home Allgemeines Lehre Forschung Team Links Suche Intranet