ILSB Homepage Institut für
Leichtbau und Struktur-Biomechanik
TU Wien

ILSB Home Allgemeines Lehre Forschung Team Links Suche Intranet

ILSB PUBLIKATIONEN  -  GESAMTLISTE 2004



Böhm H.J. (Ed.):
Mechanics of Microstructured Materials.
CISM Courses and Lectures, Vol.464, Springer-Verlag, Vienna, 2004.

Böhm H.J.:
Continuum Models for the Thermomechanical Behavior of Discontinuously Reinforced Materials;
Adv.Engng.Mater. 6, 626-633, 2004.
DOI: 10.1002/adem.200400026

Böhm H.J.:
A Short Introduction to Continuum Micromechanics;
in Mechanics of Microstructured Materials (Ed.: H.J.Böhm), pp. 1-40; CISM Courses and Lectures Vol.464, Springer-Verlag, Vienna, 2004.
DOI: 10.1007/978-3-7091-2776-6_1

Böhm H.J.:
Modeling the Mechanical Behavior of Short Fiber Reinforced Composites;
in Mechanics of Microstructured Materials (Ed.: H.J.Böhm), pp. 41-56; CISM Courses and Lectures Vol.464, Springer-Verlag, Vienna, 2004.
DOI: 10.1007/978-3-7091-2776-6_2

Böhm H.J., Drabek T.:
Implementierung nichtlokaler duktiler Schädigungsmodelle in ABAQUS/Standard:
in ABAQUS Austria Anwenderkonferenz 2004, paper 1;
ABAQUS Inc., Providence, RI, 2004.

Böhm H.J., Han W., Eckschlager A.:
Multi-Inclusion Unit Cell Studies of Reinforcement Stresses and Particle Failure in Discontinuously Reinforced Ductile Matrix Composites;
Comput.Model.Engng.Sci. 5, 5-20, 2004.
DOI: 10.3970/cmes.2004.005.005

Böhm H.J., Duschlbauer D., Drabek T., Chimani C.:
Finite Element Based Micromechanical Model of Ductile Intergranular Cracks in Columnar Two-Phase System;
in Computational Mechanics. Proceedings of the Sixth World Congress on Computational Mechanics (Eds.: Z.H.Yao, M.W.Yuan, W.X.Zhong), paper 258; Tsinghua University Press and Springer-Verlag, Beijing, 2004.

Böhm H.J., Duschlbauer D., Drabek T., Kolednik O., Shan G.X., Chimani C.:
Numerical Studies of Crack Sensitivity under Continuous Casting Conditions;
in: Proceedings of the VAI Continuous Casting and Hot-Rolling Conference CCR'04, Paper 6.2; VAI, Linz, Austria, 2004.

Daxner T., Luxner M.H., Rammerstorfer F.G.:
Thermo-Mechanically Interacting Composite Pipes Optimised by Genetic Algorithms;
in: Proceedings of the 11th European Conference on Composite Materials, Paper C041; European Society of Composite Materials, London, 2004.

Daxner T., Rammerstorfer F.G., Fischer F.D.:
Simulation of Material and Structural Instability Phenomena During the Flaring Process of Cylindrical Shells;
in: Proceedings of NUMIFORM 2004 (Eds. S. Ghosh, J.M. Castro, J.K. Lee), pp. 1887-1892; American Institute of Physics, Melville, NY, 2004.
DOI: 10.1063/1.1766808

Daxner T., Rammerstorfer F.G., Fischer F.D.:
Flaring of Cylindrical Shells and Associated Instability Phenomena;
in Computational Mechanics. Proceedings of the Sixth World Congress on Computational Mechanics (Eds.: Z.H.Yao, M.W.Yuan, W.X.Zhong), paper 513; Tsinghua University Press and Springer-Verlag, Beijing, 2004.

Drabek T., Böhm H.J.:
Simulation of Ductile Damage in Metal Matrix Composites;
in: Proceedings of NUMIFORM 2004 (Eds. S. Ghosh, J.M. Castro, J.K. Lee), pp. 1857-1862; American Institute of Physics, Melville, NY, 2004.
DOI: 10.1063/1.1766803

Drabek T., Böhm H.J.:
Unit Cell Studies of Ductile Damage in Fiber Reinforced Metal Matrix Composites;
in: Proceedings of the 4th European Congress on Computational Methods in Applied Sciences and Engineering (ECCOMAS 2004) (Eds. P.Neittaanmäki, T.Rossi, K.Majava, O.Pironneau), Paper 94; University of Jyväskylä, Jyväskylä, Finland, 2004.

Drabek T., Böhm H.J.:
Implementation of Nonlocal Damage Models in Commerical FE-Codes;
in Computational Mechanics. Proceedings of the Sixth World Congress on Computational Mechanics (Eds.: Z.H.Yao, M.W.Yuan, W.X.Zhong), paper 262; Tsinghua University Press and Springer-Verlag, Beijing, 2004.

Duschlbauer D.:
Computational Simulation of the Thermal Conductivity of MMCs under Consideration of the Inclusion-Matrix Interface.
VDI-Verlag (Reihe 5, Nr. 691), Düsseldorf, 2004.

Luxner M.H., Daxner T., Rammerstorfer F.G.:
Optimization of Mechanically Coupled Composite Pipes by Genetic Algorithms;
Proc.Appl.Mech.Math. 4, 620-621, 2004.
DOI: 10.1002/pamm.200410291

Luxner M.H., J. Stampfl J., Pettermann H.E.:
Linear and Nonlinear Numerical Investigations of Regular Open Cell Structures;
in Proceedings of the 2004 ASME International Mechanical Engineering Conference, paper IMECE2004-62545; ASME, New York, 2004.
DOI: 10.1115/IMECE2004-62545

Pahr D.H., Rammerstofer F.G.:
A Fast Multi-Scale Analyzing Tool for the Investigation of Perforated Laminates;
Comput.Struct. 82, 227-239, 2004.
DOI: 10.1016/j.compstruc.2003.10.010

Pahr D.H., Rammerstorfer F.G.:
Experimental and Numerical Investigations of Perforated CFR Woven Fabric Laminates;
Compos.Sci.Technol. 64, 1403-1410, 2004.
DOI: 10.1016/j.compscitech.2003.11.001

Pahr D.H., Marte C., Rammerstorfer F.G., Böhm H.J.:
Hierarchical Modelling of Perforated Woven Fabric Laminates;
in: Proceedings of the 4th European Congress on Computational Methods in Applied Sciences and Engineering (ECCOMAS 2004) (Eds. P.Neittaanmäki, T.Rossi, S.Korotov, E.Oñate, J.Périaux, D.Knörzer), Paper 863; University of Jyväskylä, Jyväskylä, Finland, 2004.

Pahr D.H., Schuecker C., Rammerstorfer F.G., Pettermann H.E.:
Numerical Investigations of Perforated Laminates in the Presence of Residual Ply Stresses;
J.Compos.Mater. 38, 1977-1991, 2004.
DOI: 10.1177/0021998304044771

Pahr D.H. Schuecker C., Rammerstorfer F.G., Pettermann H.E.:
Investigations of Perforated Laminates in the Presence of Residual Stress;
in: Proceedings of the 11th European Conference on Composite Materials, Paper C151; European Society of Composite Materials, London, 2004.

Rammerstorfer F.G., Pahr D.H., Daxner T., Vonach W.K.:
Buckling in Thin Walled Macro and Meso Structures of Lightweight Materials and Material Compounds;
in Computational Mechanics. Proceedings of the Sixth World Congress on Computational Mechanics (Eds.: Z.H.Yao, M.W.Yuan, W.X.Zhong), pp. 570-575; Tsinghua University Press and Springer-Verlag, Beijing, 2004.
DOI: 0.1007/s00466-005-0731-0

Schuecker C., Pahr D.H., Pettermann H.E.:
Numerical Simulation of Composite Structures - First Ply Failure under Non-Proportional Loading;
in: Multiscaling in Applied Science and Emerging Technology (Eds. G.C. Sih, T.B. Kermanidis, S.G. Pantelakis), pp. 280-286; University of Patras, Patras, 2004.

Skrna-Jakl I.C., Rammerstofer F.G.:
Leichtbau mit Faserverbundwerkstoffen, Teil 1;
Architektur & Bauforum - Forum 246, 9-11, 2004.

Skrna-Jakl I.C., Rammerstofer F.G.:
Leichtbau mit Faserverbundwerkstoffen, Teil 2;
Architektur & Bauforum - Forum 250, 9-11, 2004.

Stampfl J., Seyr M.M., Luxner M.H., Pettermann H.E., Woesz A., Fratzl P.:
Regular, Low Density Cellular Structures-Rapid Prototyping, Numerical Simulation, Mechanical Testing
in: Biological and Bioinspired Materials and Devices, Mater.Res.Soc.Symp.Proc. 823 (Eds. J. Aizenberg, W.J. Landis, C. Orme, R. Wang), paper W8.8; Materials Research Society, Warrendale, PA, 2004.
DOI: 10.1557/PROC-823-W8.8


revised 180602 (hjb)
TU-MWB Home

ILSB Home Allgemeines Lehre Forschung Team Links Suche Intranet