Institute of Lightweight Design and Structural Biomechanics

DOCTORAL THESES

in Micromechanics of Materials and Related Fields

• Sendeckyj, George P.:
  Ellipsoidal Inhomogeneity Problem.
  Northwestern University, Evanston, IL, 1967.
  [Top]

1968

• Rosen, B. Walter:
  Thermal Expansion Coefficients of Composite Materials.
  University of Pennsylvania, Philadelphia, PA, 1968.
• Whitney, James M.:
  A Study of the Effects of Coupling between Bending and Stretching on the Mechanical Behavior of Layered Anisotropic Materials.
  Ohio State University, Columbus, OH, 1968.
  [Top]

1969

• Bui, Huy Duong:
  Étude de l' évolution de la frontiere du domaine élastique avec l' écrouissage et relations de comportement élasto-plastique des métaux cubiques.
  Université de Paris, France, 1969.
  [Top]

1970

• Stevenson, J. Frederick:
  Discrete-Element Microstress Analysis of Unidirectional Fiber Composites.
  Case Western Reserve University, Cleveland, OH, 1970.
• Zaoui, André:
  Étude de l'influence propre de la désorientation des grains sur le comportement viscoplastique de métaux polycristallins (système c.f.c).
  Université de Paris, France, 1970.
  [Top]

1972

• Agarwal, Bhagwan D.:
  Micromechanical Analysis of Composite Materials Using Finite Element Methods.
  Illinois Institute of Technology, Chicago, IL, 1972.
• Crossman, Frank W.:
  Computer Simulation of the Deformation of Composite Materials by Finite Element Analysis.
  Stanford University, Stanford, CA, 1972.
• Elsayed, Mostafa A.:
  Bounds for Effective Thermal, Electrical and Magnetic Properties of Heterogeneous Materials in Terms of High Order Statistical Information.
  University of Pennsylvania, Philadelphia, PA, 1972.
• Haberl, Gerhard:
  Theoretische Bestimmung der Eigenschaften faserverstärkter Werkstoffe bei Belastung quer zur Faserrichtung.
  TU Wien, Vienna, Austria, 1972.
• Silnutzer, Norman R.:
  Effective Constants of Statistically Homogeneous Materials.
  University of Pennsylvania, Philadelphia, PA, 1972.
  [Top]

1973

• Navi, Parviz:
  Harmonic Wave Propagation in Composite Materials.
  UCLA, Los Angeles, CA, 1973.
• Stroeven, Piet:
  Some Aspects of the Micromechanics of Concrete.
  TU Delft, The Netherlands, 1973.
  [Top]

1974

• Kang S.I.:
  Determination of Effective Moduli of Composites by a Three-Dimensional Finite Element Method.
  Georgia Institute of Technology, Atlanta, GA, 1974.
• Liu, Chen Hsien:
  The Elastic-Plastic Behavior of Composite Materials.
  Yale University, New Haven, CT, 1974.
• Rao, Muppavarapu S.M.:
  Plasticity Theory of Fiber-Reinforced Metal Matrix Composites.
  Duke University, Durham, NC, 1974.
  [Top]

1975

• Gurson, Arthur L.:
  Plastic Flow and Fracture Behavior of Ductile Materials Incorporating Void Nucleation.
  Brown University, Providence, RI, 1975.
• Moschovidis, Zissis A.:
  Two Ellipsoidal Inhomogeneities and Related Problems Treated by the Equivalent Inclusion Method.
  Northwestern University, Evanston, IL, 1975.
  [Top]

1976

• Miller, A. Keith:
  Micromechanical Aspects of the Environmental Behavior of Composite Materials.
  University of Wyoming, Laramie, WY, 1976.
  [Top]

1977

• Chen, Hsiao-Chen:
  The Effective Properties of Composite Materials and Suspensions.
  Stanford University, Stanford, CA, 1977.
• Cheng, Paul C.H.:
  Elastic Field of Inclusion and Crack in Anisotropic Media.
  Northwestern University, Evanston, IL, 1977.
• Lai, Ting-Kwan:
  Thermal Stresses due to Disturbance of Uniform Heat Flow by an Ellipsoidal Inclusion.
  Northwestern University, Evanston, IL, 1977.
  [Top]

1978

• Berveiller, Marcel:
  Contribution à l'étude du comportement plastique et des textures de déformation des polycristaux métalliques.
  Université de Paris XIII, Villetaneuse, France, 1978.
• Curiskis, John I.:
  A Study of the Micromechanics of Fibrous-Reinforced Composite Materials Using Finite-Element Techniques.
  University of New South Wales, Sydney, Australia, 1978.
  [Top]

1979

• Bahei-el-Din, Yehia A.:
  Plastic Analysis of Metal Matrix Composite Laminates.
  Duke University, Durham, NC, 1979.
• Johnson, W. Stephen:
  Characterization of Fatigue Damage in Continuous Fiber Reinforced Metal Matrix Composites.
  Duke University, Durham, NC, 1979.
  [Top]

1980

• Deeg, Wolfgang F.:
  The Analysis of Dislocation, Crack, and Inclusion Problems in Piezoelectric Solids.
  Stanford University, Stanford, CA, 1980.
• Dumontet, Hélène:
  Homogénéisation des matériaux stratifiés de type élastique lineaire, nonlineaire, viscoélastique.
  Université Pierre et Marie Curie, Paris, France, 1980.
• Griffin, O. Hayden:
  Three-Dimensional Inelastic Finite Element Analysis of Laminated Composites.
  Virginia Polytechnic Institute and State University, Blacksburg, VA, 1980.
• Johnson, William C.:
  The Elasto-Plastic Behavior of Inclusions.
  Michigan Technological University, Houghton, MI, 1980.
• Nomura, Seiichi:
  Micromechanics of Short-Fiber Composite.
  University of Delaware, Newark, DE, 1980.
• Torquato, Salvatore:
  Microscopic Approach to Transport in Two-Phase Random Media.
  SUNY, Stony Brook, NY, 1980.
  [Top]

1981

• Inglebert, Geneviève:
  Analyse simplifiée des structures élastoplastiques sous chargements cycliques.
  Université Pierre et Marie Curie, Paris, France, 1981.
  [Top]

1982

• Buryachenko, Valerij A.:
  Prediction of Physicomechanical Properties of Composite Materials.
  Moscow Institute of Chemical Engineering, Moscow, Russia, 1982.
• Caillerie, Denis:
  Étude de quelques problèmes de perturbation en théorie de l'élasticité et de la conduction thermique.
  Université Pierre et Marie Curie, Paris, France, 1982.
• Francfort, Gilles A.:
  Two Variational Problems in Thermoelasticity: 1. Homogeneization, 2. Material Momenta.
  Stanford University, Stanford, CA, 1982.
• Suquet, Pierre M.:
  Plasticité et homogénéisation.
  Université Pierre et Marie Curie, Paris, France, 1982.
  [Top]

1983

• Chiang, Chun-Ron:
  Micromechanical Determination of Polycrystal Plasticity, and Some Considerations of Composite Elasticity.
  Rutgers University, New Brunswick, NJ, 1983.
• Nunan, Kevin C.:
  Effective Properties of Composite Media Containing Periodic Arrays of Spheres.
  Stanford University, Stanford, CA, 1983.
• Ostoja-Starzewski, Martin:
  Microdynamics of Structured Solids.
  McGill University, Montreal, PQ, Canada, 1983.
  [Top]

1984

• Kim, Kitae:
  The Hollow Sphere Model for Porous Metals and Metal Powders.
  UCB, Berkeley, CA, 1984.
• Léné, Françoise:
  Contribution à l'étude des matériaux composites et de leur endommagement.
  Université Pierre et Marie Curie, Paris, France, 1984.
• Mahishi, Jayant M.:
  An Integrated Three-Dimensional Micromechanical Approach to Fracture Behavior of Fiber-Reinforced Composites.
  University of Wyoming, Laramie, WY, 1984.
• Teply, Jan L.:
  Periodic Hexagonal Array Models for Plasticity Analysis of Composite Materials.
  University of Utah, Salt Lake City, UT, 1984.
• Weill, F.:
  Application de la théorie de l'homogénéisation à l'étude élastique et à la rupture de composites résine-fibres de verre.
  Université de Nantes, France, 1984.
  [Top]

1985

• Fassi-Fehri, Omar:
  Le problème de la paire d'inclusions plastiques et hétérogènes dans une matrice anisotrope - Application à l'étude du comportement des matériaux composites et de la plasticité.
  Université de Metz, France, 1985.
• Gilormini, Pierre:
  Le problème de l'inclusion en viscoplasticité: Application à l'amorçage de l'endommagement.
  Université Joseph Fourier, Grenoble, France, 1985.
• Rau, Jahn:
  Zum mechanischen Verhalten von Verbundwerkstoffen mit metallischer Matrix.
  Universität des Saarlandes, Saarbrücken, Germany, 1985.
  [Top]

1986

• Accorsi, Michael L.:
  Micromechanically Based Constitutive Relations for Periodic Composites with Elastic, Elastoplastic and Nonlinear Creep Material Behavior.
  Northwestern University, Evanston, IL, 1986.
• Brou, Kassi André:
  Résolution de deux problémes par la méthode des éléments finis: 1. Tube cylindrique soumis á une charge concentrée. 2. Matériau composite á fibres courtes en traction.
  Université du Maine, Le Mans, France, 1986.
• Carman, Richard A.:
  Micromechanics of Porous Media.
  UCB, Berkeley, CA, 1986.
• Jasiuk, Iwona M.:
  The Sliding Inclusion in Three-Dimensional Elasticity.
  Northwestern University, Evanston, IL, 1986.
• Mear, Mark E.:
  The Plastic Yielding of Porous Metals.
  Harvard University, Cambridge, MA, 1986.
• Patoor, Etienne:
  Contribution à l'étude de la plasticité de transformation dans les mono et polycristaux métalliques.
  Université de Metz, France, 1986.
• Persson, Lars-Erik:
  Computing Effective Thermal Conductivities of Composite Materials by the Homogenization Method.
  Luleå Tekniska Universitet, Sweden, 1986.
• Tandon, Gyaneshwar P.:
  Micromechanical Determination of the Elasticity and Plasticity of Composites.
  Rutgers University, New Brunswick, NJ, 1986.
• Whyte, Dennis W.:
  On the Structure and Properties of 3-D Braided Composites.
  Drexel University, Philadelphia, PA, 1986.
• Wilner, Benjamin:
  Stress Analysis of Particles in Metals.
  Harvard University, Cambridge, MA, 1986.
  [Top]

1987

• Ahzi, Said:
  Une approche auto-cohérente pour le comportement des polycristaux viscoplastiques en grandes déformations.
  Université de Metz, France, 1987.
• Cailletaud, Georges:
  Une approche micromécanique phénoménologique du comportement inélastique des métaux.
  Université Pierre et Marie Curie, Paris, France, 1987.
• Gibson, Lorna J.:
  The Elastic and Plastic Behavior of Cellular Materials.
  University of Cambridge, UK, 1987.
• Hori, Muneo:
  Void Collapse and Void Growth in Crystalline Solids.
  UCSD, La Jolla, CA, 1987.
• Kouris, Demitris A.:
  Inhomogeneous Inclusions Subjected to Thermo-Mechanical Loading.
  Northwestern University, Evanston, IL, 1987.
• Pidéri, Cathérine:
  Matériaux composites élastiques: comparaison de quelques méthodes d'homogénéisation.
  Université Pierre et Marie Curie, Paris, France, 1987.
• Wang, Jy-An:
  Modified Direct Method for the Calculation of the Elastic Properties of Composite Materials.
  UCB, Berkeley, CA, 1987.
• Wei, Dan:
  Études micromécaniques de l'endommagement des mousses syntactiques.
  ENSAM Paris, France, 1987.
  [Top]

1988

• Arenburg, Robert T.:
  Analysis of Metal Matrix Composite Structures Using a Micromechanical Constitutive Theory.
  Virginia Polytechnic Institute and State University, Blacksburg, VA, 1988.
• Ault, Holly K.:
  A Micromechanical Model of Fibrous Soft Tissue.
  Worcester Polytechnic Institute, Worcester, MA, 1988.
• Brahim Otsmane, Safia:
  Homogénéisation et thermoélasticité.
  Université Pierre et Marie Curie, Paris, France, 1988.
• Forskitt, Mark:
  A Computer Modelling of Some Mechanical Properties of Perforated and Porous Materials.
  University of Nottingham, UK, 1988.
• Hom, Craig L.:
  Numerical Analysis of the Effects of Void Growth and Crack Tip Opening on Ductile Fracture.
  University of Illinois at Urbana-Champaign, Urbana, IL, 1988.
• Kruch, Serge:
  Comportement global des matériaux composites viscoélastiques.
  Université Pierre et Marie Curie, Paris, France, 1988.
• Li, Zhuang:
  Micromechanical Stresses in Monolithic Ceramics and Ceramic Composite Materials.
  University of Washington, Seattle, WA, 1988.
• Lin, Wei-Wen:
  Two-Dimensional Problems of Elastostatics with Inclusions and Cracks.
  Stanford University, Stanford, CA, 1988.
• Poech, Max-Hermann:
  Verformungs- und Bruchverhalten von Martensit/Austenit Verbundgefügen.
  Montanuniversität Leoben, Austria, 1988.
• Schmauder, Siegfried:
  Die Modellierung zähigkeitsbestimmender Prozesse in in Mikrogefügen mit Hilfe der Finite-Elemente-Methode.
  Universität Stuttgart, Germany, 1988.
• Worswick, Michael J.:
  Cavity Growth and Constitutive Softening in Ductile Solids.
  University of Waterloo, Waterloo, ON, Canada, 1988.
• Zhu, Zhen-Guo:
  Micromechanics of Time-Dependent Deformation of Polycrystalline Metals and Composites.
  Rutgers University, New Brunswick, NJ, 1988.
  [Top]

1989

• Ardiç, Emin S.:
  Stress Fields in Composite Materials by Means of a Non-Classical Approach.
  University of Delaware, Newark, DE, 1989.
• Ben Hamida, Abdelwahed:
  Étude micromécanique des mousses syntactiques.
  Université Pierre et Marie Curie, Paris, France, 1989.
• Blackketter, Donald M.:
  A Study of Woven Fabric-Reinforced Composite Materials Using an Invariant-Based Orthotropic Plasticity Formulation.
  University of Wyoming, Laramie, WY, 1989.
• Bowles, David E.:
  Micromechanics Analysis of Space-Simulated Thermal Deformations and Stresses in Continuous Fiber-Reinforced Composites.
  Virginia Polytechnic Institute and State University, Blacksburg, VA, 1989.
• Chackachery, Elizabeth A.:
  Deformation Micromechanisms in Polymeric Matrices and Carbon Fibre-Reinforced Composites.
  Texas A&M University, College Station, TX, 1989.
• Chang, Julius C.A.:
  Elastic Energy Changes Accompanying Gamma-Prime Rafting in Nickel-Base Superalloys.
  MIT, Cambridge, MA, 1989.
• Christman, Thomas A.:
  Microstructural Evolution and Micromechanical Modelling of the Mechanical Behavior of a Ceramic Particle-Reinforced Metal-Matrix Composite.
  Brown University, Providence, RI, 1989.
• Corvasce, Filomeno:
  Prévision du comportement thermomécanique des composites a matrice métallique.
  Université de Metz, France, 1989.
• Ferrari, Mauro:
  Effective Elastic Properties of Textured Materials.
  UCB, Berkeley, CA, 1989.
• Gotsis, Pascalis K.:
  Elasto-Plastic Analysis of Unidirectional Fiber-Reinforced Composites Subjected to Transverse Normal Loading Using the Finite Element Method.
  UCLA, Los Angeles, CA, 1989.
• King, Todd R.:
  Characterization and Enhancement of the Fiber-Matrix Bond in Pitch-Based Carbon Fiber/Epoxy Matrix Composites.
  University of Wyoming, Laramie, WY, 1989.
• Roelfstra, Pieter E.:
  A Numerical Approach to Investigate the Properties of Concrete: Numerical Concrete.
  EPFL, Lausanne, Switzerland, 1989.
• Shimansky, Richard A.:
  Effect of Interfaces on Continuous Fiber Reinforced Brittle Matrix Composites.
  Pennsylvania State University, University Park, PA, 1989.
• Taggart, David G.:
  Processing Induced Stresses and Their Influence on Plastic Deformation in Composite Materials.
  University of Pennsylvania, Philadelphia, PA, 1989.
• Taliercio, Alberto:
  Studio del comportamento elastico e a rottura dei materiali compositi a fibre e di elementi strutturali in composito.
  Politecnico di Milano, Italy, 1988.
• Toledano, Alberto:
  High-Order Mixture Homogenization of Periodic Nonlinear Composites.
  UCSD, La Jolla, CA, 1989.
• Tsotsis, Thomas K.:
  Effects of Moisture on Composite Materials.
  Texas A&M University, College Station, TX, 1989.
• Withers, Philip J.:
  The Development of the Eshelby Model and its Application to Metal Matrix Composites.
  University of Cambridge, UK, 1989.
• Wu, San-Jarn:
  The Influence of Anisotropy of the Microstructure on the Overall Elastic-Plastic Response of Fibrous Metal-Matrix Composites.
  University of Illinois at Urbana-Champaign, Urbana, IL, 1989.
• Wu, Xiao-Qiang:
  Development of the General Theories and Discrete Models of Polycrystalline Plasticity.
  UCLA, Los Angeles, CA, 1989.
• Zhang, J.:
  Mechanics of Cellular Materials.
  University of Cambridge, UK, 1989.
• Zhu, Han:
  Effect of Interfacial Zone on Mechanical Behavior and Failure of Fiber-Reinforced Composites.
  Northwestern University, Evanston, IL, 1989.
  [Top]

1990

• Ahaouari, Kanima:
  Contribution à la modélisation de la thermo-élasticité et de l'acousto-élasticité des matériaux microhétérogènes.
  Université de Metz, France, 1990.
• Bréban, Philippe:
  Composites aluminium-fibres de carbone obtenus par filage.
  Ecole Centrale de Paris, France, 1990.
• Brinson, L. Catherine:
  Time-Temperature Response of Multi-Phase Viscoelastic Solids Through Numerical Analysis.
  California Institute of Technology, Pasadena, CA, 1990.
• Courage, Wim M.G.:
  Constitutive Models for Composites Based on Numerical Micro-Mechanics.
  TU Eindhoven, The Netherlands, 1990.
• Dumontet, Hélène:
  Homogénéisation et effets de bord dans les matériaux composites.
  Mémoire HDR, Université Pierre et Marie Curie, Paris, France, 1990.
• Guedes, José M.:
  Nonlinear Computational Models for Composite Materials Using Homogenization.
  University of Michigan, Ann Arbor, MI, 1990.
• Hall, Richard:
  Matrix-Dominated Thermoviscoplasticity in Fibrous Metal-Matrix Composite Materials.
  Rensselaer Polytechnic Institute, Troy, NY, 1990.
• Hänsch, Wilfried:
  Gefüge und Bruchzähigkeit ledeburitischer Chromstähle - Messung und Finite-Elemente-Nachbildung.
  Ruhr-Universität Bochum, Germany, 1990.
• Honein, Tony V.:
  On Heterogenization in Elasticity.
  Stanford University, Stanford, CA, 1990.
• Impelluso, Thomas J.:
  A Finite Element Implementation of a High-Order Homogenization Theory.
  UCSD, La Jolla, CA, 1990.
• Kaiser, Donna J.:
  Finite Element Analysis of a Composite Containing a Cubic Array of Spheres.
  MIT, Cambridge, MA, 1990.
• Leung, Christopher K.Y.:
  Micromechanical Modelling of Short-Fiber Reinforced Ceramics.
  MIT, Cambridge, MA, 1990.
• Liao, David:
  Elastic Behavior of 3-D Braided Composites Under Compressive Loading.
  Drexel University, Philadelphia, PA, 1990.
• Lulay, Kenneth E.:
  The Effects of Cooling on the Flow Strength of Metal Matrix Composites.
  University of Washington, Seattle, WA, 1990.
• Pilvin, Philippe:
  Approches multiéchelles pur la prévision du comportement anélastique des métaux.
  Université Pierre et Marie Curie, Paris, France, 1990.
• Poladian, Leon:
  Effective Transport and Optical Properties of Composite Materials.
  University of Sidney, Australia, 1990.
• Sabar, Hafid:
  Problème d'inclusion à frontiére mobile et applications.
  Université de Metz, France, 1990.
• Spiegler, Roland:
  Untersuchungen zum Bruchmechanismus in Teilchenverbundwerkstoffen.
  Universität Stuttgart, Germany, 1990.
• Stankowski, Thomas:
  Numerical Simulation of Progressive Failure in Particle Composites.
  University of Colorado at Boulder, CO, 1990.
• Svobodnik, Alfred J.:
  Numerical Treatment of the Elastic-Plastic Macromechanical Behavior of Longfiber-Reinforced Metal Matrix Composites.
  TU Wien, Vienna, Austria, 1990.
• Yeh, Nanming:
  Thermoviscoplastic Analysis of Metal Matrix Composites.
  Rensselaer Polytechnic Institute, Troy, NY, 1990.
• Zhang, Hongyan:
  Numerical and Analytical Predictions of Thermo-Mechanical Behavior of Metal Matrix Composites.
  Ohio State University, Columbus, OH, 1990.
  [Top]

1991

• Adley, Mark D.:
  Computation of the Effective Properties of Materials with Microstructure.
  University of Rhode Island, Kingston, RI, 1991.
• Allais, Lucien:
  Effet de la morphologie et de la répartition spatiale des phases sur le comportement mécanique des matériaux biphasés.
  Université de Paris XIII, Villetaneuse, France, 1991.
• Aoubiza, Boujemàa:
  Homogénéisation d'un composite multi-échelle. Application à une modélisation numérique de l'os haversien compact.
  Université de Franche-Comté, Besançon, France, 1991.
• Bakuckas, John G.:
  Damage Progression During Static and Fatigue Loading in Metal Matrix Composites.
  Drexel University, Philadelphia, PA, 1991.
• Böhm, Helmut J.:
  Computer Based Micromechanical Investigations of the Thermomechanical Behavior of Metal Matrix Composites.
  TU Wien, Vienna, Austria, 1991.
• Carman, Gregory P.:
  Micromechanics of Finite Length Fibers in Composite Materials.
  Virginia Polytechnic Institute and State University, Blacksburg, VA, 1991.
• Chen, Tungyang:
  Selected Problems in Micromechanics of Fibrous Composites.
  Rensselaer Polytechnic Institute, Troy, NY, 1991.
• Dragone, Thomas L.:
  An Experimental and Numerical Investigation of the High-Temperature Creep Properties of Fiber Reinforced Metal Matrix Composites.
  Stanford University, Stanford, CA, 1991.
• Eduljee, Rushad F.:
  The Effect of Microstructure on Residual Stress Development in Short Fiber Composites.
  University of Delaware, Newark, DE, 1991.
• Helsing, Johan:
  Models for Conduction and Estimates of Conductivity in Composite Materials.
  KTH, Stockholm, Sweden, 1991.
• Hollister, Scott J.:
  Homogenization Analysis of Trabecular Bone and Prediction of Bone Ingrowth using Topology Optimization.
  University of Michigan, Ann Arbor, MI, 1991.
• Huang, Yonggang Young:
  Cavitation and Localization in Plastic Flow.
  Harvard University, Cambridge, MA, 1991.
• Jeulin, Dominique:
  Modèles morphologiques de structures aléatoires et de changement d'échelles.
  Université de Caen, France, 1991.
• Lee, Bing J.:
  The Effect of Inhomogeneity Shape on the Overall Response of Linear and Non-Linear Two-Phase Materials.
  University of Texas, Austin, TX, 1991.
• Maghous, Samir:
  Détermination du critère de résistance macroscopique d'un matériau hétérogène à structure périodique: Approche numérique.
  ENPC Paris, France, 1991.
• Patton, Edward M.:
  Crack Path Prediction Near an Elliptical Inhomogeneity.
  University of Delaware, Newark, DE, 1991.
• Qiu, Yanping:
  Theory of Inclusions in the Elastic and Elastic-Plastic Deformation of Composite Materials.
  Rutgers University, New Brunswick, NJ, 1991.
• Shah, Rahul S.:
  Modeling and Analysis of High-Temperature Inelastic Deformation in Metal Matrix Composites.
  Rensselaer Polytechnic Institute, Troy, NY, 1991.
• Shyong, Wen-Jong:
  Homogenization and Symmetry in Perforated Elastic Media.
  University of Maryland Baltimore County, Baltimore, MD, 1991.
• Slaughter, William S.:
  Load-Transfer and Crack Bridging in Fiber-Toughened Ceramic Composites.
  Harvard University, Cambridge, MA, 1991.
• Snyder, Brian D.:
  Anisotropic Structure-Property Relations for Trabecular Bone: An Analysis of the Morphological and Constitutive Properties of Trabecular Bone from the Human Proximal Femur and Lumbal Spine.
  University of Pennsylvania, Philadelphia, PA, 1991.
• Wang, Yiming:
  Micromechanics of Creep Deformation of Two-Phase Composites and Porous Materials.
  Rutgers University, New Brunswick, NJ, 1991.
• Wu, Jer-Fang:
  Numerical Techniques for Elastic-Plastic Analysis of Fibrous Metal Matrix Composites.
  Rensselaer Polytechnic Institute, Troy, NY, 1991.
• Yang, Chung-Chia:
  Micromechanics of Fiber-Reinforced Brittle-Matrix Composite Materials.
  Northwestern University, Evanston, IL, 1991.
  [Top]

1992

• Agarwal, Rakesh K.:
  Constitutive Modeling of Woven Fabric Composites for Concurrent Design.
  University of Maryland, College Park, MD, 1992.
• Andreasen, Jens H.:
  Micromechanics and Transformation Toughening of Ceramics.
  Aalborg Universitet, Denmark, 1992.
• Anlas, Gunay:
  Fracture of an Elliptical Inclusion and its Implications for the Properties of Short Fiber Composites.
  University of Delaware, Newark, DE, 1992.
• Brockmüller, Michael:
  Zur Vorhersage des Spannungs-Dehnungs-Verhaltens kurzfaserverstärkter Verbundwerkstoffe mittels der Methode der Finiten Elemente.
  TU Kaiserslautern, Germany, 1992.
• Cheng, Chao-Hsien:
  Modeling of the Elastoplastic Behavior for Composite Materials Using the Homogenization Method.
  University of Michigan, Ann Arbor, MI, 1992.
• Chung, Ilsup:
  Inelastic Behavior of Thermoplastic Composites.
  Purdue University, West Lafayette, IN, 1992.
• Dendievel, Rémy:
  Méthodes variationelles et approximation autocohérentes en élasticité et viscoplasticité.
  INP Grenoble, France, 1992.
• Donovan, Richard P.:
  A Mixture Theory Approach to Composite Structural Analysis.
  University of Wyoming, Laramie, WY, 1992.
• Dunn, Martin L.:
  Thermal, Mechanical and Electroelastic Behavior of Composite Materials.
  University of Washington, Seattle, WA, 1992.
• Fond, Christophe:
  Interactions entre fissures et cavités circulaires dans des milieux élastiques plans.
  Université Pierre et Marie Curie, Paris, France, 1992.
• Ganghoffer, Jean François:
  Modélisation micromécanique et calcul par éléments finis du comportement de matériaux en cours de transformations de phases: Cas des transformations perlitique et martensitique d'alliages ferreux.
  INP de Lorraine, Nancy, France, 1992.
• Gowayed, Yasser A.:
  An Integrated Approach to the Geometric and Mechanical Modelling of Textile Structural Composites.
  North Carolina State University, Raleigh, NC, 1992.
• Gunawardena, Shobha R.:
  Constitutive Equations for Weakly Bonded Metal Matrix Composites.
  UCSB, Santa Barbara, CA, 1992.
• Hamann, Ronald:
  Étude éxperimentale et théorique des proprietés élastiques et microplastiques des composites à matrice métallique à renfort sous forme de particules.
  INSA Lyon, France, 1992.
• Honein, Elie Victor:
  Multiple Inclusions in Elastostatics.
  Stanford University, Stanford, CA, 1992.
• Hsu, Su-Yen:
  Finite Element Micromechanics Modeling of Inelastic Deformation of Unidirectionally Fiber-Reinforced Composites.
  Virginia Polytechnic Institute and State University, Blacksburg, VA, 1992.
• Huang, Jin-Huang:
  Sliding Inclusion and Inhomogeneity Problems.
  Northwestern University, Evanston, IL, 1992.
• Kim, Hong Gun:
  Micromechanics of Deformation in Short Fiber or Whisker Reinforced Metal Matrix Composites.
  University of Massachusetts, Amherst, MA, 1992.
• Kouider, Mohamed W.:
  The Effect of Sliding Interfaces and Inhomogeneous Interphases on Thermal and Elastic Properties of Composites.
  Michigan State University, East Lansing, MI, 1992.
• Kumar, Susmit:
  Computer Simulation of Three-Dimensional Material Microstructure and its Application in the Determination of Mechanical Behavior of Polycrystalline Materials and Engineering Structures.
  Pennsylvania State University, University Park, PA, 1992.
• Lee, Sang Soon:
  Three-Dimensional Boundary Element Analysis of Residual Stresses in a Cross-Ply Fiber Composite Model.
  UCLA, Los Angeles. LA, 1992.
• Li, Dong Sheng:
  Micromechanical Modelling of Continuous Fibre Unidirectional Metal Matrix Composites.
  University of Bristol, UK, 1992.
• Liu, Jianhui:
  A Three-Dimensional Model for the Residual Stresses in a Unidirectional Composite Plate.
  University of Utah, Salt Lake City, UT, 1992.
• McHugh, Peter E.M.:
  Computational Modeling of Metal Matrix Composite Materials.
  Brown University, Providence, RI, 1992.
• Pan, Huang-Hsing:
  A Class of Inclusion Problems for the Strengthening of Brittle and Ductile Composites.
  Rutgers University, New Brunswick, NJ, 1992.
• Perrin, Gilles:
  Contribution à l'étude théorique et numérique de la rupture ductile des métaux.
  Ecole Polytechnique, Palaiseau, France, 1992.
• Rahman, Shahzad:
  Micromechanics-Based Analysis of Fiber Reinforced Laminated Composites.
  University of Illinois at Urbana-Champaign, Urbana, IL, 1992.
• Rao, Shyam S.:
  Interfacial Microstress Distributions in Ceramic Heterostructures.
  Rutgers University, New Brunswick, NJ, 1992.
• Schellekens, Johannes C.J.:
  Computational Strategies for Composite Structures.
  TU Delft, The Netherlands, 1992.
• Shi, Ning:
  Thermo-Mechanical Behavior of Silicon Carbide/Aluminum Discontinuously Reinforced Composites.
  University of Maryland, College Park, MD, 1992.
• Shi, Shixiang:
  Micromechanical Constitutive Modeling of Viscoplastic Deformation of Polycrystals.
  University of Connecticut, Storrs, CT, 1992.
• Simbeya, Kazomba W.:
  Ligament Structure and Function: A Nonlinear Finite Element Approach.
  University of Calgary, Calgary, AB, Canada, 1992.
• Sørensen, Bent F.:
  Damage Mechanisms in Ceramic Matrix Fiber Composites.
  DTU, Lyngby, Denmark, 1992.
• Varna, Janis:
  Analysis of Transverse Composite Cross-Ply Laminates.
  Luleå Tekniska Universitet, Sweden, 1992.
• Viéville, Pascal:
  Influence des paramètres architecturaux sur les caractéristiques viscoélastiques du bois à ses différentes échelles d'hétérogénéité.
  INP de Lorraine, Nancy, France, 1992.
• Wang, Yungchen:
  Interface Fracture in Composite Materials.
  Cornell University, Ithaca, NY, 1992.
• Xu, Junde:
  Modeling Powder Consolidation and the Formation of Composite Materials.
  UCSB, Santa Barbara, CA, 1992.
• Yu, Niann-I:
  Overall Properties of Composite Materials: A General Model Based on Periodic Microstructure.
  UCSD, La Jolla, CA, 1992.
  [Top]

1993

• Blanas, Panagiotis:
  Numerical Modeling and Prediction of the Thermomechanical Behavior of Fiber-Reinforced Composites.
  University of Lowell, Lowell, MA, 1993.
• Chambard, Thierry:
  Contribution à l'homogénéisation en plasticité pour une distribution aléatoire des hétérogénéités.
  Université Joseph Fourier, Grenoble, France, 1993.
• Chang, Whie:
  Modeling and Numerical Analysis of Composite Manufacturing Process.
  University of Michigan, Ann Arbor, MI, 1993.
• Chen, Tsung-Muh:
  Micromechanics and Effective Properties of Particulate Composites and Fluid Suspensions.
  Princeton University, Princeton, NJ, 1993.
• Choi, Deok-Kee:
  A Study of Micromechanics of Two-Dimensional Inclusion Problems Using Numerical Green's Functions.
  University of Texas, Arlington, TX, 1993.
• Choi, Jae Bong:
  Mechanical Properties of Conventional and Re-Entrant Foam Materials.
  University of Iowa, Iowa City, IA, 1993.
• Corbin, Stephen F.:
  Low Strain Behaviour of a Particulate Reinforced Aluminum Alloy.
  McMaster University, Hamilton, ON, Canada, 1993.
• Cruz, Manuel E.C.:
  A Parallel Monte-Carlo Partial-Differential-Equation Procedure for the Analysis of Multicomponent Random Media.
  MIT, Cambridge, MA, 1993.
• Cui, Yingqing L.:
  Mechanics of Toughening, Strengthening and Splitting of Ceramic Composites.
  Harvard University, Cambridge, MA, 1993.
• Daves, Werner:
  Mikro- und makromechanische Simulation des Deformationsverhaltens von Stählen unter Berücksichtigung von Umwandlungs- und Diffusionsvorgängen.
  Montanuniversität Leoben, Austria, 1993.
• deBotton, Gal:
  The Constitutive Behavior of Nonlinear Anisotropic Composites.
  University of Pennsylvania, Philadelphia, PA, 1993.
• Dietrich, Christian:
  Mechanisches Verhalten von Zweiphasengefügen: Numerische und experimentelle Untersuchungen zum Einfluß der Gefügegeometrie.
  Universität Stuttgart, Germany, 1993.
• Eggleston, Michael R.:
  Testing, Modeling and Analysis of Transverse Creep in SCS-6/Ti-6Al-4V Metal Matrix Composites at 482°C.
  Rensselaer Polytechnic Institute, Troy, NY, 1993.
• El Mayas, Nathalie:
  Modélisation microscopique et macroscopique du comportement d'un composite à matrice métallique.
  ENPC Paris, France, 1993.
• Fan, Zhongyun:
  Microstructure and Mechanical Properties of Multiphase Materials.
  University of Surrey, Guildford, UK, 1993.
• Gosz, Michael R.:
  On the Constitutive Response of Transversely Loaded Fiber Composites with Compliant Interfaces.
  Northwestern University, Evanston, IL, 1993.
• Goulet, Robert W.:
  The Quantification of the Structure and Mechanical Properties of Trabecular Bone.
  University of Michigan, Ann Arbor, MI, 1993.
• Grandsire-Vinçon, Isabelle:
  Compression des composites unidirectionels: Méthodes d'essais et approche micromécanique.
  ENS Cachan, France, 1993.
• Guo, Xiang-Dong E.:
  Fatigue of Trabecular Bone.
  Harvard University, Cambridge, MA, 1993.
• Hu, Kai Xiong:
  Stress and Fracture Analysis for Systems with Inhomogeneities.
  University of Arizona, Tucson, AZ, 1993.
• Jeong, Gyusang:
  Residual Stress Development due to Cool Down in Viscoplastic Metal Matrix Composites.
  Texas A&M University, College Station, TX, 1993.
• Kreuzberger, Stefan:
  Zum Grenzwertkonzept für mechanische und thermomechanische Eigenschaften mehrphasiger Werkstoffe.
  RWTH Aachen, Germany, 1993.
• Laird, George:
  Micromechanics of Heterogeneous Materials under Compressive Loading.
  Oregon State University, Corvallis, OR, 1993.
• Lee, Ven-Gen:
  On the Mechanics of Stress Analysis of Fiber-Reinforced Composites.
  Northwestern University, Evanston, IL, 1993.
• Li, Shuh-Huei:
  Fracture Mechanics and Micromechanisms in Fiber-Reinforced Composites.
  Northwestern University, Evanston, IL, 1993.
• Lin, Shyh-Chyang:
  The Equivalent Inclusion Method in Elasticity and Composite Materials.
  Northwestern University, Evanston, IL, 1993.
• Lipinski, Paul:
  Modélisation du comportement des métaux, en transformations élasto-plastiques finies, à partir d'une méthode de transition d'échelles.
  Mémoire HDR, Université de Metz, France, 1993.
• Lissenden, Cliff J.:
  Inelastic Deformation of Metal Matrix Composites.
  University of Virginia, Charlottesville, VA, 1993.
• Moussa, Metallwy M.:
  Prediction of the Behavior of Short-Fiber Metal Matrix Composites Using Three-Dimensional Finite Element Analysis.
  Illinois Institute of Technology, Chicago, IL, 1993.
• Murali, Krishna M.:
  Unified Constitutive Modeling of Creep and Plasticity of Metals and Metal Matrix Composites.
  Rutgers University, New Brunswick, NJ, 1993.
• Pochiraju, Kishore V.:
  Mechanics of the Single Fiber Pullout Problem with Several Interface Conditions.
  Drexel University, Philadelphia, PA, 1993.
• Poole, Warren J.:
  The Deformation of Copper-Tungsten Composites.
  McMaster University, Hamilton, ON, Canada, 1993.
• Robertson, David D.:
  A Non-Linear Three-Dimensional Model for Fiber-Reinforced Laminated Composites.
  Air Force Institute of Technology, Dayton, OH, 1993.
• Schlangen, Erik:
  Experimental and Numerical Analysis of Fracture Processes in Concrete.
  TU Delft, The Netherlands, 1993.
• Sevostianov, Igor:
  Effective Mechanical Properties of Matrix Composites Containing Inelastic Inclusions.
  St. Petersburg State University, Russia, 1993.
• Sørensen, Niels J.:
  Modellering af Krybning i Metalmatrix Kompositter.
  DTU, Lyngby, Denmark, 1993.
• Thébaud, Frédéric:
  Vers l'introduction de l'endommagement dans la prévision globale du comportement de composites à matrice métallique.
  Ecole Polytechnique, Palaiseau, France, 1993.
• Tsai, Wen-Bin:
  Inclusion Models of Tensile Fracture in Fiber-Reinforced Brittle-Matrix Composites.
  Northwestern University, Evanston, IL, 1993.
• Veazie, David R.:
  Modeling of Fiber Reinforced Composites Incorporating Distinct Interface Properties.
  Georgia Institute of Technology, Atlanta, GA, 1993.
• Yang, Ruey-Bin:
  Multiple Scattering of Elastic Waves in Composite Materials.
  UCLA, Los Angeles, CA, 1993.
• Zahl, Derek B.:
  3-Dimensional Strengthening of Metal Matrix Composites Reinforced with Short Fibers.
  UCSB, Santa Barbara, CA, 1993.
• Zuiker, Joseph R.:
  Elastic and Inelastic Micromechanical Analysis of Functionally Graded Materials and Laminated Structures Using Transformation Fields.
  Rensselaer Polytechnic Institute, Troy, NY, 1993.
  [Top]

1994

• Abdul-Latif, Akrum:
  Approches multiéchelles pour la description de l' anélasticité avec endommagement.
  Université de Technologie de Compiègne, France, 1994.
• Alzebdeh, Khalid Ibrahim:
  Computational Methods in Stochastic Micromechanics of Heterogeneous Solids.
  Michigan State University, East Lansing, MI, 1994.
• Amieur, Mohamed:
  Etude numérique et expérimentale des effets d'échelle et de conditions aux limites sur des éprouvettes de béton n'ayant pas le volume représentatif.
  EPFL, Lausanne, Switzerland, 1994.
• Bardenhagen, Scott G.:
  Higher-Order Gradient Continuum Models for Nonlinear Solids with Periodic Microstructure and Their Application to Failure by Localized Deformation.
  University of Michigan, Ann Arbor, MI, 1994.
• Bhattacharyya, Abhjit:
  Plasticity and Stress-Induced Phase Transformation in Dual-Phase Systems.
  Rutgers University, New Brunswick, NJ, 1994.
• Boccaccini, Aldo R.:
  Zur Abhängigkeit der mechanischen Eigenschaften zweiphasiger und poröser Werkstoffe von der Gefüge- bzw. Porositätsstruktur.
  RWTH Aachen, Germany, 1994.
• Böhm, Helmut J.:
  Einheitszellenanalysen für unidirektional langfaserverstärkte Metallmatrix-Verbundwerkstoffe.
  Habilitationsschrift, TU Wien, Vienna, Austria, 1994.
• Bourgeois, Nadine:
  Charactérisation et modélisation microméchanique du comportement et de l'endommagement d'un composite à matrice métallique: Al/SiCp.
  ENSAM Paris, France, 1994.
• Brayshaw, James B.:
  Consistent Formulation of the Method of Cells Micromechanics for Transversely Isotropic Metal Matrix Composites.
  University of Virginia, Charlottesville, VA, 1994.
• Broeckmann, Christoph:
  Bruch karbidreicher Stähle - Experiment und FEM-Simulation unter Berücksichtigung des Gefüges.
  Ruhr-Universität Bochum, Germany, 1994.
• Chang, Yang:
  Statistical Micromechanics for Effective Properties of Random Materials.
  University of Massachusetts, Amherst, MA, 1994.
• Chen, Jidong:
  Elastic and Structural Properties of Composite Materials.
  Michigan State University, East Lansing, MI, 1994.
• Cherkaoui, Mohammed:
  Comportement thermoélastique global des composites à renforts enrobés - Modélisation micromécanique et applications.
  Université de Metz, France, 1994.
• Chun, Heong Jae:
  Thermomechanical Behavior of Unidirectional Metal Matrix Composite.
  Northwestern University, Evanston, IL, 1994.
• El Mouden, Mustapha:
  Une nouvelle méthode d'homogénéisation des matériaux composites élastiques.
  Université de Metz, France, 1994.
• Fennan, Abdelhadi:
  Homogénéisation élastoplastique discrète.
  Ecole Centrale de Lyon, France, 1994.
• Gu, Pei:
  Some Mechanics Problems of Composites.
  Brown University, Providence, RI, 1994.
• Guidoum, Amor:
  Simulation numérique 3D des comportements des bétons en tant que composites granulaires.
  EPFL, Lausanne, Switzerland, 1994.
• Guillaumat, Laurent:
  Multifissuration des CMC: Relation avec la microstructure et le comportement mécanique.
  Université de Bordeaux, France, 1994.
• Haubensak, Frederick G.:
  Microstructure Design of Porous Brittle Materials.
  MIT, Cambridge, MA, 1994.
• Ho, Seungwoo:
  Thermal Residual Stresses in Cast Silicon Carbide/Aluminum Metal Matrix Composites and its Effects on Mechanical Behavior.
  Tufts University, Medford, MA, 1994.
• Klett, James W.:
  Heat Transfer in Carbon-Carbon Composites.
  Clemson University, Clemson, SC, 1994.
• Kouddane, R.:
  Approche autocohérente en élastoviscoplasticité des matériaux hétérogènes.
  Université de Metz, France, 1994.
• Krishnaswami, Sriram:
  Development of an Anisotropic Yield Function for Porous Materials.
  Ohio State University, Columbus, OH, 1994.
• Kwon, Patrick Y.:
  Macroscopic Design and Fabrication of Functionally Gradient Materials.
  UCB, Berkeley, CA, 1994.
• Lease, Kevin Blair:
  Deformation and Fatigue of a Particulate Reinforced Metal Matrix Composite.
  University of Iowa, Iowa City, IA, 1994.
• Luo, Jie:
  Micromechanics of Composites and MgO/SiC Composites.
  University of Leeds, UK, 1994.
• Marketz, Franz:
  Computational Micromechanics Studies on Martensitic Transformation.
  Montanuniversität Leoben, Austria, 1994.
• Massardier, Véronique:
  Elaboration et caractérisation microstructurale et mécanique de composites à matrice aluminium renforcée par des plaquettes monocristallines d'alumine alpha.
  INSA Lyon, France, 1994.
• Matsuzaki, Yuji:
  Thermomechanical Behavior of Functionally Gradient Material for Scramjet Heat Insulation Structures.
  University of Kyōto, Japan, 1994.
• Meraghni, Fodil:
  Identification expérimentale des mécanismes d'endommagement contribuant à la modélisation micromécanique du comportement des composites à fibres discontinues orientées aléatoirement.
  Université de Technologie de Compiégne, France, 1994.
• Müller, Ralf:
  3D Assessment and Analysis of Trabecular Architecture.
  ETH Zürich, Zurich, Switzerland, 1994.
• Noe, Alfons:
  Zur dynamischen Ausbreitung gerader und gekrümmter Grenzflächenrisse in thermomechanisch belasteten Bimaterialien - Ein Beitrag zur Grenzflächenmechanik.
  Universität-GH Paderborn, Germany, 1994.
• Orso, Joseph:
  Micromechanics/Macromechanics of Composites with Shrinkage Controlled Matrices.
  University of Maryland, College Park, MD, 1994.
• Pantonin, Tina L.:
  The Relationship Between Constraint and Ductile Fracture Initiation as Defined by Micromechanical Analyses.
  Stanford University, Stanford, CA, 1994.
• Pyzalla-Schieck, Anke R.:
  Thermische Mikroeigenspannungen in Stückverbunden.
  Ruhr-Universität Bochum, Germany, 1994.
• Rougier, Yves:
  Etude du comportement sous irradiation: Modélisation micromécanique de l'élastoviscoplasticité.
  Ecole Polytechnique, Palaiseau, France, 1994.
• Salzar, Robert S.:
  Optimization of Layered Metal Matrix Composite Cylinders.
  University of Virginia, Charlottesville, VA, 1994.
• Sautter, Martin:
  Modellierung des Verformungsverhaltens mehrphasiger Werkstoffe mit der Methode der Finiten Elemente.
  Universität Stuttgart, Germany, 1994.
• Sharma, Vinod:
  Damage Evolution in Hot-Pressed Silicon Nitride under Repeated Dynamic and Quasi-Static Compression Loading.
  UCSD, La Jolla, CA, 1994.
• Shen, Yu-Lin:
  Micromechanical Modelling of Deformation in Metal-Ceramic Composites.
  Brown University, Providence, RI, 1994.
• Siegmund, Thomas:
  Micromechanical Modeling of Two Phase Alloys with Special Emphasis on Duplex Stainless Steels.
  Montanuniversität Leoben, Austria, 1994.
• Sigmund, Ole:
  Design of Material Structures Using Topology Optimization.
  DTU, Lyngby, Denmark, 1994.
• Simonsson, K.:
  Micromechanical FE-Simulations of the Plastic Behavior of Steels Undergoing Martensitic Transformation.
  Linköpings Universitet, Sweden, 1994.
• Stam, Geert G.:
  A Micromechanical Approach to Transformation Toughening in Ceramics.
  TU Delft, The Netherlands, 1994.
• Tseng, Kuang-Hui:
  Effective Elastic and Elastoplastic Behavior of Composite Materials with Randomly Dispersed Interacting Microcracks and Inhomogeneities: Statistical Micromechanical Formulation and Computational Aspects.
  Princeton University, Princeton, NJ, 1994.
• Vosbeek, Petrus H.J.:
  A Micromechanical Approach to Deformation and Failure of Discrete Media.
  TU Eindhoven, The Netherlands, 1994.
• Weißenbek, Emmerich:
  Finite Element Modelling of Discontinuously Reinforced Metal Matrix Composites.
  TU Wien, Vienna, Austria, 1994.
• Xia, Zhiyong C.:
  Micromechanics of Fiber-Reinforced Ceramic Composites.
  Harvard University, Cambridge, MA, 1994.
• Xu, Liang:
  The Deformation and Fracture of Co-Continuous Alumina-Aluminum Composites under Monotonic and Cyclic Loading.
  Ohio State University, Columbus, OH, 1994.
• Yan, Y.:
  Finite Element Analysis and Characteristics of Fibre and Fabric Reinforced Composites.
  University of Ulster, Belfast, UK, 1994.
• Zaidman, Matityahu:
  Constitutive Models for Composite Materials with Evolving Microstructures.
  University of Pennsylvania, Philadelphia, PA, 1994.
  [Top]

1995

• Alghamdi, Abdulmalik A.:
  Response of Adaptive Structures with Multiple Embedded Devices using Eigenstrain Techniques.
  University of Maryland, College Park, MD, 1995.
• Ananthanarayanan, C.R.:
  Micromechanics Based Modeling of Metal Matrix Composites Using Finite Element Method.
  Florida State University, Tallahassee, FL, 1995.
• Axelsen, Michael S.:
  Quantitative Description of the Morphology and Microdamages of Composite Materials.
  Aalborg Universitet, Denmark, 1995.
• Brambrink, R.:
  Verifikation eines Modells zur Bestimmung anisotroper thermischer Materialeigenschaften von endlosfaserverstärkten Thermoplasten mit Hilfe der Finiten-Elemente Methode.
  RWTH Aachen, Germany, 1995.
• Burr, Alain:
  Micromécanique et comportement de matériaux hétérogènes.
  Université Pierre et Marie Curie, Paris, France, 1995.
• Chouchaoui, Cherif-Saadane:
  Modélisation du comportement de matériaux composites à renforts tissés et à matrice organique.
  Université de Technologie de Compiègne, France, 1995.
• de Kok, Johannes M.M.:
  Deformation, Yield and Fracture of Unidirectional Composites in Transverse Loading.
  TU Eindhoven, The Netherlands, 1995.
• Feng, Xiqiao:
  Micro-Failure Theory for Brittle Materials and Shakedown Analysis of Structures with Damage.
  Tsinghua University, Beijing, P.R. China, 1995.
• Fitoussi, Joseph:
  Etude micromécanique de l'influence de l'endommagement a l'interface fibre/matrice sur le comportement de composites organiques à renforts discontinus.
  ENSAM Paris, Paris, France, 1995.
• Garajeu, Mihiel:
  Contribution à l'étude du comportement non linéaire de milieux poreux avec ou sans renfort.
  Université de la Méditerraneé, Marseille, France, 1995.
• Geng, Yiping:
  Micromechanics-Based Design of FRC Materials from Microstructural Features to Structural Behavior.
  MIT, Cambridge, MA, 1995.
• Ghaddar, Chahid K.:
  Parallel Analytico-Computational Methods for Multicomponent Media: Application to Thermal Composites and Porous-Media Flows.
  MIT, Cambridge, MA, 1995.
• Gu, Xiaohong:
  Micromechanics of Model Carbon Fibre/Epoxy Resin Composites.
  UMIST, Manchester, UK, 1995.
• Heguri, Hisashi:
  Modeling and Numerical Analysis of Geometrically Nonlinear Composites with Incompressibility Constraint.
  University of Michigan, Ann Arbor, MI, 1995.
• Helte, Andreas:
  Bounds and Approximations for Effective Properties of Composite Materials.
  KTH, Stockholm, Sweden, 1995.
• Ito, Kamoto:
  Effects of Yarn Undulation on the Stress and Deformation of Textile Composites.
  University of Delaware, Newark, DE, 1995.
• Lacroix, Thierry:
  Micromechanical Modeling of the Fiber-Matrix Interface in Polymer Matrix Composites.
  Katholieke Universiteit Leuven, Belgium, 1995.
• Lay, Béatrice:
  Prévision du comportement et de l'endommagement des composites à matrice métallique par éléments finis.
  INSA Lyon, France, 1995.
• Le Coënt, Anthony:
  Observations microstructurales et modélisation statistique des matériaux composites àgrégats.
  ENSMP, Evry, France, 1995.
• Lemoine, Xavier:
  Analyse micromécanique de la formation des cellules de dislocations et conséquences sur le comportement des aciers.
  Université de Metz, France, 1995.
• Li, Jie:
  Viscoelasticity and Viscoplasticity of a Class of Composites.
  Rutgers University, New Brunswick, NJ, 1995.
• Li, Li:
  Micromechanics of Piezocomposites.
  University of Illinois at Urbana-Champaign, Urbana, IL, 1995.
• Lin, Zhong:
  Micromechanics Studies on Deformation and Failure in Advanced Composite Materials.
  Johns Hopkins University, Baltimore, MD, 1995.
• Lippmann, Nils:
  Beitrag zur Untersuchung des Bruchverhaltens von Werkzeugen aus Schnellarbeitsstählen unter statischer Beanspruchung.
  TU Bergakademie Freiberg, Germany, 1995.
• Lu, Tian Jian:
  Thermomechanical Problems of Ceramic Matrix Composites.
  Harvard University, Cambridge, MA, 1995.
• Lutz, Melanie P.:
  Elastic and Thermoelastic Behavior of Materials with Continuously Varying Elastic Moduli.
  UCB, Berkeley, CA, 1995.
• Maire, Eric:
  Relations entre les propriétés mécaniques et la microstructure de composites à matrice métallique à renforts particulaires élaborés par Osprey.
  INSA Lyon, France, 1995.
• Marrey, Ramesh V.:
  Finite Element Micromechanics Models for Predicting Stiffness and Strength of Textile Composite Materials.
  University of Florida, Gainesville, FL, 1995.
• Pandey, Ramesh:
  Micromechanics-Based Computer-Aided Design and Analysis of Two-Dimensional and Three-Dimensional Fabric Composites.
  Pennsylvania State University, State College, PA, 1995.
• Schröder, Jörg:
  Theoretische und algorithmische Konzepte zur phänomenologischen Beschreibung anisotropen Materialverhaltens.
  Universität Hannover, Germany, 1995.
• Sheng, Peiying:
  Analytical and Computational Approaches in Mechanics of Composite Materials.
  Michigan State University, East Lansing, MI, 1995.
• Shkoller, Steven:
  A Mathematical Theory for Asymptotic Analysis of Defective Fibrous Composites.
  UCSD, La Jolla, CA, 1995.
• Slifer, Scott R.:
  Cyclic Behavior of Viscoelastic Composites with Aligned Inclusions.
  Rutgers University, New Brunswick, NJ, 1995.
• Varellis, Ioannis E.:
  Effect of Interphase Layer on the Properties of Metal Matrix Composites.
  West Virginia University, Morgantown, WV, 1995.
• Wafa, Amr M.:
  Application of the Transformation Field Analysis to Inelastic Composite Materials and Structures.
  Rensselaer Polytechnic Institute, Troy, NY, 1995.
• Walter, Mark E.:
  The Evolution of Damage in Ceramic Matrix Composites.
  California Institute of Technology, Pasadena, CA, 1995.
• Weihe, Stefan:
  Fiktive Rißbildung zur Simulation der Schädigung in komplexen Bauteilen.
  Universität Stuttgart, Germany, 1995.
• Weisbrook, Christa M.:
  Analysis of Thermal Residual Stress in Tungsten Carbide-Nickel Composites using Neutron Diffraction and Finite Element Methods.
  University of Missouri - Columbia, Columbia, MO, 1995.
• Williams, Todd O.:
  Inelastic Microstructural Modeling of Metal Matrix Composites.
  University of Virginia, Charlottesville, VA, 1995.
• Wu, Yinan:
  Theory and Numerical Modeling on Thermomechanical Response of Decomposing Composites.
  Ohio State University, Columbus, OH, 1995.
• Wulf, Jürgen:
  Neue Finite-Elemente-Methoden zur Simulation des Duktilbruchs in Al/SiC.
  Universität Stuttgart, Germany, 1995.
• Yi, Wei:
  On a Circular Inclusion with Imperfect Interface Embedded in an Infinite Medium Under Thermomechanical Loading.
  University of Maryland, College Park, MD, 1995.
• Yilmaz, Safak:
  Finite Element Modelling of Deformation Behavior of SiC Particulate Reinforced Al Matrix.
  Istanbul Technical University, Istanbul, Turkey, 1995.
• Zhang, Jinmiao:
  A Hybrid Finite Element Method for Heterogeneous Media with Random Microstructures.
  Ohio State University, Columbus, OH, 1995.
• Zhong, Wei:
  An Elasto-Plastic Constitutive Behavior of a Cross-Ply Fiber Reinforced Composite.
  UCLA, Los Angeles, CA, 1995.
• Zhu, Hong-Tao:
  Modeling of Heterogeneous Plastic Deformation in Metals and Metal Matrix Composites.
  Washington State University, Pullman, WA, 1995.
  [Top]

1996

• Al-Huniti, Naser S.:
  Micromechanical Modeling of Woven and Textile Composites.
  University of Cincinnati, Cincinnati, OH, 1996.
• Al-Ostaz, Ahmed A.:
  The Influence of Random Arrangement and Interface on Elastic Fields and Fracture of Model Composite Materials.
  Michigan State University, East Lansing, MI, 1996.
• Auricchio, Ferdinando:
  Shape Memory Alloys: Applications, Micromechanics, Macromodelling and Numerical Simulations.
  UCB, Berkeley, CA, 1996.
• Bo, Zhonghe:
  Constitutive Modeling of Shape Memory Alloys.
  Texas A&M University, College Station, TX, 1996.
• Bode, Jörg:
  Die Ermittlung von Temperatureigenspannungszuständen in der Mikromechanik faserverstärkter Verbundwerkstoffe.
  Universität der Bundeswehr, Munich, Germany, 1996.
• Bonnenfant, Denis:
  Analyse théorique et expérimentale du comportement de composites particulaires modèles en vue de leur mise en forme par compaction.
  Université de la Méditerraneé, Marseille, France, 1996.
• Bornert, Michel:
  Morphologie microstructurale et comportement mécanique; charactérisations expérimentales, approches par bornes et estimations autocohérentes généralisées.
  ENPC Paris, France, 1996.
• Cheng, Cao:
  Constitutive Modeling of Creep of Metal-Matrix Composites.
  University of Pennsylvania, Philadelphia, PA, 1996.
• Dubois, Florence:
  Micro-Macro Modeling of Toughness of Thermoplastic Matrix Composites.
  Katholieke Universiteit Leuven, Belgium, 1996.
• Dumont, Serge:
  Ondelettes, homogénéisation périodique et elasticité.
  Université Montpellier 2, France, 1996.
• Forest, Samuel:
  Modèles mécaniques de la déformation hétérogène des monocristaux.
  ENSMP, Evry, France, 1996.
• Garcia-Alonso, Santiago:
  Modelización del comportamiento a tracción de materiales compuestos de matriz ceramica reforzados por fibras ceramicas a temperatura ambiente y baja velocidad de deformación.
  Universidad de Navarra, San Sebastian, Spain, 1996.
• Garnich, Mark R.:
  A Multicontinuum Theory for Structural Analysis of Composite Materials.
  University of Wyoming, Laramie, WY, 1996.
• Glaessgen, Edward H.:
  Modeling of Textile Based Composite Materials.
  Virginia Polytechnic Institute and State University, Blacksburg, VA, 1996.
• Gras Naulin, Nathalie:
  Analyse du comportement mécanique d'une mousse de carbonne à très haute température.
  ENSMP, Evry, France, 1996.
• Gross-Weege, Andreas:
  Deformation and Damage Behaviour of Particle Reinforced Metal Matrix Composites - Numerical Predictions on the Micro- and Macroscale.
  Université de Sciences et Technologies de Lille, France, 1996.
• Haddadi, Halim:
  Matériaux à matrice métallique: Modélisation du comportement thermoélastoviscoplastique et résolution de problèmes aux limites 3D par la méthode des éléments finis.
  Université de Paris XIII, Villetaneuse, France, 1996.
• Holmbom, Anders:
  Some Modes of Convergence and their Application to Homogenization and Optimal Composites Design.
  Luleå Tekniska Universitet, Sweden, 1996.
• Kunze, Joseph M.:
  Mechanisms and Models of Metal Matrix Coated Fiber Densification.
  University of Virginia, Charlottesville, VA, 1996.
• Lee, Jae Kon:
  Thermal Cycling and Creep Resistance of Metal Matrix Composites.
  University of Washington, Seattle, WA, 1996.
• Leroy, François:
  Rupture des composites unidirectionnels à fibres de carbonne: Approche micro-macro.
  Université Bordeaux I, France, 1996.
• L'Hostis, Gildas:
  Contribution à la conception et à l'étude de structures composites thermoélastiques.
  Université Pierre et Marie Curie, Paris, France, 1996.
• Liarng, Ruoh-Huei:
  Applications of the Eigenstrain Method in Inclusion Problems and Micromechanics of Coherent Metal Carbide Precipitation in Steel.
  Northwestern University, Evanston, IL, 1996.
• Livesay, Glen A.:
  Development of Homogenization Theory for Soft Tissues Undergoing Finite Elastic Deformation.
  University of Pittsburgh, Pittsburgh, PA, 1996.
• Nadeau, Joseph C.:
  Effective Predictions of and Bounds on Properties of Composite Materials with Application to Microstructural Optimization of a Functionally Graded, Textured, Thermoelastic Composite Layer.
  UCB, Berkeley, CA, 1996.
• Poza, Pedro:
  Mechanisms of Deformation and Fracture in Metal-Matrix Composites.
  Universidad Politécnica de Madrid, Spain, 1996.
• Safadi, Akram Y.:
  A Numerical Technique for Determining the Elastic Field of an Arbitrary Shaped Inhomogeneity.
  Northwestern University, Evanston, IL, 1996.
• Šejnoha, Michal:
  Micromechanical Modeling of Unidirectional Fibrous Composite Plies and Laminates.
  Rensselaer Polytechnic Institute, Troy, NY, 1996.
• Schraad, Mark W.:
  Scale Effects on the Macroscopic Properties and the Onset of Failure in Microstructured Materials.
  University of Michigan, Ann Arbor, MI, 1996.
• Silva, Matthew J.:
  Predicting the Failure Behavior of the Human Vertebral Body.
  MIT, Cambridge, MA, 1996.
• Song, Yuan:
  The Micro-Mechanics of Fracture and Creep of Metal and Ceramic Matrix Composites.
  Johns Hopkins University, Baltimore, MD, 1996.
• Søvik, Odd P.:
  Numerical Modelling of Ductile Fracture - A Damage Mechanics Approach.
  NTH, Trondheim, Norway, 1996.
• Stahl, Douglas C.:
  Micromechanical Model for a Wood-Cement Composite.
  University of Wisconsin-Madison, WI, 1996.
• Ten Busschen, Albert:
  Micromechanical Modelling of the Transverse Strength of Unidirectional Glass Fibre Reinforced Polyester.
  TU Delft, The Netherlands, 1996.
• Terada, Kenjiro:
  Global-Local Modeling for Composites by the Homogenization Method.
  University of Michigan, Ann Arbor, MI, 1996.
• Tsukrov, Igor I.:
  Micromechanics of Solids with Cracks and Holes of Various Shapes.
  Tufts University, Medford, MA, 1996.
• van Rietbergen, Bert:
  Mechanical Behavior and Adaptation of Trabecular Bone in Relation to Bone Morphology.
  Katholieke Universiteit Nijmegen, The Netherlands, 1996.
• Yadav, Sunil:
  An Experimental and Numerical Investigation of Dynamic Deformations in Metal-Matrix and Tungsten-Based Composites.
  Johns Hopkins University, Baltimore, MD, 1996.
• Zhang, Yi:
  Elastic Strength Prediction of Random Structural Composites.
  Michigan Technological University, Houghton, MI, 1996.
  [Top]

1997

• Avila, Antonio F.:
  An Integrated Methodology and Formulations for Micro/Macro Modeling and Analysis of Metal Matrix Composites.
  University of Minnesota, Minneapolis, MN, 1997.
• Bednarcyk, Brett A.:
  Macro and Micromechanics of Woven Carbon/Copper Composites.
  University of Virginia, Charlottesville, VA, 1997.
• Beyerlein, Irene J.:
  Failure of Fibrous Composites: Elastic and Time-Dependent Stress Analyses, Monte Carlo Simulation, and Probability Modeling.
  Cornell University, Ithaca, NY, 1997.
• Cai, Hongmei:
  Micromechanics Modeling of Deformation, Fracture Growth in Structural and Biological Materials.
  Johns Hopkins University, Baltimore, MD, 1997.
• Chapman, Clinton D.:
  Prediction of Moduli and Strength of Woven Carbon-Carbon Composites Using Object-Oriented Finite Element Analysis.
  Texas A&M University, College Station, TX, 1997.
• Cheng, Jiangtian:
  Micromechanics of Heterogeneous Media.
  University of Connecticut, Storrs, CT, 1997.
• Chung, Michael:
  Numerical Simulation of Damage Progression in Unidirectional Composites.
  Drexel University, Philadelphia, PA, 1997.
• Collar, Raymond R.:
  Tools for Efficient Three-Dimensional h-Adaptive Woven Composite Finite Element Analyses.
  Rensselaer Polytechnic Institute, Troy, NY, 1997.
• Davis, Jean E.:
  Micromechanical Modeling of Fiber Fragmentation in a Single Fiber Metal Matrix Composite Specimen.
  Georgia Institute of Technology, Atlanta, GA, 1997.
• Dimitrovová, Zuzana:
  Mechanical Properties of Cellular Materials.
  Instituto Superior Técnico, Lisboa, Portugal, 1997.
• Earhart, Elizabeth J.:
  Experimental Investigation of Stress and Strain Fields in a Ductile Matrix Surrounding an Elastic Inclusion.
  MIT, Cambridge, MA, 1997.
• Echle, Rainer:
  A Micro-Mechanical Fatigue Damage Model for Uni-Directional Metal Matrix Composites.
  Louisiana State University, Baton Rouge, LA, 1997.
• Elvin, Alex A.:
  Several Aspects of Polycrystalline Ice Behavior Based on Micromechanical Modeling.
  MIT, Cambridge, MA, 1997.
• Finot, Marc:
  Deformation of Multi-Layered and Graded Materials: Theory and Experiments.
  MIT, Cambridge, MA, 1997.
• Fonseca, Jun S.O:
  Design of Microstructures of Periodic Composite Materials.
  University of Michigan, Ann Arbor, MI, 1997.
• Gologanu, Mihai:
  Etude de quelques problèmes de rupture ductile des métaux.
  Université Pierre et Marie Curie, Paris, France, 1997.
• Gommers, Bart:
  De elastische eigenschappen van breiselcomposieten.
  Katholieke Universiteit Leuven, Belgium, 1997.
• Guan, Huimin:
  Micromechanical Analysis of Viscoelastic Damping in Woven Fabric-Reinforced Polymer Matrix Composites.
  Wayne State University, Detroit, MI, 1997.
• Guo, Guang:
  Etude micromécanique du comportement de structures composites a renforts discontinus.
  ENSAM Paris, France, 1997.
• Haller, Harald:
  Verbundwerkstoffe mit Formgedächtnislegierung - Mikromechanische Modellierung und Homogenisierung.
  TU München, Germany, 1997.
• Harder, Jörn:
  Simulation lokaler Fließvorgänge in Polykristallen.
  Universität Braunschweig, Germany, 1997.
• Horst, Jakob J.:
  Influence of Fibre Orientation on Fatigue of Short Glass Fibre-Reinforced Polyamide.
  TU Delft, The Netherlands, 1997.
• Hsiao, Shih-Wei:
  Numerical Analysis and Optimal Design of Composite Thermoforming Process.
  University of Michigan, Ann Arbor, MI, 1997.
• Huang, Minshiou:
  A Multivariant Model for Shape Memory Alloys.
  Northwestern University, Evanston, IL, 1997.
• Kannan, Kidambi S.:
  Galerkin Finite Element Scheme for Magnetostrictive Structures and Composites.
  University of Maryland Baltimore County, Baltimore, MD, 1997.
• Ko, Kyungil:
  Applicability of Stiffness Homogenization.
  Polytechnic University, New York, NY, 1997.
• Kolluru, Dakshinamurthy V.:
  The Creep Deformation of Directionally Solidified NiAl-Cr and NiAl-Cr (Mo) Composites.
  Carnegie Mellon University, Pittsburgh, PA, 1997.
• Liu, Yung-Ching:
  Micromechanics Analysis of the Single Fiber Fragmentation Test to Give A Better Understanding of the Fiber/Matrix Interface in Composite Materials.
  University of Utah, Salt Lake City, UT, 1997.
• Lu, Zikun:
  Micromechanics of Single Crystal and Polycrystal Shape-Memory Alloys.
  Rutgers University, New Brunswick, NJ, 1997.
• Mlekusch, Bernd:
  Kurzfaserverstärkte Thermoplaste. Charakterisierung und Messung der Faserorientierung, thermoelastische Eigenschaften sowie Schwindung und Verzug.
  Montanuniversität Leoben, Austria, 1997.
• Moorthy, Suresh:
  The Voronoi Cell Finite Element Method for Response and Damage Analysis of Arbitrary Heterogeneous Media.
  Ohio State University, Columbus, OH, 1997.
• Müller, Wolfgang H.:
  Zur Simulation des Mikroverhaltens thermo-mechanisch fehlangepaßter Werkstoffe.
  Habilitationsschrift, Universität-GH Paderborn, Germany, 1997.
• Overaker, David W.:
  Micromechanical Modeling of Open Cell Structures with Application in Finite Element Analysis of Vertebral Body Mechanics.
  Rutgers University, New Brunswick, NJ, 1997.
• Pan, Lingyun:
  Boundary Element Strategies and Discretized Green's Functions: Applications in Composite Materials and Wave Mechanics.
  Iowa State University, Ames, IA, 1997.
• Pettermann, Heinz E.:
  Derivation and Finite Element Implementation of Constitutive Material Laws for Multiphase Composites Based on Mori-Tanaka Approaches.
  TU Wien, Vienna, Austria, 1997.
• Plankensteiner, Arno F.:
  Multiscale Treatment of Heterogeneous Nonlinear Solids and Structures.
  TU Wien, Vienna, Austria, 1997.
• Quintanilla, John A.:
  Microstructure and Properties of Random Heterogeneous Materials.
  Princeton University, Princeton, NJ, 1997.
• Reisner, Gerd:
  Micromechanical Modeling of Strain Induced Martensitic Transformation in Cu-Fe Alloys and Low Alloyed TRIP Steels.
  Montanuniversität Leoben, Austria, 1997.
• Schlögl, Sabine M.:
  Micromechanical Modelling of the Deformation Behaviour of Gamma Titanium Aluminides.
  Montanuniversität Leoben, Austria, 1997.
• Schmidt, Ingo:
  Gleichgewichtsmorphologien elastischer Einschlüsse.
  TU Darmstadt, Germany, 1997.
• Shek, Kamlun:
  Finite Deformation Plasticity for Composite Structures: Computational Models and Adaptive Strategies.
  Rensselaer Polytechnic Institute, Troy, NY, 1997.
• Simone, Anthony E.:
  Porous Metals and Metallic Foams.
  MIT, Cambridge, MA, 1997.
• Srinivas, Mullahalli V.:
  Micromechanical Modeling of Composite Plies and Laminates.
  Rensselaer Polytechnic Institute, Troy, NY, 1997.
• Stone, Robert M.:
  Strength and Stiffness of Cellular Foamed Materials.
  University of Arizona, Tucson, AZ, 1997.
• Voleti, Sreenivasa R.:
  Global-Local Analysis of Composite Structures using Finite Element Method.
  Florida State University, Tallahassee, FL, 1997.
• Wegner, Leon D.:
  Mechanical Behavior of Cellular Solid Composites: Microsandwich Foams and Interpenetrating Phase Composites.
  MIT, Cambridge, MA, 1997.
• Yancey, Robert N.:
  Analysis of Stress Distributions in Metal-Matrix Composites with Variations in Fiber Spacing.
  University of Dayton, Dayton, OH, 1997.
• Zhao, Yaowu:
  The Research of Computational Micro-Mechanics on Al Alloy Fatigue Microcracks.
  Northwestern Polytechnology University, Xi'an, P.R. China, 1997.
• Zohdi, Tarek I.:
  Analysis and Adaptive Modeling of Highly Heterogeneous Elastic Structures.
  University of Texas, Austin, TX, 1997.
  [Top]

1998

• Antretter, Thomas:
  Micromechanical Modeling of High Speed Steel.
  Montanuniversität Leoben, Austria, 1998.
• Aubert, Isabelle:
  Effet de l'hétérogénéisation plastique sur le comportement macroscopique lors de chargements complexes.
  Université de Metz, Metz, France, 1998.
• Bert, Alexandre:
  Modélisation micromécanique de la transformation de phase austénite - martensite par écrouissage.
  ENSAM Cluny, France, 1998.
• Brieu, Mathias:
  Homogénéisation et endommagements de composites élastomères par techniques de calcul parallèle.
  ENS Cachan, France, 1998.
• Bulsara, Vatsal N.:
  Effects of Fiber Spatial Distribution and Interphase on Transverse Damage in Fiber-Reinforced Ceramic Matrix Composites.
  Georgia Institute of Technology, Atlanta, GA, 1998.
• Cai, Liang-Wu:
  Full-Scale Simulation of Multiple Scattering of Elastic Waves in Fiber Reinforced Composite.
  MIT, Cambridge, MA, 1998.
• Calard, Vincent:
  Approches statistiques-probabilistes du comportement mécanique des composites à matrice céramique.
  Ecole Centrale de Paris, France, 1998.
• Chimani, Christian M.:
  Micro- and Macromechanical Models for Hybrid, Selectively Reinforced Structures.
  TU Wien, Vienna, Austria, 1998.
• Choi, Jaehyon:
  Investigations Encompassing Elastic and Damage Analyses of Woven Fabric Composites.
  University of Minnesota, Minneapolis, MN, 1998.
• Connolly, Patrick:
  Computational Modeling of Crack Growth in WC-Co Hardmetals.
  National University of Ireland, Galway, 1998.
• Ding, Ke:
  Plasticity with a Ductile Interphase and Elasticity with a Linearly Graded Matrix Property in Particle and Fiber-Reinforced Composites.
  Rutgers University, New Brunswick, NJ, 1998.
• ElFishawy, Karim Fouad:
  Analytical and Numerical Modeling of the Mechanical Behavior of Metal Matrix Composites.
  Ohio State University, Columbus, OH, 1998.
• Etcheverry, Philippe:
  Etude théorique du comportement non linéaire de milieux poreux globalement isotropes.
  ENS Cachan, France, 1998.
• Feyel, Frédéric:
  Parallélisme et approches mutli-échelles en mécanique des matériaux.
  ENSMP, Evry, France, 1998.
• Fu, Yuhong:
  Rapid Solution of Large-Scale Three-Dimensional Micromechanics Problems.
  University of Texas, Austin, TX, 1998.
• Gänser, Hans-Peter:
  Large Strain Behavior of Two-Phase Materials.
  Montanuniversität Leoben, Austria, 1998.
• Griffin, David:
  Studies and Modelling of the Fracture Behavior of Composite Materials.
  University of Northumbria at Newcastle, UK, 1998.
• Hanklar, Samchai:
  Simulation à l'échelle meso du comportement mécanique des mailles tissées de renforts composites.
  Université Pierre et Marie Curie, Paris, France, 1998.
• Holmberg, Stefan:
  A Numerical and Experimental Study of Initial Defibration of Wood.
  Lunds Universitet, Sweden, 1998.
• Hönle, Stephan:
  Micromechanical Modelling of Deformation and Fracture of Graded WC/Co Hard Metals.
  Universität Stuttgart, Germany, 1998.
• Huber, John E.:
  Ferroelectrics: Models and Applications.
  University of Cambridge, UK, 1998.
• Heraud, Stéphane:
  Du polycristal au multicristal: élaboration d'un mésoscope numérique pour une analyse locale en élasto-viscoplasticité.
  Ecole Polytechnique, Palaiseau, France, 1998.
• Kailasam, Mahesh:
  A General Constitutive Theory for Particulate Composites and Porous Materials with Microstructure Evolution.
  University of Pennsylvania, Philadelphia, PA, 1998.
• Kuhn, Jonathan L.:
  Mechanical Behavior of Woven Ceramic Matrix Composites.
  University of Maryland Baltimore County, Baltimore, MD, 1998.
• Lee, Haeng-Ki:
  Three-Dimensional Micromechanical Damage Models for Effective Elastic and Elastoplastic Behavior of Composite Materials with Inhomogeneities or Microcracks.
  UCLA, Los Angeles, CA, 1998.
• Li, Jiangyu:
  Micromechanics of Heterogeneous Magnetoelectroelastic Solids.
  University of Colorado at Boulder, CO, 1998.
• Li, Mingshan:
  Characterization and Modeling of Damage in Metal Matrix Composite Microstructures.
  Ohio State University, Columbus, OH, 1998.
• Lin, Wen-Sheng:
  A Micromechanical Approach to Mechanics of Porous Media.
  Northwestern University, Evanston, IL, 1998.
• Liu, Xiao Hu:
  Plastic Kinking in Polymer Matrix Composites and Interface Debonding in Metal Matrix Composites.
  Brown University, Providence, RI, 1998.
• Mariani, Stefano:
  Simulation of Ductile Fracture: Material Models, Computational Aspects and Parameter Identification.
  Politecnico di Milano, Italy, 1998.
• McDevitt, Todd W.:
  Elastodynamics and Wave Propagation in Periodic Structures.
  University of Michigan, Ann Arbor, MI, 1998.
• Paquin, Anne:
  Modélisation micromécanique du comportement élastoviscoplastique des matériaux hétérogènes.
  Université de Metz, France, 1998.
• Papka, Scott D.:
  In-Plane Uniaxial and Biaxial Crushing of a Polycarbonate Honeycomb.
  University of Texas, Austin, TX, 1998.
• Pardoen, Thomas:
  Ductile Fracture of Cold-drawn Copper Bars: Experimental Investigation and Micromechanical Modelling.
  Université Catholique de Louvain, Belgium, 1998.
• Paroni, Roberto:
  Homogenization of Polycrystalline Aggregates.
  University of Kentucky, Lexington, KY, 1998.
• Pellegrino, Carlo:
  Omogeneizzazione di materiali compositi periodici in regime non-lineare.
  Università di Padova, Italy, 1998.
• Pottier, Thibaud:
  Modélisation multiéchelle du comportement et de l'endommagement de composites à matrice métallique.
  ENPC, Paris, France, 1998.
• Pradel, Francis:
  Homogénéisation de milieux discrèts périodiques orientés: Une application aux mousses.
  ENPC Marne-la-Vallée, Champs sur Marne, France, 1998.
• Quinn, David:
  Void Growth in Metals in Constrained Regimes.
  National University of Ireland, Galway, 1998.
• Rohde, Jutta:
  Mesoskopische Modellierung des Versagensverhaltens beschichteter gradierter Hartmetalle.
  Universität Stuttgart, Germany, 1998.
• Sangleboeuf, Jean Christophe:
  Comportement mécanique multi-échelles des composites à matrice céramique unidirectionnels.
  Ecole Polytechnique, Palaiseau, France, 1998.
• Scarber, Preston:
  Finite Element Modeling of Particle Cracking in Metal Matrix Composites.
  University of Alabama at Birmingham, Birmingham, AL, 1998.
• Shulmeister, Vladimir:
  Modelling of the Mechanical Properties of Low-Density Foams.
  TU Delft, The Netherlands, 1998.
• Silva, Emilio C. N.:
  Design of Piezocomposite Materials and Piezoelectric Transducers Using Topology Optimization.
  University of Michigan, Ann Arbor, MI, 1998.
• Smit, Robert J.M.:
  Toughness of Heterogeneous Polymeric Systems.
  TU Eindhoven, The Netherlands, 1998.
• Sun, Lizhi:
  Micromechanics and Overall Elastoplasticity of Discontinuously Reinforced Metal-Matrix Composites.
  UCLA, Los Angeles, CA, 1998.
• Taylor, Kenneth L.:
  Micro-Mechanical and Macro-Mechanical Analysis of Partial Fiber Debonding in a Composite Fiber Reinforced Structure.
  University of Texas at Arlington, Arlington, TX, 1998.
• Vandeurzen, Philippe:
  Structuur-performantie modellering van twee-dimensionale weefselcomposieten.
  Katholieke Universiteit Leuven, Belgium, 1998.
• Wang, Peng:
  Micromechanical Analysis of Failure Development in a Class of Composite Materials.
  Tulane University, New Orleans, LA, 1998.
• Wimmer, Stephanie A.:
  Compressive Failure of Microcracked and Brittle Damaged Materials and Structures.
  University of Michigan, Ann Arbor, MI, 1998.
• Wu, Wei:
  Stress Transfer through the Fiber-Matrix Interphase in Axially Loaded Composites.
  Katholieke Universiteit Leuven, Belgium, 1998.
• Yoon, Chongho:
  Homogenization and Fracture Models for Thermoviscoelastic Solids.
  Texas A&M University, College Station, TX, 1998.
• Zhang, Jun:
  Constitutive Modeling and Optimal Design of Polymeric Foams for Crashworthiness.
  University of Michigan, Ann Arbor, MI, 1998.
• Zhu, Changming:
  Constitutive Modeling of Polymeric Composites Under Various Loading Conditions.
  Purdue University, West Lafayette, IN, 1998.
  [Top]

1999

• Abedian, Ali:
  Thermal Stress Analysis of Unidirectional Fiber-Reinforced Composites.
  University of Saskatchewan, Saskatoon, SK, 1999.
• Derr, Robert:
  Statistical Modeling of Microstructure with Application to Effective Property Computation in Materials Science.
  University of North Carolina, Chapel Hill, NC, 1999.
• Edlabadkar, Vivek H.:
  Transient Thermal Stress Analysis of Functionally Graded Materials.
  University of Texas at Arlington, Arlington, TX, 1999.
• Geyer, Philippe:
  Comportement élasto-viscoplastique de tubes en Zircaloy-4 - Approche éxperimentale et modélisation micromécanique.
  ENSMP, Evry, France, 1999.
• González, Carlos:
  Dos modelos micromecánicos de deformación con daño en materiales compuestos.
  Universidad Politécnica de Madrid, Spain, 1999.
• Graham, Samuel:
  Effective Thermal Conductivity of Damaged Composites.
  Georgia Institute of Technology, Atlanta, GA, 1999.
• Huysmans, Gert:
  Unified Micromechanical Models for Textile Composites.
  Katholieke Universiteit Leuven, Belgium, 1999.
• Lee, Kyunghoon:
  Adaptive Multiple Scale Finite Element Modeling of Response and Damage in Heterogeneous Materials.
  Ohio State University, Columbus, OH, 1999.
• Le Pen, Eric:
  Approche micromécanique du comportement en fatigue d'un matériau composite à matrice aluminium renforcé par fibres d'alumine.
  ENSAM Paris, France, 1999.
• Lielens, Gregory:
  Micro-Macro Modeling of Structured Materials.
  Université Catholique de Louvain, Belgium, 1999.
• Martin, Carole:
  Contribution à l'homogéenéisation du comportement viscoélastique et de la détérioration d'un classe d'élastomères fortement chargés.
  Université de Poitiers - ENSMA, France, 1999.
• Masson, Renaud:
  Estimations non linéaires du comportement global de matériaux hétérogènes en formulation affine. Application aux alliages de zirconium.
  Ecole Polytechnique, Palaiseau, France, 1999.
• Mayes, J. Steven:
  Multicontinuum Failure Analysis of Composite Structural Laminates.
  University of Wyoming, Laramie, WY, 1999.
• Meske, Ralf:
  Mikromechanische Modellierung und experimentelle Untersuchung der Spannungsübertragung auf einlaminierte Detektionspartikel.
  Universität Karlsruhe, Germany, 1999.
• Mohammadi-Aghdam, Mohammad:
  Micromechanics of Unidirectional Metal Matrix Composites.
  University of Bristol, UK, 1999.
• Schröter, Falko:
  Numerische Simulationen zu bidirektional mit Langfasern verstärktem Aluminium unter Nutzung gekoppelter Ansätze zur Erfassung von Viskoplastizität und Schädigung.
  Universität des Saarlandes, Saarbrücken, Germany, 1999.
• Steglich, Dierk:
  Bestimmung von mikrostrukturellen Parametern in Schädigungsmodellen für duktile Metalle.
  TU Berlin, Germany, 1999.
• Stroeven, Martijn:
  Discrete Numerical Modeling of Composite Materials - Application to Cementitious Materials.
  TU Delft, The Netherlands, 1999.
• Teixeira Dias, Filipe M.H.V.:
  Tensões Residuais de Origem Térmica em Materiais Compósitos de Matrix Metálica.
  Universidade de Coimbra, Portugal, 1999.
• Zhang, Xiaodong:
  Micromechanics and Effective Mechanical Behavior of Composites with Randomly Located Aligned Fibers.
  UCLA, Los Angeles, CA, 1999.
  [Top]

2000

• Abdelal, Gasser F.:
  A Three-Phase Constitutive Model for Macrobrittle Fatigue Damage of Composites.
  West Virginia University, Morgantown, WV, 2000.
• Abell, Anne Bernardine:
  Microstructure and its Relationship to Fracture in Portland Cement Mortar and Concrete.
  University of Illinois at Urbana-Champaign, Urbana, IL, 2000.
• Barbe, Fabrice:
  Modélisation du comportement mécanique d'agregats polycristallins.
  ENSMP, Evry, France, 2000.
• Bardella, Lorenzo:
  Mechanical Behavior of Glass-Filled Epoxy Resins: Experiments, Homogenization Methods for Syntactic Foams, and Applications.
  Universitá degli Studi di Brescia, Italy, 2000.
• Boselli, Julien:
  Quantification of the Effects of Reinforcement Distribution and Morphology on Fatigue in Al-SiCp Composites.
  University of Southampton, UK, 2000.
• Bruzzi, Mark:
  Development of Models to Predict the Mechanical Response of Aluminium and Aluminium Matrix Composites in Static and Fatigue Loading.
  National University of Ireland, Galway, 2000.
• Bugat, Stéphane:
  Comportement et endommagement des aciers austéno-ferritiques: Une approche micromécanique.
  ENSMP, Evry, France, 2000.
• Caiazzo, Anthony A.:
  Computational Methods for Determination of the Effective Constitutive Relations of Composite Materials with Growing Cracks.
  Pennsylvania State University, State College, PA, 2000.
• Dong, Zhifa:
  The Effective Transverse Response of Fiber Reinforced Composites with Nonlinear Interfaces.
  Syracuse University, Syracuse, NY, 2000.
• Galliet, Isabelle:
  Une version parallèle des méthodes asymptotiques numériques: Application à des structures complexes à base d'élastomères.
  Université de la Méditerranée, Marseille, France, 2000.
• Haan, Seung-Ill:
  Modeling of the Mechanical Response of Plain Weave Composites.
  University of Maryland Baltimore County, Baltimore, MD, 2000.
• Heyden, Susanne:
  Network Modelling for the Evaluation of Mechanical Properties of Cellulose Fiber Fluff.
  Lunds Universitet, Sweden, 2000.
• Huyse, Luc J.C.:
  Micromechanically-Based Random Field Characterization of Structural Material Properties.
  University of Calgary, Calgary, AB, Canada, 2000.
• Jadhav, Virendra R.:
  Micro-Mechanical Analysis of Unidirectional Composites.
  Washington University, St.Louis, MO, 2000.
• Jiang, Mingxiao:
  Scale and Boundary Condition Effects in Fiber-Reinforced Composites.
  Georgia Institute of Technology, Atlanta, GA, 2000.
• Kotha, Shiva Prasad:
  Micromechanical Model to Explain the Mechanical Properties of Bovine Cortical Bone in Tension: In Vitro Fluoride Ion Effects.
  Rutgers University, New Brunswick, NJ, 2000.
• Kumar, Rajesh Shyamraj:
  Effects of Damage and Viscoelasticity on the Constitutive Behavior of Fiber-Reinforced Composites.
  Georgia Institute of Technology, Atlanta, GA, 2000.
• Lüsebrink, Oliver:
  Einfluß grober Partikel auf die Kriechrißausbreitung am Beispiel einer Kobalt-Hartlegierung.
  Ruhr-Universität Bochum, Germany, 2000.
• Nebozhyn, Michael V.:
  Variational and Self Consistent Estimates for the Effective Behavior of Viscoplastic Polycrystals.
  University of Pennsylvania, Philadelphia, PA, 2000.
• Nielsen, A.S.:
  Micromechanical Modeling of Thermal Stresses in Polymer Matrix Composites Based on Raman Microscopy.
  Aalborg Universitet, Denmark, 2000.
• Pandorf, Robert:
  Ein Beitrag zur FE-Simulation des Kriechens partikelverstärkter metallischer Werkstoffe.
  Ruhr-Universität Bochum, Germany, 2000.
• Parteder, Erik:
  Ein Modell zur Simulation von Umformprozessen hochschmelzender Metalle.
  RWTH Aachen, Germany, 2000.
• Persson, Kent:
  Micromechanical Modelling of Wood and Fibre Properties.
  Lunds Universitet, Sweden, 2000.
• Poizat, Christophe:
  Modélisation numérique de matériaux et structures à fibres piézoélectriques.
  Université de Technologie de Troyes, France, 2000.
• Schwabe, Frank:
  Einspieluntersuchungen von Verbundwerkstoffen mit periodischer Mikrostruktur.
  RWTH Aachen, Germany, 2000.
• Šejnoha, Michal:
  Micromechanical Analysis of Random Composites.
  Habilitation Thesis, CTU, Prague, Czech Republic, 2000.
• Sharma, Pradeep:
  Micromechanics of Creep-Fatigue Damage in Heterogeneous Alloys.
  University of Maryland, College Park, MD, 2000.
• Sheng, Hongnian:
  An Elliptic Inclusion with Imperfect Interface Embedded in an Infinite Elastic Medium.
  University of Alberta, Edmonton, AB, Canada, 2000.
• Siruguet, Karine:
  Rupture ductile à basse triaxialité: Effet des inclusions sur la croissance et la coalescence des cavités.
  Université Pierre et Marie Curie, Paris, France, 2000.
• Somphone, Thada:
  Micromechanics of Smart Electrostrictive Materials.
  University of Tennessee, Knoxville, TN, 2000.
• Steen Nielsen, Anders:
  Micromechanical Modelling of Thermal Stresses in Polymer Matrix Composites Based on Raman Microscopy.
  Aalborg Universitet, Denmark, 2000.
• Sudak, Leszek J.:
  A Circular Inclusion with Circumferentially Inhomogeneous Imperfect Interface in Plane Elasticity.
  University of Alberta, Edmonton, AB, Canada, 2000.
• van Vliet, Marcel R.A.:
  Fracture in Brittle Matrix Composites with Varying Particle Content.
  TU Delft, The Netherlands, 2000.
• Vemaganti, Kumar S.:
  Local Error Estimation and Goal-Oriented Adaptive Modeling of Heterogeneous Structures.
  University of Texas at Austin, Austin, TX, 2000.
• Zhai, Jun:
  Micromechanical Modeling of Dynamic Fracture in Heterogeneous Materials.
  Georgia Institute of Technology, Atlanta, GA, 2000.
• Zheng, Shanfu:
  The Effect of Interphase and Interfacial Cracks on the Elastic and Elastoplastic Behavior of Fiber-Reinforced Composites.
  Rutgers University, New Brunswick, NJ, 2000.
• Zhou, Yuanxin:
  Damage Constitutive Model of Unidirectional Metal Matrix Composites.
  University of Science and Technology of China, Hefei, P.R. China, 2000.
• Zimmermann, André:
  Eigenspannungsverteilung, Mikrorißbildung und Versagen in Keramiken und Verbundwerkstoffen.
  TU Darmstadt, Germany, 2000.
  [Top]

2001

• Agrawal, Parul:
  Micromechanical and Fracture Characteristics of Metal-Ceramic Composites.
  Purdue University, West Lafayette, IN, 2001.
• Bhattacharya, Anandaroop:
  Thermophysical Properties and Convective Transport in Metal Foams and Finned Metal Foam Sinks.
  University of Colorado at Boulder, Boulder, CO, 2001.
• Böhlke, Thomas:
  Crystallographic Texture Evolution and Elastic Anisotropy: Simulation, Modeling, and Applications.
  Universität Magdeburg, Germany, 2001.
• Bonfoh, Napo:
  Modélisation micromécanique de l'écrouissage des matériaux polycristallins contentant des hétérogénéités intergranulaires.
  Université de Metz, France, 2001.
• Brenner, Renald:
  Influence de la microstructure sur le comportement en fluage thermique d'alliages de zirconium: Analyse expérimentale et mise en oeuvre de méthodes d'homogénéisation.
  Université de Paris XIII, Villetaneuse, France, 2001.
• Briggs, Jonathan P.:
  On the Control of Shape Memory Alloy Fiber-Reinforced Composites.
  University of Pennsylvania, Philadelphia, PA, 2001.
• Carrère, Nicolas:
  Sur l'analyse multiéchelle des matériaux composites à matrice métallique: Application au calcul de structure.
  Ecole Polytechnique, Palaiseau, France, 2001.
• Döbert, Christine:
  Meso-Makromechanische Modellierung von Faserverbundwerkstoffen mit Schädigung.
  Universität Hannover, Germany, 2001.
• Fröhlich, Andreas:
  Mikromechanisches Modell zur Ermittlung effektiver Materialeigenschaften von piezoelektrischen Polykristallen.
  Universität Karlsruhe, Germany, 2001.
• Goh, Keng-Lim:
  Fibre Reinforcement in Fibre Composite Materials: Effect of Fibre Shape.
  University of Aberdeen, UK, 2001.
• Lahellec, Noël:
  Homogénéisation et étude éxperimentale de composites hyperélastiques et visco-hyperélastiques.
  Université de la Méditerranée, Marseille, France, 2001.
• Luo, Chunhui:
  Modeling the Behavior of Inclusions in Plastic Deformation of Steels.
  KTH, Stockholm, Sweden, 2001.
• Meidell, Annette:
  Homogenization and Computational Methods for Calculating Effective Properties of Some Cellular Solids and Composite Structures.
  NTH, Trondheim, Norway, 2001.
• Montminy, Matthew D.:
  Complete Structural Characterization of Foams Using 3D Imaging.
  University of Minnesota, Minneapolis, MN, 2001.
• Müller, Ralf:
  3D-Simulation der Mikrostrukturentwicklung in Zwei-Phasen-Materialien.
  TU Darmstadt, Germany, 2001.
• Pulizzotto, Ian F.:
  Heat Flow in a Random Medium and Homogenization.
  University of Michigan, Ann Arbor, MI, 2001.
• Subramanian, Sankara Jayaraman:
  Micromechanical Modeling of the Interaction of Diffusion Mechanisms and Surface Energy with Nonlinear Material Deformation: Application to Powder Densification and Void Growth.
  University of Illinois at Urbana-Champaign, Urbana, IL, 2001.
• Thomson, Cheryl I.A.:
  Modeling the Effects of Particle Clustering on Ductile Failure.
  Carleton University, Ottawa, ON, Canada, 2001.
• van der Sluis, Olaf:
  Homogenisation of Structured Elastoviscoplastic Solids.
  TU Eindhoven, The Netherlands, 2001.
• Wang, Hui:
  Experimental Investigation and Hierarchical Modeling of FRP Materials for Automobile Application.
  University of Michigan, Ann Arbor, MI, 2001.
• Wu, Cynthia:
  Micromechanical Tailoring of PVA-ECC for Structural Applications.
  University of Michigan, Ann Arbor, MI, 2001.
• Yu, Qing:
  Computational Homogenization for the Advanced Materials and Structures with Multiple Spatial and Temporal Scales.
  Rensselaer Polytechnic Institute, Troy, NY, 2001.
• Zalamea, Fernando:
  Tratamiento numérico de materiales compuestos mediante la teoría de homogeneización.
  Universitat Politècnica de Catalunya, Barcelona, Spain, 2001.
  [Top]

2002

• Arns, Christoph H.:
  The Influence of Morphology on Physical Properties of Reservoir Rocks.
  University of New South Wales, Sydney, Australia, 2002.
• Arwade, Sanjay R.:
  Stochastic Characterization and Simulation of Material Microstructures with Application to Aluminum.
  Cornell University, Ithaca, NY, 2002.
• Babout, Laurent:
  Etude par tomographie X et modélisation de l'endommagement de matériaux métalliques modèles.
  INSA Lyon, France, 2002.
• Bandorawalla, Tozer Jamshed:
  Micromechanics-Based Strength and Lifetime Prediction of Polymer Composites.
  Virginia Polytechnic Institute and State University, Blacksburg, VA, 2002.
• Berbenni, Stéphane:
  Elastoviscoplasticité des aciers polycrystallins: Modélisation micromécanique et physique.
  ENSAM Metz, France, 2002.
• Clayton, John D.:
  Homogenization and Incompatibility Fields in Finite Strain Elastoplasticity. Georgia Institute of Technology, Atlanta, GA, 2002.
• Daxner, Thomas:
  Multi-Scale Modeling and Simulation of Metallic Foams.
  TU Wien, Vienna, Austria, 2002.
• Dong, Xuanliang:
  Micromechanics of Cortical Bone.
  Columbia University, New York, NY, 2002.
• Eckschlager, Anton:
  Simulation of Particle Failure in Particle Reinforced Ductile Matrix Composites.
  TU Wien, Vienna, Austria, 2002.
• Entchev, Pavlin B.:
  Micromechanical Modeling of Porous Shape Memory Alloys.
  Texas A&M University, College Station, TX, 2002.
• Fernberg, Patrick:
  Toughness of Short Fiber Composites: An Approach Based on Crack Bridging.
  Luleå Tekniska Universitet, Sweden, 2002.
• Fisher, Frank T.:
  Nanomechanics and the Viscoelastic Behavior of Carbon Nanotube-Reinforced Polymers.
  Northwestern University, Evanston, IL, 2002.
• Gammage, Justin:
  Damage in Heterogeneous Aluminium Alloys.
  McMaster University, Hamilton, ON, Canada, 2002.
• Gamsjäger, Ernst:
  Diffusional Phase Transformation in Low Alloy Steels – Theory and Application to Continuous Casting.
  Montanuniversität Leoben, Austria, 2002.
• Geandier, Guillaume:
  Relation entre la microstructure, l'état mécanique et la fissuration de cermets alumine chrome élaborés à partir de poudres nanocomposites.
  INP de Lorraine, Nancy, France, 2002.
• Hartmann, Oliver:
  Einfluß der Matrixfestigkeit und der Morphologie der Verstärkungsphase von Metallmatrix-Vergbundwerkstoffen auf deren zyklisches Verformungsverhalten bei Temperaturen zwischen -100C und 300C.
  Universität Erlangen–Nürnberg, Germany, 2002.
• Hu, Xiaochun:
  An Information-Based Framework for Composite Design.
  Drexel University, Philadelphia, PA, 2002.
• Jekabsons, Normunds:
  Mechanics of Composites with Fiber Bundle Meso-Structure.
  Luleå Tekniska Universitet, Sweden, 2002.
• Kilic, Mustafa H.:
  Three-Dimensional Micromechanical Models for the Nonlinear Analysis of Pultruded Composite Structures.
  Georgia Institute of Technology, Atlanta, GA, 2002.
• Kim, Hyung Joo:
  Multi-Scale Computational Homogenization of Composites with Voxel-Based Meshing and Element Splitting Techniques.
  University of Iowa, Iowa City, IA, 2002.
• Knight, Matthew G.:
  Numerical Modelling of Particulate and Fibre Reinforced Composites.
  Brunel University, Uxbridge, UK, 2002.
• Kouznetsova, Varvara G.:
  Computational Homogenization for the Multi-Scale Analysis of Multi-Phase Materials.
  TU Eindhoven, The Netherlands, 2002.
• Laroussi, Myriam:
  Modélisation du comportement des mousses solides à porosité ouverte: Une approche micromécanique.
  ENPC Marne-la-Vallée, Champs sur Marne, France, 2002.
• Megnis, Modris:
  Inelastic Analysis of Fiber Reinforced Polymeric Composites.
  Luleå Tekniska Universitet, Sweden, 2002.
• Niordson, Christian:
  Non-Local Modeling of Materials.
  DTU, Lyngby, Denmark, 2002.
• Öchsner, Andreas:
  Experimentelle und numerische Untersuchung des elastoplastischen Verhaltens zellularer Modellwerkstoffe.
  Universität Erlangen–Nürnberg, Germany, 2002.
• Sanders, Wynn S.:
  Mechanical Behavior of Closed-Cell and Hollow-Sphere Metallic Foams.
  MIT, Cambridge, MA, 2002.
• Siragy, Eman F.:
  Characterization of Local Response of Random Heterogeneous Materials Using Moving-Window GMC and Finite Element Analysis.
  University of Virginia, Charlottesville, VA, 2002.
• Tang, Xiaodong:
  Micromechanics of Two-Dimensional Woven Composites.
  Texas A&M University, College Station, TX, 2002.
• Zhou, Chao Hui:
  Time Dependent Micromechanics in Continuous Graphite Fiber/Epoxy Composites with Fiber Breaks.
  Rensselaer Polytechnic Institute, Troy, NY, 2002.
• Zohdi, Tarek I.:
  Micro-Macro Modeling, Computational Testing and Design of Advanced Materials.
  Habilitationsschrift, Universität Hannover, Germany, 2002.
  [Top]

2003

• Antretter, Thomas:
  Experimental and Numerical Investigations of the Mechanics of Martensitic Transformation.
  Habilitationsschrift, Montanuniversität Leoben, Austria, 2003.
• Blazy, Jean-Sébastien:
  Comportement mécanique des mousses d'aluminium. Caractérisations expérimentales sous sollicitations complexes et simulation dans le cadre de l'élasto-plasticité compressible.
  ENSMP, Evry, France, 2003.
• Benedikt, Bart:
  Analysis of Residual Stresses in Graphite Fiber/PMR-15 Composites.
  University of Denver, Denver, CO, 2003.
• Damiani, Thomas M.:
  Mesomechanics of Fabric Reinforced Composites.
  West Virginia University, Morgantown, WV, 2003.
• Danielsson, Mats:
  Micromechanics, Macromechanics and Constitutive Modeling of the Elastoviscoplastic Deformation of Rubber-Toughened Glassy Polymers.
  MIT, Cambridge, MA, 2003.
• Duschlbauer, Dominik:
  Computational Simulation of the Thermal Conductivity of MMCs under Consideration of the Inclusion-Matrix Interface.
  TU Wien, Vienna, Austria, 2003.
• Fazekas, Arnaud
  Etude des de l'influence des dispersions microstructurals sur les propriétés effectives des matériaux cellulaires.
  INP Grenoble, France, 2003.
• Gasser, Stéphane:
  Etude des propriétés acoustiques et mécaniques d'un matériau métallique poreux modèle à base de sphères creuses de nickel.
  INP Grenoble, France, 2003.
• Gupta, Nikhil:
  Characterization of Syntactic Foams and Their Sandwich Composites: Modeling and Experimental Approaches.
  Louisiana State University, Baton Rouge, LA, 2003.
• Hanan, Jay C.:
  Damage Evolution in Uniaxial Silicon Carbide Fiber-Reinforced Titanium Matrix Composites.
  California Institute of Technology, Pasadena, CA, 2003.
• Hohe, Jörg:
  Elastizitätsverhalten von Sandwich-Zellkernen und zweidimensionalen Modellschäumen.
  Habilitationsschrift, Gesamthochschule Siegen, Germany, 2003.
• Jin, Yongmei:
  Theory, Modeling, and Simulation of Structural and Functional Materials: Micromechanics, Microstructures, and Properties.
  Rutgers University, New Brunswick, NJ, 2003.
• Kanit, Toufik:
  Notion of Representative Volume Element for Heterogeneous Materials: Statistical and Numerical Approach.
  ENSMP, Evry, France, 2003.
• Liu, Yi:
  Macroscopic Behavior, Field Fluctuations and Texture Evolution in Viscoplastic Polycrystals.
  University of Pennsylvania, Philadelphia, PA, 2003.
• Luo, Dongmei:
  The Numerical Simulation of Macro-Microscopic Mechanical Behaviors for CFCC with Anisotropic Damage by Homogenization Method.
  Toyohashi University of Science and Technology, Japan, 2003.
• Lusti, Hans R.:
  Property Predictions for Short Fiber and Platelet Filled Materials by Finite Element Calculations.
  ETH Zürich, Zurich, Switzerland, 2003.
• Magouariec, Hélène:
  Adaptation élastoplastique et homogénéisation périodique.
  Université de la Méditerranée, Marseille, France, 2003.
• Messner, Christof:
  Thermal and Mechanical Loading of Duplex Steel.
  TU München, Germany, 2003.
• Park, Jae Seong:
  Effect of Contiguity on the Mechanical Behavior of Co-Continuous Ceramic-Metal Composites.
  Purdue University, West Lafayette, IN, 2003.
• Pahr, Dieter H.:
  Experimental and Numerical Investigations of Perforated FRP-Laminates.
  TU Wien, Vienna, Austria, 2003.
• Pettermann, Heinz E.:
  Continuum Mechanics Modeling of Composite Materials.
  Habilitationsschrift, TU Wien, Vienna, Austria, 2003.
• Simone, Angelo:
  Continuous-Discontinuous Modelling of Failure.
  TU Delft, The Netherlands, 2003.
• van Dommelen, Johannes A.W.:
  Micromechanics of Particle-Modified Semicrystalline Polymers.
  TU Eindhoven, The Netherlands, 2003.
• Weissenbach, Gerd:
  Issues in the Analysis and Testing of Textile Composites with Large Representative Volume Elements.
  University of Ulster, Newtonabbey, UK, 2003.
• Yan, Chang:
  On Homogenization and De-Homogenization of Composite Materials.
  Drexel University, Philadelphia, PA, 2003.
• Zeman, Jan:
  Analysis of Composite Materials with Random Microstructure.
  CTU, Prague, Czech Republic, 2003.
  [Top]

2004

• Chen, Zengtao:
  The Role of Heterogeneous Particle Distribution in the Prediction of Ductile Fracture.
  University of Waterloo, Waterloo, ON, Canada, 2004.
• Collini, Luca:
  Micromechanical Modeling of the Elasto-Plastic Behavior of Heterogeneous Nodular Cast Iron.
  Universitá degli Studi di Parma, Italy, 2004.
• Dillard, Thierry:
  Caractérisation et simulation numérique du comportement mé:canique des mousses de nickel: Morphologie tridimensionelle, réponse élastoplastique et rupture.
  ENSMP, Evry, France, 2004.
• Kim, Byoung Yoon:
  Shakedown Analysis of Fiber-Reinforced Metal Matrix Composites under Fusion-Relevant Thermal Loading.
  TU München, Germany, 2004.
• Li, Ke:
  Micromechanical Modeling of Graphitic Carbon Foams.
  Michigan Technological University, Houghton, MI, 2004.
• Liu, Haitao:
  Effects of Damage and Thermal Residual Stresses on the Overall Elastoplastic Behavior of Particle-Reinforced Metal Matrix Composites.
  University of Iowa, Iowa City, IA, 2004.
• Love, Bryan M.:
  Multiscale Analysis of Failure in Heterogeneous Solids under Dynamic Loading.
  Virginia Polytechnic Institute and State University, Blacksburg, VA, 2004.
• Markovic, Damijan:
  Multi-Scale Modeling of Heterogeneous Structures with Nonlinear Inelastic Behaviors.
  ENS Cachan, France, 2004.
• Mittra, Erik S.:
  Assessment of Trabecular Bone Quality Using Microstructure, Micro-Mechanics and Micro-Finite Element Modeling.
  SUNY, Stony Brook, NY, 2004.
• Muliana, Anastasia H.:
  Integrated Micromechanical-Structural Framework for the Nonlinear Viscoelastic Behavior of Laminated and Pultruded Composite Materials and Structures.
  Georgia Institute of Technology, Atlanta, GA, 2004.
• Novak, Jindrich:
  Effective Elastic Properties of Two-Dimensional Solids with Inhomogeneities of Irregular Shapes.
  University of New Hampshire, Durham, NH, 2004.
• Prodromou, Andreas:
  Mechanische modellering van textielcomposieten gebruik makend van de celmethode.
  Katholieke Universiteit Leuven, Belgium, 2004.
• Raghavan, Prasanna:
  Multi-Scale of Elastic and Debonding Composites by an Adaptive Multi-Level Computational Model.
  Ohio State University, Columbus, OH, 2004.
• Richter, Mike:
  Entwicklung mechanischer Modelle zur analytischen Beschreibung der Materialeigenschaften von textilbewehrtem Feinbeton.
  TU Dresden, Germany, 2004.
• Riedel, Werner:
  Beton unter dynamischen Lasten: Meso- und Makromodelle und ihre Parameter.
  Universität der Bundeswehr, Munich, Germany, 2004.
• Segurado, Javier:
  Micromecánica computacional de materiales compuestos reforzados con partículas.
  Universidad Politécnica de Madrid, Spain, 2004.
• To, Hansun T.:
  Homogenization of Dynamic Materials.
  Temple University, Philadelphia, PA, 2004.
• Wang, Jianlin:
  Numerical Modeling of Elastic Materials with Inclusions, Holes, and Cracks.
  University of Minnesota, Minneapolis, MN, 2004.
• Yin, Huiming:
  Micromechanics-Based Magneto-Elastic Constitutive Modeling of Particulate Composites.
  University of Iowa, Iowa City, IA, 2004.
  [Top]

2005

• Andia, Pedro C.:
  Mechanical Properties of Particle Systems using a Molecular Dynamics Approach Inspired by Continuum Homogenization.
  Pennsylvania State University, State College, PA, 2005.
• Bansal, Yogesh:
  Finite Volume Direct Averaging Micromechanics of Heterogeneous Media.
  University of Virginia, Charlottesville, VA, 2005.
• Breitzman, Timothy D.:
  Multiscale Strain Analysis.
  Louisiana State University, Baton Rouge, LA, 2005.}
• Cho, Jeong-Min:
  Effect of Inclusion Size on Failure Mechanism and Mechanical Properties of Polymeric Composites Containing Micro and Nano Particles.
  Purdue University, West Lafayette, IN, 2005.
• Côté, François:
  Metallic Lattice Materials for Sandwich Cores.
  University of Cambridge, UK, 2005.
• Dai, Quingli:
  Micromechanical Modeling of Constitutive and Damage Behavior of Heterogeneous Asphalt Materials.
  University of Rhode Island, Kingston, RI, 2005.
• Drabek, Thomas:
  Modeling of Matrix Damage in Particle Reinforced Ductile Matrix Composites.
  TU Wien, Vienna, Austria, 2005.
• Druma, Adriana M.:
  Analysis of Carbon Foams by Finite Element Method.
  Ohio University, Athens, OH, 2005.
• Engelen, Roy A.B.:
  Plasticity Induced Damage in Metals - Nonlocal Modelling at Finite Strains.
  TU Eindhoven, The Netherlands, 2005.
• Fan, Jian-Ping:
  Damage Analysis of Particulate Biocomposites Using Finite Element Techniques.
  Hong Kong Polytechnic University, Hong Kong, 2005.
• Fang, Zhibin:
  Image-Guided Modeling, Fabrication and Micromechanical Analysis of Bone and Heterogeneous Structure.
  Drexel University, Philadelphia, PA, 2005.
• Freßmann, Dirk Stefan:
  On Single- and Multi-Material Arbitrary Langrangian-Eulerian Approaches with Applications to Micromechanical Problems at Finite Deformations.
  Universität Hannover, Germany, 2005.
• Gong, Lixin:
  The Compressive Response of Open-Cell Foams.
  University of Texas, Austin, TX, 2005.
• Guiot, Boris:
  Contribution à la transition d'échelles en (visco)-hyperélasticité pour une classe d'élastomères fortement chargés.
  ENSMA Poitiers, France, 2005.
• Harders, Harald:
  Simulation des Ermüdungsverhaltens von Metallschäumen.
  TU Braunschweig, Germany, 2005.
• Heggli, Martin:
  Complex Multiphase Materials: Microstructure Characterization and Finite Element Property Predictions.
  ETH Zürich, Zurich, Switzerland, 2005.
• Hobbiebrunken, Thomas:
  Microscopic Transverse Failure Initiation in Composite Materials: An Interdisciplinary Multi-Scale Research.
  Kyoto University, Kyoto, Japan, 2005.
• Jendli, Zouhaier:
  Analyse et modélisation multi-échelles du comportement mécanique sous sollicitations rapides de composite SMC.
  ENSAM Paris, France, 2005.
• Ko, Yu-Fu:
  Effective Elastoplastic-Damage Model for Fiber-Reinforced Metal Matrix Composites with Evolutionary Fibers Debonding.
  UCLA, Los Angeles, CA, 2005.
• Kristensson, Ola:
  Micromechanical Modeling Using Computational Homogenization.
  Lunds Universitet, Lund, Sweden, 2005.
• Lani, Frédéric:
  Micromechanical Modeling of Dual-Phase Elasto-Plastic Materials: Influence of the Anisotropy, Co-Continuity and Transformation of the Phases.
  Université Catholique de Louvain, Belgium, 2005.
• Le Quang, Hung:
  Microstructures solubles et relations exactes en micromécanique.
  Université Marne-la-Vallée, Champs sur Marne, France, 2005.
• Lenz, Christian:
  Numerical Micro-Meso Modeling of Mechanosensation Driven Remodeling in Cortical Bone.
  Universität Hannover, Germany, 2005.
• Löhnert, Stefan:
  Computational Homogenization of Microheterogeneous Materials at Finite Strains Including Damage.
  Universität Hannover, Germany, 2005.
• Marcadon, Vincent:
  Effets de taille et d'interphase sur le comportement mécanique de nanocomposites particulaires.
  Ecole Polytechnique, Palaiseau, France, 2005.
• Mattson, David:
  Mechanical Performance of NCF Composites.
  Luleå Tekniska Universitet, Sweden, 2005.
• Mehraeen, Shafigh:
  Multi-Scale Formulation for Heterogeneous Materials with Fixed and Evolving Microstructures.
  UCLA, Los Angeles, CA, 2005.
• Mishnaevsky, Leon L.:
  Numerical Experiments in the Mesomechanics of Materials.
  Habilitationsschrift, TU Darmstadt, Germany, 2005.
• Nieh, Shihua:
  A Micromechanical Study of the Damage Mechanics of Acrylic Particulate Composites under Thermomechanical Loading.
  SUNY, Buffalo, NY, 2005.
• Ribeiro-Ayeh, Steven:
  Finite Element Modelling of the Mechanics of Solid Foam Materials.
  KTH, Stockholm, Sweden, 2005.
• Rupnowski, Przemek:
  Multiscale Stress and Damage Initiation Analyses in Graphite/Polyimide Composites.
  University of Denver, Denver, CO, 2005.
• Sarvestani, Ali:
  Models for the Viscoelastic Behavior of Polymer Nanocomposites.
  Rensselaer Polytechnic Institute, Troy, NY, 2005.
• Shabrov, Maxim N.:
  Micromechanical Modeling of Void Nucleation in Two Phase Materials.
  Brown University, Providence, RI, 2005.
• Stauber, Martin:
  Volumetric Spatial Decomposition of Porous Microstructures - A Framework for Element Based Analysis of Trabecular Bone.
  ETH Zürich, Zurich, Switzerland, 2005.
• Ströhla, Stefan:
  Numerische und experimentelle Untersuchung des elastisch-plastischen Verhaltens von Metallschäumen.
  Universität Erlangen–Nürnberg, Germany, 2005.
• Sun, Huiyu:
  Mechanics of Fiber Reinforced Matrials.
  UCD, Davis, CA, 2005.
• Trias, Daniel:
  Analysis and Simulation of Transverse Random Fracture of Long Fibre Reinforced Composites.
  Universitat de Girona, Spain, 2005.
• Wang, Hongqing V.:
  A Unit Cell Approach for Lightweight Structure and Compliant Mechanism.
  Georgia Institute of Technology, Atlanta, GA, 2005.
• Werwer, Malte:
  Mikromechanische Modellierung des Verformungs- und Bruchverhaltens von lamellarem TiAl.
  TU Hamburg-Harburg, Hamburg, Germany, 2005.
• Wicklein, Markus:
  Zellulares Aluminium: Entwicklung eines makromechanischen Materialmodells mittels mesomechanischer Simulation.
  Universität der Bundeswehr, Munich, Germany, 2005.
• Xie, Mayue:
  Interface Problems in Micromechanics and Effective Composite Property Analysis.
  Syracuse University, Syracuse, NY, 2005.
  [Top]

2006

• Alqaraleh, Sahar M.:
  Variational Principles for Linear and Nonlinear Mixtures: New Derivations and Application to Bilinear Materials and Yield Behavior.
  Michigan Technological University, Houghton, MI, 2006.
• Amirkhizi, Alireza V.:
  Multifunctional Composites and Structures with Integrated Mechanical and Electromagnetic Properties.
  UCSD, La Jolla, CA, 2006.
• Basavanahalli, Raghuram:
  Finite Element Modeling of Carbon Nanotube Reinforced Polymer Composites and Evaluating its Thermal Conductivities.
  University of Texas at Arlington, Arlington, TX, 2006.
• Bayreuther, Claus:
  Mehrskalenmodelle in der Festkörpermechanik und Kopplung von Mehrgittermethoden mit Homogenisierungsverfahren.
  Universität Stuttgart, Germany, 2006.
• Ben Bettaieb, Mohamed:
  Modélisation du comportement de matériaux polycristallins par homogénéisation périodique.
  Université de la Méditerranée, Marseille, France, 2006.
• Bertoldi, Katia:
  Non-Local Structural Interfaces.
  Università degli Studi di Trento, Italy, 2006.
• Dayal, Kaushik:
  Nonlocal Microstructural Mechanics of Active Materials.
  California Institute of Technology, Pasadena, CA, 2006.
• Dray Bensahkoun, Delphine:
  Prédiction des propriétés thermo-élastiques d'un composite injecté et chargé de fibres courtes.
  ENSAM, Paris, France, 2006.
• Du, Xiangdong:
  Scaling Laws in Thermomechanics and Permeability of Random Media.
  McGill University, Montreal, PQ, Canada, 2006.
• Ferrante, Fernando J.:
  A Probabilistic Micromechanical-Based Approach to the Analysis of Statistically Inhomogeneous Random Media.
  Johns Hopkins University, Baltimore, MD, 2006.
• Germain, Norbert:
  Modélisation non locale de l'endommagement dans les structures composites.
  ENSMP, Evry, France, 2006.
• Gitman, Inna M.:
  Representative Volumes and Multi-Scale Modelling of Quasi-Brittle Materials.
  TU Delft, The Netherlands, 2006.
• Haberman, Michael R.:
  Vers la conception des matériaux amortissants: Une approche micromécanique.
  Université de Metz, France, 2006.
• Huang, Yun:
  Computational Modeling of Viscoelastic Composites and Porous Materials.
  University of Minnesota, Minneapolis, MN, 2006.
• Idiart, Martin I.:
  Macroscopic Behavior and Field Fluctuations in Non Linear Composite Materials.
  Ecole Polytechnique, Palaiseau, France, 2006.
• Jack, David A.:
  Advanced Analysis of Short-Fiber Polymer Composite Material Behavior.
  University of Missouri-Columbia, MO, 2006.
• Jouneid, Fadi:
  Modélisation probabiliste du flambement des matériaux cellulaires à microstructure aléatoire. Application aux mousses.
  ENPC Marne-la-Vallée, Champs sur Marne, France, 2006.
• Kari, Sreedhar:
  Micromechanical Modelling and Numerical Homogenization of Fibre and Particle Reinforced Composites.
  Universität Magdeburg, Germany, 2006.
• Lee, Seon-Jae:
  Micromechanical Model for Predicting the Fracture Toughness of Functionally Graded Foams.
  University of Florida, Gainesville, FL, 2006.
• Li, Hao:
  Mechanical Behavior of Metallic Glasses and Metallic Glass Matrix Composites.
  Michigan Technological University, Houghton, MI, 2006.
• Li, Huanlong:
  Modeling and Simulation of Microporous Titanium: Effects of Morphology with Application to Orthopaedic Implants.
  Northwestern University, Evanston, IL, 2006.}
• Li, Shanhu:
  Extended Voronoi Cell Finite Element Model for Damage in Brittle Matrix Composites.
  Ohio State University, Columbus, OH, 2006.
• Liu, Liping:
  Multiscale Analysis and Modeling of Magnetostrictive Composites.
  University of Minnesota, Minneapolis, MN, 2006.
• Liu, Wenjie:
  A Multiscale Hybrid Method for Materials Containing Defects and Inhomogeneities.
  Kansas State University, Manhattan, KS, 2006.
• Lopez-Pamires, Oscar:
  On the Effective Behavior, Microstructure Evolution, and Macroscopic Stability of Elastomeric Composites.
  Ecole Polytechnique, Palaiseau, France, 2006.
• Luxner, Mathias H.:
  Modeling and Simulation of Highly Porous Open Cell Structures - Elasto-Plasticity and Localization versus Disorder and Defects.
  TU Wien, Vienna, Austria, 2006.
• Moftah, Salem O.:
  Computational Homogenization of Concrete.
  Universität Hannover, Germany, 2006.
• Ng, Ernest T.Y.N.:
  Elastoplastic Modeling of Multi-Phase Fiber-Reinforced Composites with Void Growth Using Transformation Field Analysis and the Governing Parameter Method.
  University of Victoria, BC, 2006.
• Ouaar, Amine:
  Micromechanics of Rate-Independent Multi-Phase Composites: Application to Steel Fiber-Reinforced Concrete.
  Université Catholique de Louvain, Belgium, 2006.
• Petersen, Richard C.:
  Micromechanics for Fiber-Reinforced Photocure Composites.
  University of Alabama at Birmingham, Birmingham, AL, 2006.
• Pierard, Olivier:
  Micromechanics of Inclusion-Reinforced Composites in Elasto-Plasticity: Modeling and Computation.
  Université Catholique de Louvain, Belgium, 2006.
• Prokopiev, Oleg:
  Effect of Microstructure on the Mechanical Properties of Porous Solids.
  New Mexico State University, Las Cruces, NM, 2006.
• Rekik, Amna:
  Une méthodologie pour une évaluation précise des procédures de linéarisation en homogénéisation non linéaire.
  Ecole Polytechnique, Palaiseau, France, 2006.
• Sadraie, Hamid Reza:
  A Boundary Spectral Method for Elasticity Problems with Spherical Inhomogeneities.
  University of Minnesota, Minneapolis, MN, 2006.
• Temizer, Ilker:
  Homogenization in Linear and Nonlinear Elasticity.
  UCB, Berkeley, CA, 2006.
• Tiwary, Abhijeet:
  Numerical Conformal Mapping Method Based Micromechanical Voronoi Cell Finite Element Model for Arbitrary Shaped Heterogeneities.
  Ohio State University, Columbus, OH, 2006.
• Tomková, Blanka:
  Modelling of Thermophysical Properties of Woven Composites.
  TU Liberec, Czech Republic, 2006.
• Vernerey, Franck J.:
  Multi-Scale Continuum Theory for Microstructured Materials.
  Northwestern University, Evanston, IL, 2006.
• Yue, Weimin:
  Micromechanical Model of Hydroxyapatite Whisker Reinforced Polymer Composites and Cortical Bone Tissue.
  University of Notre Dame, Notre Dame, IN, 2006.
• Zhu, Linfa:
  Multiscale High Strain Rate Models for Polymer Matrix Composites.
  Arizona State University, Tempe, AZ, 2006.
  [Top]

2007

• Auslender, François:
  Contribution à la modélisation des matériaux hétérogènes.
  Mémoire HDR, Université Blaise Pascal, Clermont-Ferrand, France, 2007.
• Biragoni, Praveen G.:
  Modelling the Influence of Microstructure on Elastic Properties and Tensile Damage Behaviour of Mo-Base Silicide Alloys.
  Universität Magdeburg, Germany, 2007.
• Dang, Thi D.:
  Meshless Local Petrov-Galerkin Micromechanical Analysis of Structural Composites.
  University of Florida, Gainesville, FL, 2007.
• Decad, Dror:
  Micromechanics-Based Modeling of Woven Composite Materials.
  Tel Aviv University, Tel Aviv, Israel, 2007.
• Ekneligoda, Thushan C.:
  Estimation of the Elastic Moduli of Porous Materials using Analytical Methods, Numerical Methods and Image Analysis.
  KTH, Stockholm, Sweden, 2007.
• Friebel, Christophe:
  Mechanics and Acoustics of Viscoelastic Inclusion Reinforced Composites: Micro-Macro Modeling of Effective Properties.
  Université Catholique de Louvain, Belgium, 2007.
• Göktepe, Serdar:
  Micro-Macro Approaches to Rubbery and Glassy Polymers: Predictive Micromechanically-Based Models and Simulations.
  Universität Stuttgart, Germany, 2007.
• Graff, Stéphane:
  Micromechanical Modeling of the Deformation of HCP Metals.
  TU Berlin, Germany, 2007.
• Haberman, Michael R.:
  Design of High Loss Viscoelastic Composites through Micromechanical Modeling and Decision Based Materials Design.
  Georgia Institute of Technology, Atlanta, GA, 2007.
• Hettich, Thomas M.:
  Diskontinuierliche Modellierung zur Versagensanalyse von Verbundmaterialien.
  Universität Stuttgart, Germany, 2007.
• Hund, Andrea S.:
  Hierarchische Mehrskalenmodellierung des Versagens von Werkstoffen mit Mikrostruktur.
  Universität Stuttgart, Germany, 2007.
• Jones, Gareth W.:
  Static Elastic Properties of Composite Materials Containing Microspheres.
  University of Oxford, UK, 2007.
• Kabel, Matthias:
  Numerische Lösung der stationären Diffusionsgleichung mit Homogenisierungsmethoden.
  Universität Hamburg, Germany, 2007.
• Khisaeva, Zemfira F.:
  Scaling Laws in Generalized Thermoelasticity and Finite Elasticity.
  McGill University, Montreal, PQ, Canada, 2007.
• Kurzhöfer, Ingo:
  Mehrskalen-Modellierung polykristalliner Ferroelektrika basierened auf diskreten Orientierungsverteilungsfunktionen.
  Universität Duisburg-Essen, Germany, 2007.
• Lillbacka, Robert:
  On the Multiscale Modeling of Duplex Stainless Steel.
  Chalmers University of Technology, Göteborg, Sweden, 2007.
• Lombardo, Nick:
  Properties of Composites Containing Spherical Inclusions Surrounded by an Inhomogeneous Interphase Region.
  RMIT University, Melbourne, Australia, 2007.
• Maligno, Angelo R.:
  Finite Element Investigations on the Microstructure of Composite Materials.
  University of Nottingham, UK, 2007.
• Missoum-Benziane, Djamel:
  Nouvelle approche pour la modélisation des problèmes multi-échelles en mécanique: La méthode 95/5.
  ENSAM, Paris, France, 2007.
• Müller, Randoald:
  Tensile Behaviour of Discontinuous Two-Phase Materials: Influence of Matrix Flow Stress and Internal Damage.
  EPFL, Lausanne, Switzerland, 2007.
• Pinho da Cruz, Alexandre M.:
  Caracterização Termomecânica de Materiais Multifásicos Utilizando Procedimentos de Homogeneização.
  Universidade de Aveiro, Portugal, 2007.
• Seidel, Gary D.:
  Micromechanics Modeling of the Multifunctional Nature of Carbon Nanotube-Polymer Nanocomposites.
  Texas A&M University, College Station, TX, 2007.
• Smaoui Barbouri, Salma:
  Modélisation micromécanique du comportement de milieux poreux non linéaires: Applications aux argiles compacté.
  Université Pierre et Marie Curie, Paris, France, 2007.
• Tekoglu, Cihan:
  Size Effects in Cellular Solids.
  Rijksuniversiteit Groningen, The Netherlands, 2007.
• Vincent, Pierre-Guy:
  Modélisation micromécanique de la croissance et de la percolation de pores pressurisés dans une matrice céramique à haute température.
  Université de Provence, Marseille, France, 2007.
• Wang, Junqiang:
  Fracture Toughness Of Cellular Materials Using Finite Element Based Micromechanics.
  University of Florida, Gainesville, FL, 2007.
• Weck, Arnaud G.:
  The Role of Coalescence on Ductile Fracture.
  McMaster University, Hamilton, ON, Canada, 2007.
• Willot, François:
  Contribution à l'étude théorique de la localisation plastique dans les poreux.
  Ecole Polytechnique, Palaiseau, France, 2007.
  [Top]

2008

• Bai, Jie:
  A Homogenization Based Continuum Plasticity-Damage Model for Ductile Fracture of Materials Containing Heterogeneities.
  Ohio State University, Columbus, OH, 2008.
• Danas, Konstantinos:
  Homogenization-Based Constitutive Models for Viscoplastic Porous Media with Evolving Microstructure.
  Ecole Polytechnique, Palaiseau, France, 2008.
• Delincé, Marc:
  Micromechanics of Strength and Strain Hardening in Mono- and Multiphase Fine Grained Materials.
  Université Catholique de Louvain, Belgium, 2008.
• Drago, Anthony S.:
  Locally-Exact Homogenization Theory for Periodic Materials with Unidirectional Reinforcements.
  University of Virginia, Charlottesville, VA, 2008.
• Franz, Gérald:
  Prédiction de a limite de formabilité des aciers multiphases par une approche micromécanique.
  ENSAM Paris, France, 2008.
• Gu, Shui-Tao:
  Contributions à la modélisation des interfaces imparfaites et à l'homogénéisation des matériaux hétérogènes.
  Université Paris Est, France, 2008.
• Hård af Segerstad, Per:
  Nonlinear Micromechanics of Open-Cell Cellular Solids.
  Chalmers University of Technology, Göteborg, Sweden, 2008.
• Hu, Chao:
  Locally Enhanced Voronoi Cell Finite Element Model (LE-VCFEM) for Ductile Fracture in Heterogeneous Cast Aluminium Alloys.
  Ohio State University, Columbus, OH, 2008.
• Huber, Christopher O.:
  Numerical Simulations of Metal Matrix Composites - Tribological Behavior and Finite Strain Response on Different Length Scales.
  TU Wien, Vienna, Austria, 2008.
• Ilic, Sandra:
  Application of the Multiscale FEM to the Modeling of Composite Materials.
  Ruhr-Universität Bochum, Germany, 2008.
• Jylhä, Liisi:
  Modeling of Electric Properties of Composites.
  Helsinki University of Technology, Espoo, Finland, 2008.
• Landervik, Mats:
  Modeling of Foams for Impact Simulations.
  Chalmers University of Technology, Göteborg, Sweden, 2008.
• Li, Wei:
  Yield and Geodesic Properties of Random Elasto-Plastic Materials.
  McGill University, Montreal, PQ, Canada, 2008.
• Marklund, Erik:
  Modeling the Mechanical Performance of Natural Fiber Composites.
  Luleå Tekniska Universitet, Sweden, 2008.
• Nogales, Sergio:
  Numerical Simulation of the Thermal and Thermomechanical Behavior of Metal Matrix Composites.
  TU Wien, Vienna, Austria, 2008.
• Ruijter, Wout:
  Analysis of Mechanical Properties of Woven Textile Composites as a Function of Textile Geometry. University of Nottingham, UK, 2008.
• Scheyvaerts, Florence:
  Multiscale Modelling of Ductile Fracture in Heterogeneous Metallic Alloys.
  Université Catholique de Louvain, Belgium, 2008.
• Sreeranganathan, Arun:
  Realistic Micromechanical Modeling and Simulation of Two-Phase Heterogeneous Materials.
  Georgia Institute of Technology, Atlanta, GA, 2008.
• Suwatnodom, Prechaporn:
  Three-Dimensional Micromechanical Damage Models, Fiber Pullout Models and Fracture Toughness of Discontinuous Steel Fiber Reinforced Cementitious Composites.
  UCLA, Los Angeles, CA, 2008.
• Tang, Tian:
  Variational Asymptotic Micromechanics Modeling of Composite Materials.
  Utah State University, Logan, UT, 2008.
• Tjahjanto, Denny D.:
  Micromechanical Modeling and Simulations of Transformation-Induced Plasticity in Multiphase Carbon Steels.
  TU Delft, The Netherlands, 2008.
  [Top]

2009

• Acton, Katherine:
  Modeling Elasto-Plastic Composite Material Behavior by Meso-Scale Homogenization.
  Johns Hopkins University, Baltimore, MD, 2009.
• Al Kassem, Ghayath:
  Computational Approach for the Development of Micromechanical Material Models for Polymer Composites through Numerical Simulation Techniques.
  RWTH Aachen, Germany, 2009.
• Anghelescu, Mihnea S.:
  Thermal and Mechanical Analysis of Carbon Foam.
  Ohio University, Athens, OH, 2009.
• Barretta, Annalisa:
  Nonlinear Homogenization.
  Università Napoli Federico II, Naples, Italy, 2009.
• Bartel, Thorsten:
  Multiskalenmodellierung martensitischer Phasentransformationen in Formgedächtnislegierungen unter Verwendung relaxierter Energiepotenziale.
  Ruhr-Universität Bochum, Germany, 2009.
• Beeri, Guy:
  Some Mathematical, Numerical and Engineering Aspects of Composite Structures and Perforated Solids.
  Luleå Tekniska Universitet, Sweden, 2009.
• Cauvin, Ludovic:
  Etude expérimentale et modélisation micromécanique du comportement de nanocomposites à renforts plaquettaires.
  Université des Sciences et Technologies de Lille, France, 2009.
• Chen, Grace:
  Multiscale Modeling of Shape Memory Alloys and NiTi Foams.
  Northwestern University, Evanston, IL, 2009.
• Ernst, Gerald:
  Multiscale Analysis of Textile Composites - Stiffness and Strength.
  Universität Hannover, Germany, 2009.
• Fritsch, Andreas:
  Multiscale Explanation of Elasticity and Strength of Bone and Bone Replacement Materials Made of Hydroxyapatite, Glass-Ceramics, or Titanium: A Continuum Micromechanics Approach.
  TU Wien, Vienna, Austria, 2009.
• Giusti, Sebastián M.:
  Análise de sensibilidade topológica em modelos constitutivos multi-escalas.
  LNCC, Petrópolis, Brazil, 2009.
• Hauert, Aude:
  Damage Propagation and Fracture in Highly Reinforced Particulate Metal Matrix Composites.
  EPFL, Lausanne, Switzerland, 2009.
• Jain, Jayesh R.:
  Homogenization Based Damage Models for Monotonic and Cyclic Loading in 3D Composite Materials.
  Ohio State University, Columbus, OH, 2009.
• Jean, Aurélie:
  Etude d'un élastomère chargé, de la nanostructure au macro-comportement.
  Mines ParisTech, France, 2009.
• Kim, Jeong Sik:
  A Micromechanical Model for Viscoelastic and Viscoplastic Responses of Particle Reinforced Composites.
  Texas A&M University, College Station, TX, 2009.
• Kulkarni, Mohan G.:
  Multi-Scale Cohesive Failure Modeling of Heterogeneous Adhesives.
  University of Illinois at Urbana-Champaign, Urbana, IL, 2009.
• Kurnatowski, Benjamin:
  Zweiskalensimulation von mikroheterogenen Strukturen aus spröden Faserverbundwerkstoffen.
  Universität Kassel, Germany, 2009.
• Lu, Liwei:
  Modeling the Mechanical Response of Fibrous Monolith Composites.
  University of Maryland Baltimore County, Baltimore, MD, 2009.
• Moraleda Palmero, Joaquín:
  Micromecánica de elastómeros porosos y reforzados con fibras.
  Universidad Politécnica de Madrid, Spain, 2009.
• Özdemir, Izzet:
  Multi-Scale Modelling of Thermal Shock Damage in Refractory Materials.
  TU Eindhoven, The Netherlands, 2009.
• Parenteau, Thomas:
  Modélisation micromécanique de composites thermoplastiques élastomères à matrice polypropylène.
  Université de Bretagne Sud, Brest, France, 2009.
• Prakash, Aruna:
  Computational Micromechanics of Polycrystals: Special Emphasis on Twinning and Recrystallization in Mg Alloys and TWIP Steels.
  KIT, Karlsruhe, Germany, 2009.
• Ranganathan, Shivakumar I.:
  Scale-Dependent Homogenization and Scaling Laws in Random Polycrystals.
  University of Illinois at Urbana-Champaign, Urbana, IL, 2009.
• Valiveti, Dakshina M.:
  Integrated Multiscale Characterization and Modeling of Ductile Fracture in Heterogeneous Aluminum.
  Ohio State University, Columbus, OH, 2009.
• Vorel, Jan:
  Multi-Scale Modeling of Composite Materials.
  CTU, Prague, Czech Republic, 2009.
• Yanase, Keiji:
  Micromechanics and Effective Thermo-Mechanical Damage and Deformation Responses of Composite Materials.
  UCLA, Los Angeles, CA, 2009.
  [Top]

2010

• Agoras, Michalis:
  On Macroscopic Constitutive Relations and Microstructure Evolution in Multi-Scale Viscoplastic Composites.
  University of Pennsylvania, Philadelphia, PA, 2010.
• Alexanderian, Alen:
  Random Composit Media: Homogenization, Modeling, Simulation, and Material Symmetry.
  University of Maryland Baltimore County, Baltimore, MD, 2010.
• Bachiega de Araucho, Bruno F.:
  Numerical and Analytical Verification of a Multiscale Computational Model for Impact Problems in Heterogeneous Viscoelastic Materials with Evolving Damage.
  University of Nebraska - Lincoln, NE, 2010.
• Goupee, Andrew J.:
  Multiscale Investigation of Random Heterogeneous Media in Materials and Earth Sciences.
  University of Maine, Orono, ME, 2010.
• Jänicke, Ralf:
  Micromorphic Media: Interpretation by Homogenisation.
  Universität des Saarlandes, Saarbrücken, Germany, 2010.
• Klusemann, Benjamin:
  Application of Homogenization Methods and Crystal Plasticity to the Modeling of Heterogeneous Materials of Technological Interest.
  TU Dortmund, Germany, 2010.
• Ma, Hemei:
  Solutions of Eshelby-Type Inclusion Problems and a Related Homogenization Method Based on a Simplified Strain Gradient Elasticity Theory.
  Texas A&M University, College Station, TX, 2010.
• Magalhães, Laurence C.:
  A Influência dos parâmetros construtivos no compartamento mecânico de peças fabricadas pela técnica de modelagem por fusão e desposição (FDM).
  Universidade Tecnológica Federal do Paraná, Curitiba, Brasil, 2010.
• Mercatoris, Benoît:
  Multi-Scale Modelling of Shell Failure for Periodic Quasi-Brittle Materials.
  Université Libre de Bruxelles, Belgium, 2010.
• Mseis, George:
  Multiscale Modeling and Homogenization of Composite Materials.
  University of California, Berkeley, CA, 2010.
• Notarberardino, Bruno:
  Image Based Finite Element Modelling for the Mechanical Characterisation of Complex Material Systems.
  University of Exeter, UK, 2010.
• Pan, Yi.:
  Stiffness and Progressive Damage Analysis on Random Chopped Fiber Composite Using FEM.
  Rutgers University, New Brunswick, NJ, 2010.
• Peyrega, Charles.:
  Prediction of the Acoustic Properties of Heterogeneous Fibrous Materials from Their 3D Microstructures.
  Mines ParisTech, France, 2010.
• Schwarzer, Daniel:
  Stochastische und mehrskalige Modellierung der Strukturdynamik von Metallschäumen.
  Universität Karlsruhe, Germany, 2010.
• Schwen, Lars O.:
  Composite Finite Elements for Trabecular Bone Microstructures.
  Rheinische Friedrich-Wilhelms-Universität Bonn, Germany, 2010.
• Zahr Viñuela, Jorge Alonso:
  Comportamiento mecánico de materiales compuestos de matriz metálica y refuerzo de partículas: un enfoque basado en celdas multipartícula.
  Universidad Carlos III, Madrid, Spain, 2010.
• Zhou, Zhiqiang:
  Multiple-Scale Numerical Analysis of Composites Based on Augmented Finite Element Method.
  University of Miami, FL, 2010.
  [Top]

2011

• Altendorf, Hellen:
  3D Morphological Analysis and Modeling of Random Fiber Networks.
  TU Kaiserslautern, Kaiserslautern, Germany, 2011.
• Brassart, Laurence:
  Homogenization of Elasto- (Visco)Plastic Composites: History Dependent Incremental and Variational Approaches.
  Université Catholique de Louvain, Belgium, 2011.
• Brisard, Sébastien:
  Analyse morphologique et homogénéisation numériques.
  Université Paris-Est, Marne-la-Vallée, France, 2005.
• Canal, Luis P.:
  Experimental and Computational Micromechanical Study of Fiber Reinforced Polymers.
  Universidad Politécnica de Madrid, Spain, 2011.
• Fritzen, Felix:
  Microstructural Modeling and Computational Homogenization of the Physically Linear and Nonlinear Constitutive Behavior of Micro-Heterogeneous Materials.
  KIT, Karlsruhe, Germany, 2011.
• Gunel, Eray M.:
  Large Deformation Micromechanics of Particle Filled Acrylics at Elevated Temperatures.
  SUNY, Buffalo, NY, 2011.
• Hitti, Karim:
  Direct Numerical Simulation of Complex Representative Volume Elements (RVEs): Generation, Resolution and Homogenization.
  Mines ParisTech, France, 2011.
• Hoang, Duc H.:
  Contribution à l'homogénéisation de matériaux hétérogènes viscoélastiques. Milieux aléatoires et périodiques et prise en compte des interfaces.
  Université Paris Est, Marne-la-Valée, France, 2011.
• Johnson, Shane M.:
  Computational Modeling, Stochastic and Experimental Analysis with Thermoelastic Stress Analysis for Fiber Reinforced Polymeric Composite Systems.
  Georgia Institute of Technology, Atlanta, GA, 2011.
• Kammoun, Slim:
  Micromechanics Modeling of the Progressive Failure in Short Glass-Fiber Reinforced Thermoplastics.
  Université Catholique de Louvain, Belgium, 2011.
• Kamran, Ahmed K.:
  A Multiscale Model for Coupled Heat Conduction and Deformations of Viscoelastic Composites.
  Texas A&M University, College Station, TX, 2011.
• Kapfer, Sebastian:
  Morphometry and Physics of Particulate and Porous Media.
  Universität Erlangen–Nürnberg, Germany, 2011.
• Kröner, Carsten:
  Beschreibung des Kriechverhaltens kurzfaserverstärkter Komposite aus den Eigenschaften der Konstituenten.
  Martin-Luther-Universität Halle-Wittenberg, Germany, 2011.
• Kumar, Himanshu:
  A Combined X-FEM and Level Set Approach for Modeling Composite Material's Micro Structure.
  University of Texas at El Paso, TX, 2011.
• Liu, Kuang:
  Micromechanics Based Multiscale Modeling of the Inelastic Response of Complex Architecture Composites.
  Arizona State University, Tempe, AZ, 2011.
• Liu, Mengqi:
  Strain Gradient Solutions of Eshelby-Type Problems for Polygonal and Polyhedral Inclusions.
  Texas A&M University, College Station, TX, 2011.
• Lutif, Jamilla:
  Computational Micromechanics Modeling of Damage-Dependent Bituminous Composites Based on Two-Way Coupled Multiscale Approach.
  University of Nebraska - Lincoln, NE, 2011.
• Ma, Hemei:
  Solutions of Eshelby-Type Inclusion Problems and a Related Homogenization Method Based on a Simplified Strain Gradient Elasticity Theory.
  Texas A&M University, College Station, TX, 2011.
• Miled, Bilel:
  Coupled Viscoelastic-Viscoplastic Modeling of Homogeneous and Reinforced Thermoplastic Polymers.
  Université Catholique de Louvain, Belgium, 2011.
• Nehme, Samer:
  Contribution á l'approche numérique multi-échelles pour la modélisation du comportement mécanique de matériaux composites à renfort interlock.
  Université de Technologie de Compiègne, France, 2011.
• Othmani, Yamen:
  Micro-Macro Modeling of Debonding in Inclusion Reinforced Elastic Composite Materials.
  Université Catholique de Louvain, Belgium, 2011.
• Paquet, Daniel:
  Adaptive Multi-Level Model for Multi-Scale Ductile Fracture Analysis in Heterogeneous Aluminum Alloys.
  Ohio State University, Columbus, OH, 2011.
• Rasool, Azra:
  Improved Multi-Particle Unit Cell Models for Studying Particle Reinforced Composites.
  TU Wien, Vienna, Austria, 2011.
• Reina Romo, Celia:
  Multiscale Modeling and Simulation of Damage by Void Nucleation and Growth.
  Caltech, Pasadena, CA, 2011.
• Rohan, Eduard:
  Homogenization of Strongly Heterogeneous Porous Media.
  University of West Bohemia, Plžen, Czech Republic, 2011.
• Rudraraju, Krishna S.S.:
  On the Theory and Numerical Simulation of Cohesive Crack Propagation with Application to Fiber Reinforced Composites.
  University of Michigan, Ann Arbor, MI, 2011.
• Salit, Victor:
  Some Contributions to the Homogenization of Macroscopically Isotropic Composites.
  TU Darmstadt, Germany, 2011.
• Sehlhorst, Hans-Georg:
  Numerical Homogenization Strategies for Cellular Materials with Applications in Structural Mechanics.
  TU Hamburg-Harburg, Germany, 2011.
• Snipes, Jennifer S.:
  Nano-Micromechanics: Modeling the Effective Response of Polymer Nanocomposites.
  University of South Carolina, Columbia, SC, 2011.
• Vaughan, Ted:
  Micromechanical Modelling of Damage and Failure in Fibre Reinforced Composites under Loading in the Transverse Plane.
  University of Limerick, Ireland, 2011.
• Yu, Jaesang:
  Micromechanically Based Multiscale Material Modeling of Polymer Nanocomposites.
  Mississippi State University, Mississippi State, MS, 2011.
  [Top]

2012

• Badillo Alamarz, Hiram:
  Numerical Modelling Based on the Multiscale Homogenization Theory. Application in Composite Materials and Structures.
  Universitat Politècnica de Catalunya, Barcelona, Spain, 2012.
• Coenen, Erica W.C.:
  Multi-Scale Modelling of Damage and Fracture.
  TU Eindhoven, The Netherlands, 2012.
• Crouch, Robert D.:
  Multiscale Modeling of Brittle Composites Using Reduced Order Computational Homogenization.
  Vanderbilt University, Nashville, TN, 2012.
• Czech, Christopher:
  Design of Meta-Materials Outside the Homogenization Limit Using Multiscale Analysis and Topology Optimization.
  Clemson University, Clemson, SC, 2012.
• Dirrenberger, Justin:
  Effective Properties of Architectured Materials.
  Mines ParisTech, France, 2012.
• Hoffmann, Sven:
  Computational Homogenization of Short Fiber Reinforced Thermoplastic Materials.
  TU Kaiserslautern, Germany, 2012.
• Jöchen, Katja:
  Homogenization of the Linear and Non-Linear Mechanical Behavior of Polycrystals.
  KIT, Karlsruhe, Germany, 2012.
• Kong, Juan:
  Anelastic Behavior and Diffraction Modeling of Silicon Carbide Whisker Reinforced Alumina.
  McMaster University, Hamilton, ON, Canada, 2012.
• Kuznetsov, Sergey:
  Homogenization Methods for Problems with Multiphysics, Temporal and Spatial Coupling.
  Columbia University, New York, NY, 2012.
• Largenton, Rodrigue:
  Modélisation du comportement effective du combustible MOX par une analyse micro-mécanique en champs de transformation non uniformes.
  Université de Provence, Marseille, France, 2012.
• Linder, Christian:
  On the Computational Modeling of Micromechanical Phenomena in Solid Materials.
  Universität Stuttgart, Germany, 2012.
• Majunatha, Preetham Aghalaya:
  Homogenization Procedures for the Constitutive Material Modeling and Analysis of Aperiodic Microstructures.
  University of Southern California, Los Angeles, CA, 2012.
• Mangipudi, Kodanda R.:
  Multiscale Modeling of Deformation and Fracture in Metal Foams.
  Rijksuniversiteit Groningen, The Netherlands, 2012.
• Mihai, Iulia:
  Micromechanical Constitutive Models for Cementitious Composite Materials.
  Cardiff University, UK, 2012.
• Richter, Dirk H.:
  Multiscale Homogenization of Ceramic Composites with Porous Matrix Phase.
  Ruhr-Universität Bochum, Germany, 2012.
• Salmi, Moncef:
  Homogénéisation des composites linéaires: Etude des comportements apparents et effectif.
  Université Clermont-Ferrand 2, France, 2012.
• Schneider, Benjamin J.:
  Polygonale Diskrete Elemente zur Modellierung heterogener Materialien.
  Universität Stuttgart, Germany, 2012.
• Schrader, Kai:
  Hybrid 3D Simulation Methods for the Damage Analysis of Multiphase Composites.
  Bauhaus Universität Weimar, Germany, 2012.
• Sena, Michael P.:
  Mesoscale Random Fields of Stiffness for In-Plane Elasticity.
  University of Illinois at Urbana-Champaign, Urbana, IL, 2012.
• Shi, Xiaohao:
  Mechanical Modelling of Composites with Reinforcements in Finite Deformation.
  Newcastle University, UK, 2012.
• Su, Fang:
  Computational Homogenization of Transient Problems - Application to Porous Media.
  Chalmers University of Technology, Göteborg, Sweden, 2012.
• Tagliavia, Gabriele:
  Micromechanics of Syntactic Foams: Viscoelastic Behavior, Elastic Properties, Mechanics of Debonding, and Moisture Diffusion.
  Polytechnic Institute of New York University, Brooklyn, NY, 2012.
• Taxer, Thomas M.:
  Finite Element Simulation of Nickel-Base Superalloys on Multiple Length Scales.
  TU München, Germany, 2012.
• Todt, Melanie:
  Continuum Shell Models for Multi-Layer Carbon Nanostructures.
  TU Wien, Vienna, Austria, 2012.
• Zhang, Pan:
  A Virtual Grain Structure Representation System for Micromechanics Simulation.
  Imperial College, London, UK, 2012.
  [Top]

2013

• Alsayednoor, Jafar:
  Modelling and Characterisation of Porous Materials.
  University of Glasgow, 2013.
• Bond, Michael D.:
  Multiscale Modelling of Discontinuous Carbon Fibre Reinforced Composites.
  University of Nottingham, UK, 2013.
• Cheng, Feifei:
  Multiscale Computational Modeling of Multiphase Composites with Damage.
  Texas A&M University, College Station, TX, 2013.
• Dong, Leiting:
  Treffz Voronoi Cells and SGBEM Super Elements - Towars an Efficient and Accurate Modeling of Inhomogeneities and Defects in Solids.
  University of California, Irvine, CA, 2013.
• Drach, Borys:
  Multiscale Numerical Modeling and Characterization of Carbon/Carbon Composites.
  University of New Hampshire, Durham, NH, 2013.
• Gager, Jakob:
  Modeling and Simulation Concepts for Advanced Braided Composites.
  TU Wien, Vienna, Austria, 2013.
• Hasenhütl, Eva:
  Ein Einheitszellenmodell zur Beschreibung von transformationsinduzierter Plastizität.
  Montanuniversität Leoben, Austria, 2013.
• Jeon, Jaehyeuk:
  A Viscoelastic-Viscoplastic Analysis of Fiber-Reinforced Polymer Composites Undergoing Mechanical Loading and Temperature Changes.
  Texas A&M University, College Station, TX, 2013.
• Jeromin, Nikolaus:
  Homogenisierungsansätze füur elasto-plastische Festkörper auf Basis inkrementeller Variationsprinzipien.
  TU Dortmund, Germany, 2013.
• Johnson, Joseph:
  Numerical Modeling and Characterization of Vertically Aligned Carbon Nanotube Arrays.
  University of Kentucky, Lexington, KY, 2013.
• Kaiser, Jan-Martin:
  Beitrag zur mikromechanischen Berechnung kurzfaserverstärkter Kunststoffe - Deformation und Versagen.
  Universität des Saarlandes, Saarbrücken, Germany, 2013.
• Kundalwal, Sailesh I.:
  Micromechanical Analysis of Novel Continuous and Short Fuzzy Fiber Reinforced Composites.
  Indian Institute of Technology, Kharagpur, India, 2013.
• Lehmann, Eva:
  Computational Homogenization of Polycrystalline Elastoplastic Microstructures at Finite Deformation.
  Universität Hannover, Germany, 2013.
• Moos, Christoph:
  An Algorithm for Damage Mechanics Based on the Fast Fourier Transform.
  Ruhr-Universität Bochum, Germany, 2013.
• Moussaddy, Hadi:
  A New Definition of the Representative Volume Element in Numerical Homogenization Problems and its Application to the Performance Evaluation of Analytical Homogenization Models.
  Ecole Polytechnique de Montréal, Montréal, PQ, Canada, 2013.
• Paiboon, Jumpol:
  Numerical Analysis of Homogenization Using Random Finite Element Method.
  Colorado School of Mines, Golden, CO, 2013.
• Qian, Connie C.:
  Structural Optimisation of Discontinuous Carbon Fibre Composites.
  University of Nottingham, UK, 2013.
• Sanden, Matthias:
  Mathematische Homogenisierung in der Kontinuumsmechanik.
  TU Darmstadt, Germany, 2013.
• Spathapalli, Thanuj S.:
  Semi-Analytical Approach to Obtain Physical Fields in Heterogeneous Materials.
  University of Texas at Arlington, TX, 2013.
• Willoughby, Natasha J.:
  Dynamic Homogenization for the Elastic Properties of Periodic and Random Composites.
  University of Manchester, UK, 2013.
• Vondrejc, Jaroslav:
  FFT-Based Method for Homogenization of Periodic Media: Theory and Applications.
  CTU, Prague, Czech Republic, 2013.
• Wu, Yi:
  Micromechanical Damage Models for Continuous Fiber Reinforced Composite Materials.
  UCLA, Los Angeles, CA, 2013.
• Ye, Zheng:
  Enhance Variational Asymptotic Method for Unit Cell Homogenization (VAMUCH) for Real Engineering Structures and Materials.
  Utah State University, Logan, UT, 2013.
  [Top]

2014

• Avazmohammadi, Reza:
  Overall Mechanical Response of Soft Composite Materials with Particulate Microstructure at Finite Strains.
  University of Pennsylvania, Philadelphia, PA, 2014.
• Bauer, Sebastian:
  Two-Step Determination of Strength Evolution of Heterogeneous Materials Controlled by Endo- or Exothermal Chemical Reactions.
  Universität Innsbruck, Austria, 2014.
• Coradi, Audrey:
  Modélisation du comportement mécanique des composites à matrice céramique.
  Université de Bordeaux, France, 2014.
• Feng, Chuang:
  Micromechanics Modeling of the Electrical Conductivity of Carbon Nanotube (CNT)-Polymer Nanocomposites.
  University of Western Ontario, London, ON, 2014.
• George, Tochukwu:
  Carbon Fiber Composite Cellular Structures.
  University of Virginia, Charlottesville, VA, 2014.
• Geringer, Alexander:
  Macroscopic Modeling of Open-Cell Foams: An Order Parameter Approach.
  Universität des Saarlandes, Saarbrücken, Germany, 2014.
• Ghossein, Elias:
  Numerical Validation of Analytical Homogenization Models for the Case of Randomly Distributed and Oriented Ellipsoidal Fibers Reinforced Composites.
  Ecole Polytechnique de Montréal, Montréal, PQ, Canada, 2014.
• Gurumurthy, Ashok:
  Simulation Methodologies for Three-Dimensional Microstructures.
  Georgia Institute of Technology, Atlanta, GA, 2014.
• Iltchev, Alexandre:
  Homogénéisation périodique d'un matériau cellulaire en élasto-plasticité et application au calcul de structures: des petites aux grandes déformations.
  Mines ParisTech, France, 2014.
• Inglis, Helen M.:
  Modeling the Effect of Debonding on the Constitutive Response of Heterogeneous Materials.
  University of Illinois at Urbana-Champaign, Urbana, IL, 2014.
• Khdir, Khalid:
  Non-Linear Numerical Homogenization: Application to Elasto-Plastic Materials.
  Université de Lille Nord de France, France, 2014.
• Mao, Jiazhen:
  Multiscale Modeling Approach for the Progressive Failure Analysis of Textile Composites.
  National University of Singapore, Singapore, 2014.
• Müller, Sebastian:
  Modellierung des schädigungsbehafteten inelastischen Materialverhaltens von Faser-Kunststoff-Verbunden.
  TU Dresden, Germany, 2014.
• Nguyen, Van Dung:
  Computational Homogenization of Cellular Materials Capturing Micro-Buckling, Macro-Localization and Size Effects.
  Université de Liège, Belgium, 2014.
• Öhman, Mikael:
  On Computational Modeling of Sintering Based on Homogenization.
  Chalmers University of Technology, Göteborg, Sweden, 2014.
• Sorg, Annika:
  Adaptive diskret-kontinuierliche Modellierung von Materialien mit Mikrostruktur.
  Universität Stuttgart, Germany, 2014.
• Spahn, Johannes:
  An Efficient Multiscale Method for Modeling Progressive Damage in Composite Materials.
  TU Kaiserslautern, Germany, 2014.
• Teng, Chong:
  Variational Asymptotic Method for Unit Cell Homogenization of Thermomechanical Behavior of Composite Materials.
  Utah State University, Logan, UT, 2014.
• Zangmeister, Tobias:
  On the Extended Finite Element Method for the Elasto-Plastic Deformation of Heterogeneous Materials.
  TU Kaiserslautern, Germany, 2014.
• Zhang, Jinjun:
  Multiscale Modeling of Heterogeneous Material Systems.
  Arizona State University, Tempe, AZ, 2014.
  [Top]

2015

• Alleman, Coleman:
  Distribution Enhanced Methods for Homogenization for Heterogeneous Materials and Multi-Scale Crystal Plasticity Modeling.
  Johns Hopkins University, Baltimore, MD, 2015.
• Carleton, James B.:
  Microscale Modeling of Layered Fibrous Networks with Applications to Biomaterials for Tissue Engineering.
  University of Texas at Austin, Austin, TX, 2015.
• Fliegener, Sascha:
  Micromechanical Finite Element Modeling of Long Fiber Reinforced Thermoplastics.
  KIT, Karlsruhe, Germany, 2015.
• Heyden, Stefanie:
  Mechanical Damage and Fracture in Elastomeric Polymers.
  Caltech, Pasadena, CA, 2015.
• Köll, Jonas:
  Modeling of Rigid Foams.
  KTH, Stockholm, Sweden, 2015.
• Matveeva, Anna M.:
  Structure-Property Relationships in Polymer Nanocomposites.
  Universidade do Minho, Guimarães, Portugal, 2015.
• Pike, Matthew:
  Mechanical Modeling of Short Fiber Reinforced Composites Using the Extended Finite Element Method.
  Vanderbilt University, Nashville, TN, 2015.
• Saharan, Ankit:
  Homogenization and Elastic-Plastic Transitions in Random and FGM Microstructures.
  University of Illinois at Urbana-Champaign, Urbana, IL, 2015.
• Scorza, Daniela:
  Mechanical Modelling of Short-Fibre-Reinforced Materials under Static and Cyclic Loading.
  Universitá di Parma, Italy, 2015.
• Sheidaei, Azadeh:
  Multiscale Modeling Polymer Nanocomposites.
  Michigan State University, East Lansing, MI, 2015.
• Sparks, Paul:
  Reduced Order Homogenization Models of Failure of Heterogeneous Materials.
  Vanderbilt University, Nashville, TN, 2015.
• Tiburtius, Sara:
  Homogenization for the Multiple Scale Analysis of Musculoskeletal Mineralized Tissues.
  TU Darmstadt, Germany, 2015.
• Vecchio, Irene:
  Image Based Characterization and Geometric Modeling of 3D Materials Microstructures.
  TU Kaiserslautern, Germany, 2015.
  [Top]

2016

• Chen, Fenjuan:
  Micromechanical Modelling of Heterogeneous Porous Materials with Application to Oolithic Rocks.
  Université de Lorraine, Nancy, France, 2016.
• Chen, Geng:
  Strength Prediction of Particulate Reinforced Metal Matrix Composites.
  RWTH Aachen, Germany, 2016.
• de Geus, Tom J.W.:
  From Damage to Fracture, from Micro to Macro: A Systematic Study of Ductile Fracture in Multi-Phase Structures.
  TU Eindhoven, The Netherlands, 2016.
• Deierling, Phillip E.:
  Thermomechanical Response of Metal-Ceramic Graded Composites for High-Temperature Aerospace Applications.
  University of Iowa, Iowa City, IA, 2016.
• Gillman, Andrew S.:
  Predicting Effective Material Properties of Heterogeneous Composites from Well-Resolved Higher-Order Statistical Description of Morphology.
  University of Notre Dame, Notre Dame, IN, 2016.
• Nafar Dastgerdi, Jairan:
  Mechanical Modeling of Particulate Reinforced Metal Matrix Composites.
  Aalto University, Finland, 2016.
• Otero Gruer, Fermin:
  Multiscale Numerical Modelling of Microstructured Reinforced Composites.
  Universitat Politècnica de Catalunya, Barcelona, Spain, 2016.
• Rastkar, Siavash:
  Characterization of Homogenized Mechanical Properties of Porous Ceramic Materials Based on Their Realistic Microstructure.
  Florida International University, Miami, FL, 2016.
• Recchia, Stephen:
  Multiscale Modeling of Interwoven Kevlar Fibers Based on Random Walk to Predict Yarn Structural Response.
  Rutgers University, New Brunswick, NJ, 2016.
• Toulemonde, Paul-Aymé:
  Etude de la relation microstructure/propriétés mécaniques jusqu'à rupture des propergols composites: Caractérisation expérimentale et modélisation micromécanique par éléments finis.
  ENSAM Paris, Paris, France, 2016.
• Traxl, Roland:
  Continuum Micromechanics-Based Determination of Effective Properties of Elastoplastic Matrix-Inclusion Materials: Application within the Finite Element Analysis of Indentation and Impact Problems.
  Universität Innsbruck, Austria, 2016.
• Tu, Wenqiong.:
  CZM-Based Finite-Volume Homogenization and Optimization of Periodic Composites.
  University of Virginia, Charlottesville, VA, 2016.
• Turner, David M.:
  Construction of Representative 3D Microstructures from Complete and Partial Statistics.
  Georgia Institute of Technology, Atlanta, GA, 2016.
• Vieira de Carvalho, Miguel:
  Computational Framework for Multi-Scale Analysis of Heterogeneous Materials using Digital Image Recognition.
  Universidade do Porto, Portugal, 2016.
• Wang, Yang:
  A Micromechanics Study on Carbon-Based and Multiferroic Composites.
  Rutgers University, New Brunswick, NJ, 2016.
• Zacharopoulos, Panagiotis G.:
  Modelling the Effects of Heterogeneity on the Mechanical Response of Solids.
  Imperial College, London, UK, 2016.
  [Top]

2017

• El Ghezal, Marieme I.:
  Contribution to the Nonlinear Micromechanical Modeling of Composite and Porous Materials under Small and Large Deformation.
  Université Catholique de Louvain, Belgium, 2017.
• Kravchenko, Sergii G.:
  Failure Analysis in Platelet Molded Composite Systems.
  Purdue University, West Lafayette, IN, 2017.
• Kuksenko, Dmytro:
  Thermomechanical Modeling and Homogenization of Composite Materials with Continuous Wavy Fibers.
  New Mexico State University, Las Cruces, NM, 2017.
• Lemaitre, Sophie:
  Modélisation des matériaux composites multiphasiques à microstructures complexes: Etude des propriétés effectives par des méthodes d'homogénéisation.
  Normandie Université, Caen, France, 2017.
• Ozturk, Tugce:
  Experimental and Computational Investigation of the Microstructure-Mechanical Deformation Relationship in Polycrystalline Materials, Applied to Additively Manufactured Titanium Alloys.
  Carnegie Mellon University, Pittsburgh, PA, 2017.
• Scheunemann, Lisa:
  Scale-Bridging of Elasto-Plastic Microstructures Using Statistically Similar Representative Volume Elements.
  Universität Duisburg-Essen, Germany, 2017.
• Svenning, Erik:
  Multiscale Modeling of Ductile Fracture in Solids.
  Chalmers University of Technology, Göteborg, Sweden, 2017.
• Trofimov, Anton S.:
  Homogenization of Composite Materials with Non-Ellipsoidal Inhomogeneities Using the Property Contribution Tensor Approach.
  New Mexico State University, Las Cruces, NM, 2017.
• Vass, Viktória:
  Continuum Micromechanics of Textured Microstructures: Bone, Bone Biomaterials and Paper.
  TU Wien, Vienna, Austria, 2017.
• Zeng, Zhi:
  Multiscale Modeling and Uncertainty Analysis of Mechanical Behavior of Nanostructured Metals.
  Georgia Institute of Technology, Atlanta, GA, 2017.
• Zenia, Sofiane:
  Modélisation numérique de l'usinage des matériaux composites à matrice polymère et fibres longues de carbone.
  Université de Lorraine, Nancy, France, 2017.
• Zhang, Jun:
  Scale-Dependent Homogenization of Elastic-Viscoelastic Random Composites.
  University of Illinois at Urbana-Champaign, Urbana, IL, 2017.
• Zelhofer, Alex J.:
  Computational Modeling of the Mechanics of Elastic Structural Lattices: Effects of Lattice Architecture and Hierarchy.
  California Institute of Technology, Pasadena, CA, 2017.
  [Top]

2018

• Brachthauser Balcells, Savina:
  Modeling of Fiber Microbuckling in Soft Composites under Bending.
  University of Colorado, Boulder, CO, 2018.
• Del Toro, Rosaria:
  Dynamic Homogenization of Composite Viscoelastic Materials.
  IMT Lucca, Italy, 2018.
• Goldberg, Niels:
  Homogenisierung und Modellierung des Materialverhaltens kurzfaserverstärkter Thermoplaste.
  TU Chemnitz, Chemnitz, Germany, 2018.
• Gulizzi, Vincenzo:
  A Computational Framework for Microstructural Modelling of Polycrystalline Materials with Damage and Failure.
  Università degli Studi di Palermo, Italy, 2018.
• Herráez, Miguel:
  Computational Micromechanics Models for Damage and Fracture of Fiber-Reinforced Polymers.
  Universidad Politécnica de Madrid, Spain, 2018.
• Kehrer, Maria L.:
  Thermomechanical Mean-Field Modeling and Experimental Characterization of Long Fiber-Reinforced Sheet Molding Compound Composites.
  KIT, Karlsruhe, Germany, 2018.
• Leuschner, Matthias:
  Numerically Efficient Computational Homogenization: Fourier-Accelerated Nodal Solvers and Reduced Basis Model Order Reduction.
  Universität Stuttgart, Germany, 2018.
• Lobos Fernández, Mauricio:
  Homogenization and Materials Design of Mechanical Properties of Textured Materials Based on Zeroth-, First- and Second Order Bounds of Linear Behavior.
  KIT, Karlsruhe, Germany, 2018.
• Nguyen, Minh Tan:
  Contribution aux méthodes de calcul des propriétés élastiques et de transport des milieux hétérogènes par la Transformée de Fourier.
  Université Paris-Est, Marne-la-Vallée, France, 2018.
• Schemmann, Malte:
  Biaxial Characterization and Mean-Field Based Damage Modeling of Sheet Molding Compound Composites.
  KIT, Karlsruhe, Germany, 2018.
• Tal, David:
  Uncertainty Quantification in Composite Materials.
  Columbia University, New York, NY, 2018.
• Zhu, Wenqi:
  Effective Elastic Properties of Foams: Morphological Study and Micromechanical Modeling.
  INSA Lyon, France, 2018.
  [Top]

2019

• Bo, Peng:
  Modeling Boundary Effect Problems of Heterogeneous Structures by Extending Mechanics of Structure Genome.
  Purdue University, West Lafayette, IN, 2019.
• Dillenberger, Felix:
  On the Anisotropic Plastic Behaviour of Short Fibre Reinforced Thermoplastics and Its Description by Phenomenological Material Modelling.
  TU Darmstadt, Darmstadt, Germany, 2019.
• Furer, Joshua R.:
  Problems In Nonlinear Homogenization: Bounds, Estimates, Macroscopic Instabilities, And Post-Bifurcation Response.
  University of Pennsylvania, Philadelphia, PA, 2019.
• Gallican, Valentin:
  Homogenization Estimates for Polymer-Based Viscoelastic Composite Materials.
  Sorbonne Université, Paris, France, 2019.
• Kochmann, Julian:
  Efficient FE-and FFT-Based Two-Scale Methods for Micro-Heterogeneous Media.
  RWTH Aachen, Germany, 2019.
• Liu, Burigede:
  Micromechanics of Ultra-High Molecular Weight Polyethylene Fibre Composites.
  University of Cambridge, Cambridge, UK, 2019.
• Schneider, Konrad:
  Computational Micromechanics of Matrix-Inclusion Composites.
  TU Hamburg, Germany, 2019.
• Sridhar, Ashwin:
  Computational Homogenization of Acoustic Metamaterials Towards Emergent Generalized Continua.
  TU Eindhoven, The Netherlands, 2019.
• Vidyasagar, A.:
  Predicting Microstructural Pattern Formation Using Stabilized Spectral Homogenization.
  California Institute of Technology, Pasadena, CA, 2019.
• Zerhouni, Othmane:
  A Study on the Effective Elastic Properties of Materials with Microstrucure: 3D Printing, Experiments and Numerics.
  Institut Polytechnique de Paris, France, 2019.
• Zhu, Yinghui:
  The Interface Energy and Particle Size Effects on Nanocomposites.
  UCLA, Los Angeles, CA, 2019.
  [Top]

2020

• Abueidda, Diab W.:
  Computational snd Experimental Analyses and Optimization of Architectured Materials.
  University of Illinois at Urbana-Champaign, Urbana, IL, 2020.
• Bousoura, Houssem:
  Sur un estimateur micromécanique de type Eshelby général et explicite pour l'elasticité, la thermique et la thermoelasticité: application aux inclusions multicouche.
  Université de Paris XIII, Villetaneuse, France, 2020.
• Couture, Adrien:
  Automatisation de la modélisation numérique des microstructures de matériaux hétérogènes basée sur une intégration CAO-calcul.
  Université du Québec à Trois-Rivières, PQ, Canada, 2020.
• de Francqueville, Foucault:
  Etude micromécanique du lien entre endommagement local et comportement macroscopique de propergols solides.
  Institut Polytechnique de Paris, France, 2020.
• Kabore, Brice W.:
  Microstructure-Based Multiscale Modeling of Mechanical Response for Materials with Complex Microstructures.
  Université du Luxembourg, Luxembourg, 2020.
• Kaul, Jan:
  A Constitutive Model for Fiber Reinforced Plies - Anisotropic Evolution of Damage and Plasticity.
  TU Wien, Vienna, Austria, 2020.
• Lee, Sangryun:
  Micromechanics-Based Homogenization of the Effective Physical Properties of Reinforced Composite.
  KAIST, Daejeon, South Korea, 2020.
• Lo Cascio, Marco:
  Virtual Element Based Formulations for Computational Materials Micro-Mechanics and Homogenization.
  Università di Palermo, Italy, 2020.
• Lucarini San José, Sergio:
  Micromechanics Based Fatigue Modeling Using Fast Fourier Transform Based Homogenization.
  Universidad Politécnica de Madrid, Spain, 2020.
• Schmerbauch, Mario:
  Mikromechanische Versagensmodellierung langfaserverstärkter Verbundwerkstoffe.
  Universität Kassel, Germany, 2020.
• Varandas, Luis:
  High-Resolution Numerical Models for Damage Assessment in Composite Materials.
  Queen's University, Belfast, UK, 2020.
  [Top]

2021

• Aissa, Nesrin:
  Simulation haute performance des suspensions des fibres courtes pour les procédés de fabrication de composite.
  Ecole Centrale de Nantes, France, 2021.
• Bichara Vieira, Renato:
  Strain Inhomogeneities During Plasticity and Creep of Metals: Representative Volume Elements and Microscale Strain Predictions.
  University of Illinois at Urbana--Champaign, Urbana, IL, 2021.
• Ceglar, Tilen:
  Modelling and Simulation Concepts for Fibre Reinforced Polymers.
  TU Wien, Vienna, Austria, 2021.
• Dietrich, Felix:
  Periodic Homogenization and FFT-Based Methods for Resolving Microstructures of Linear Magneto-Elastic Problems.
  TU Kaiserslautern, Germany, 2021.
• Kammer, Christoph:
  Analytical Homogenization Estimates for the Effective Properties and Field Statistics of Viscoplastic Composites and Particle Suspensions.
  University of Pennsylvania, Philadelphia, PA, 2021.
• Lo Cascio, Marco:
  Virtual Element Based Formulations for Computational Materials Micro-Mechanics and Homogenization.
  Università di Palermo, Italy, 2021.
• Rique Garaizar, Orzuri:
  Multiscale Thermoviscoelastic Modeling of Composite Materials.
  Purdue University, West Lafayette, IN, 2021.
• Sabet, Fereshteh A.:
  Finite Element Modeling of Mechanical Properties of Bone and Bio-Inspired Composites with Stiff and Soft Continuous Compared to Discontinuous Phases.
  University of Illinois at Urbana-Champaign, Urbana, IL, 2021.
• Wu, Chunlin:
  Virtual Experiments on Designs of Composites With the Inclusion-Based Boundary Element Method (iBEM).
  Columbia University, New York, NY, 2021.
  [Top]

2022

• Barzegar, Mostafa:
  Computational Micromechanics Investigation of Longitudinal Strength in Unidirectional Fibre Reinforced Composites.
  Universitat de Girona, Girona, Spain, 2022.
• Görthofer, Johannes:
  Microstructure Generation and Micromechanical Modeling of Sheet Molding Compound Composites.
  KIT, Karlsruhe, Germany, 2022.
• Ma, Xiao:
  The Elastic and Damage Modeling of Heterogeneous Materials Based on the Fast Fourier Transform.
  Université de Lille, France, 2022.
• Saeb, Saba:
  Computational Homogenization Accounting for Imperfect Interfaces.
  Universität Erlangen-Nürnberg, Erlangen, Germany, 2022.
• Spilker, Kevin:
  Clustering Analysis for the Micromechanics-Based Reduced Homogenization in the Mechanics of Composite Materials.
  Université de Liége, Liége, Belgium, 2022.
• Tao, Fei:
  Physics-Based Data-Driven Modeling of Composite Materials and Structures Through Machine Learning.
  Purdue University, West Lafayette, IN, 2022.
• Zhou, Hao:
  Accelerated Computational Micromechanics.
  California Institute of Technology, Pasadena, CA, 2022.
  [Top]

2023

• Belgrand, Louis:
  Autour de la précision des solutions à l' échelle microscopique dans le cadre de la modélisation du comportement thermo-mécanique multiéchelle de matériaux hétérogènes.
  Aix-Marseille Université, Marseille, 2023.
  [Top]

Notes on assessing bibliographic information and obtaining copies of doctoral theses:

• Copies of doctoral theses from many universities can be obtained via the Dissertation Express service.
• Bibliographic information on French doctoral theses can be accessed via the Sudoc Catalogue and theses.fr.
• Dissertations from the Nordic countries be accessed via the DiVA portal.
• German doctoral theses can be searched for via the Dissonline portal.
• You can also try the DART European E-Theses Portal
• Finally, lots of information can be accessed via the OCLC WorldCat Search

If you know of other pertinent theses or if you find errors in the data given above, please, forward the information to hjb@ilsb.tuwien.ac.at.