Institute of Lightweight Structures and Aerospace Engineering

Selected Recent Publications
FRANZ G. RAMMERSTORFER

Faghfouri S., Rammerstorfer F.G.:
Mode Transitions in Buckling and Post-Buckling of Stretched-Twisted Strips;
Int.J.Non-Lin.Mech. 127, 103609, 2020.
Abstract

Predan J., Kegl M., Abart R., Fischer F.D., Rammerstorfer F.G.:
On an Alternative Approach for Simulating Chemically Induced Crack Pattern Evolutions in a Single Crystal;
Int.J.Sol.Struct. 202, 575-586, 2020.
Abstract

Kirchlechner C., Toth F., Rammerstorfer F.G., Fischer F.D., Dehm G.:
Pre- and Post-Buckling Behavior of Bi-Crystalline Micropillars: Origin and Consequences;
Acta mater. 124, 195-203, 2017.
Abstract

Daum B., Rammerstorfer F.G.:
The Symmetric Buckling Mode in Laminated Elastoplastic Micro-Structures Under Plane Strain;
Acta Mech. 227, 2843-2859, 2016.
Abstract

Hartmann M.A., Todt M., Rammerstorfer F.G.:
Atomistic and Continuum Modelling of Graphene and Graphene-Derived Carbon Nanostructures;
in Structure and Multiscale Mechanics of Carbon Nanomaterials (Ed. O.Paris), pp. 135-179; Springer-Verlag, Vienna, 2016.
Abstract

Nyashin Y., Nyashin M., Osipenko M., Lokhov V., Dubinin A., Rammerstorfer F.G., Zhurov A.:
Centre of Resistance and Centre of Rotation of a Tooth: Experimental Determination, Computer Simulation and the Effects of Tissue Nonlinearity;
Comput.Meth.Biomech.Biomed.Engng 19, 229-239, 2016.
Abstract

Marx V.M., Toth F., Wiesinger A., Berger J., Kirchlechner C., Cordill M.J., Fischer F.D., Rammerstorfer F.G., Dehm G.:
The Influence of a Brittle Cr Interlayer on the Deformation Behavior of Thin Cu Films on Flexible Substrates: Experiment and Model;
Acta mater. 89, 278-289, 2015.
Abstract

Todt M., Bitsche R.D., Hartmann M.A., Fischer F.D., Rammerstorfer F.G.:
Growth Limit of Carbon Onions - A Continuum Mechanical Study;
Int.J.Sol.Struct. 51, 706-715, 2014.
Abstract

Todt M., Toth F., Hartmann M.A., Holec D., Cordill M.J., Fischer F.D., Rammerstorfer F.G.:
Computational Simulation of Instability Phenomena in Nanoparticles and Nanofilms; Comput.Technol.Rev. 10, 89-119, 2014.
Abstract

Hartmann M.A., Todt M., Rammerstorfer F.G., Fischer F.D., Paris O.:
Elastic Properties of Graphene Obtained by Computational Mechanical Tests;
Europhys.Lett. 103, 68004, 2013.
Abstract

Toth F., Rammerstorfer F.G., Cordill M.J., Fischer F.D.:
Detailed Modelling of Delamination Buckling of Thin Films under Global Tension;
Acta mater. 61, 2425-2433, 2013.
Abstract

Bilik C., Rammerstorfer F.G., Figala G., Buchmayr B.:
Computational Modelling of Laser Treatment of Plates for Increased Buckling Loads and Natural Frequencies;
J.Mech.Engng.Sci. 225, 2385-2398, 2011.
Zusammenfassung

Flatscher T., Daxner T., Pahr D.H., Rammerstorfer F.G.:
Optimization of Corrugated Paperboard under Local and Global Buckling Constraints;
in Multiscale Methods in Computational Mechanics, (Eds. R.de Borst, E.Ramm), pp. 329-346;
Springer-Verlag, Dordrecht, 2011.
Abstract

Todt M., Rammerstorfer F.G., Fischer F.D., Mayrhofer P.H., Holec D., Hartmann M.A.:
Continuum Modeling of van der Waals Interactions between Carbon Onion Layers;
Carbon 49, 1620-1627, 2011.
Abstract

Todt M., Rammerstorfer F.G., Hartmann M.A., Paris O., Fischer F.D.:
Shell-Models for Multi-Layer Carbon Nano-Particles;
in Shell-Like Structures (Eds. H.Altenbach, V.A.Eremeyev), pp. 585-602;
Springer-Verlag, Berlin, 2011.
Abstract

Daxner T., Fischer F.D., Rammerstorfer F.G.:
Stability of Rod-Shaped Nanoparticles Embedded in an Elastic Matrix;
Phil.Mag. 90, 2027-2048, 2010.
Abstract

Holec D., Hartmann M.A., Fischer F.D., Rammerstorfer F.G., Mayrhofer P.H., Paris O.:
Curvature-Induced Excess Surface Energy of Fullerenes: Density Functional Theory and Monte Carlo Simulations;
Phys.Rev. B 81, 235403, 2010.
Abstract

Todt M., Rammerstofer F.G., Paris O., Fischer F.D.:
Nanomechanical Studies of the Compressive Behavior of Carbon Fibers;
J.Mater.Sci. 45, 6845--6848, 2010.

Rammerstorfer F.G., Daxner T.:
Berechnungs- und Design-Konzepte für den Leichtbau;
in Leichtbau (Eds. H.P.Degischer, S.Lüftl), pp. 14-49; Wiley-VCH, Weinheim, 2009.

Pahr D.H., Rammerstorfer F.G.:
Buckling of Honeycomb Sandwiches: Periodic Finite Element Considerations; Comput.Model.Engng.Sci. 12, 229-241, 2006.
Abstract

Rammerstorfer F.G., Pahr D.H., Daxner T., Vonach W.K.:
Buckling in Thin Walled Micro and Meso Structures of Lightweight Materials and Material Compounds;
Comput.Mech. 37, 470-478, 2006.
Abstract

Rammerstorfer F.G., Fischer F.D., Friedl N., Daxner T.:
Instabilities Resulting from the Production Process of Plates and Shells;
in Innovation in Computational Strcutures Technology (Eds. B.H.V.Topping, G.Montero, R.Montenegro), pp. 205-223;
Saxe-Coburg Publications, Edinburgh, 2006.
Abstract

Fischer F.D., Friedl N., Noé A., Rammerstorfer F.G.:
A Study of the Buckling Behaviour of Strips and Plates with Residual Stress;
Steel Res. Int. 76, 327-335, 2005.
Abstract

Pahr D.H., Rammerstorfer F.G.:
A Fast Multi-Scale Analyzing Tool for the Investigation of Perforated Laminates;
Comput.Struct. 82, 227-239, 2004.
Abstract

Pahr D.H., Schuecker C., Rammerstorfer F.G., Pettermann H.E.:
Numerical Investigations of Perforated Laminates in the Presence of Residual Ply Stresses:
J.Compos.Mater. 38, 1977-1991, 2004.
Abstract

Fischer F.D., Rammerstorfer F.G., Friedl N.:
Residual Stress-Induced Center Wave Buckling of Rolled Strip Metal;
J.Appl.Mech. 70, 84-90, 2003.
Abstract

Daxner T., Böhm H.J., Seitzberger M., Rammerstorfer F.G.:
Modeling of Cellular Materials;
in Handbook of Cellular Metals (Eds.: H.P.Degischer, B.Kriszt), pp. 245-280; Wiley-VCH, Weinheim, Germany, 2002.

Mang H.A., Rammerstorfer F.G., Eberhardsteiner J. (Eds.):
Proceedings of the Fifth World Congress on Computational Mechanics (WCCM V).
TU Wien, Vienna, 2002.

Pahr D.H., Rammerstorfer F.G.:
Multi-Scale Analyses of Perforated Laminates;
in Proc. Fifth World Congress on Compuational Mechanics (WCCM V) (Eds. H.A.Mang, F.G. Rammerstorfer, J. Eberhardsteiner), Paper # 81132; TU Wien, Wien, 2002.
Abstract        Full Paper (pdf)

Pahr D.H., Rammerstorfer F.G.:
Meso-Macro Analyses of Perforated Laminates;
in Proc. of the International Conference on New Challenges in Mesomechanics (Eds. R.Pyrz, J. Schjødt-Thomsen, J.C. Rauhe, T. Thomsen, L.R. Jensen), pp. 147-154; Aalborg University, Aalborg, Denmark, 2002.

Pahr D.H., Rammerstorfer F.G., Rosenkranz P., Humer K., Weber H.W.:
A Study of Short-Beam-Shear and Double-Lap-Shear Specimens of Glass Fabric/Epoxy Composites;
Composites 33B, 225-232, 2002.
Abstract

Rammerstorfer F.G., Daxner T., Böhm H.J.:
Modeling and Simulation - Introduction;
in Handbook of Cellular Metals (Eds. H.P.Degischer, B.Kriszt), pp. 243-245; Wiley-VCH, Weinheim, Germany, 2002.

Pahr D.H., Rammerstorfer F.G.:
Experimental and Numerical Determinaion of the Inter-Laminar Shear Strength for Short-Beam-Shear and Double-Lap-Shear Specimens;
in Proc. 6th International Conference on Deformation and Failure of Composites, pp. 357-365; IOM Communications, London, UK, 2001
Abstract

Pahr D.H., Daxner T., Rammerstorfer F.G., Böhm H.J.:
On Micro/Meso/Macro Modeling of Composite Lightweight Materials and Structures;
in Computational Mechanics: New Frontiers for the New Millenium (Eds. S.Valiappan, N.Khalili), pp. 753-762; Elsevier, Amsterdam, 2001.

Rammerstorfer F.G., Fischer F.D., Friedl N.:
Buckling of Free Infinite Strips Under Residual Stresses and Global Tension;
J.Appl.Mech. 68, 399-404, 2001.
Abstract

Rosenkranz P., Humer K., Weber H.W.,Pahr D.H., Rammerstorfer F.G.:
Static and Dynamic Scaling Experiments on Double Lap Shear Specimens at Room Temperature and at 77 K;
Cryogenics 41, 21-25, 2001.
Abstract

Vonach W.K., Rammerstorfer F.G.:
A General Approach to the Wrinkling Instability of Sandwich Plates;
Struct.Engng.Mech. 12, 363-376, 2001.
Abstract

Chimani C.M., Rammerstorfer F.G., Böhm H.J.:
On Curvature Effects on the Materials Description of Unidirectionally Reinforced Composite Materials;
Comput.Meth.Appl.Mech.Engng. 185, 191-201, 2000
Abstract

Daxner T., Rammerstorfer F.G., Böhm H.J.:
Adaptation of Density Distributions for Optimising Aluminium Foam Structures;
Mater.Sci.Technol. 16, 935-939, 2000
Abstract

Fischer F.D., Rammerstorfer F.G.:
A Note on a Simple Recategorisation of Cracks in Fatigue Analysis;
Engng.Fract.Mech. 66, 41-49, 2000
Abstract

Fischer F.D., Rammerstorfer F.G., Friedl N., Wieser W.:
Buckling Phenomena Related to Rolling and Levelling of Sheet Metal;
Int.J.Mech.Sci. 42, 1887-1910, 2000
Abstract

Friedl N., Rammerstorfer F.G., Fischer F.D.:
Buckling of Stretched Strips;
Comput.Struct. 78, 185-190, 2000
Abstract

Rammerstorfer F.G., Böhm H.J.:
Finite Element Methods in Micromechanics of Composites and Foam Materials;
in Computational Mechanics for the Twenty-First Century (Ed. B.H.V. Topping), pp. 145-164; Saxe-Coburg Publications, Edinburgh, 2000.
Abstract

Seitzberger M., Rammerstorfer F.G., Gradinger R., Degischer H.P., Blaimschein M., Walch C.:
Experimental Studies on the Quasi-Static Axial Crushing of Steel Columns Filled with Aluminium Foam;
Int.J.Sol.Struct. 37, 4125-4147, 2000
Abstract

Vonach W.K., Rammerstorfer F.G.:
The Effects of In-Plane Core Stiffness on the Wrinkling Behavior of Thick Sandwiches;
Acta Mech. 141, 1-10, 2000
Abstract

Vonach W.K., Rammerstorfer F.G.:
Wrinkling of Thick Orthotropic Sandwich Plates under General Loading Conditions;
Arch.Appl.Mech. 70, 338-348, 2000
Abstract

Buryachenko V.A., Rammerstorfer F.G.:
On the Thermoelasticity of Random Structure Particulate Composites;
J.Appl.Math.Phys.(ZAMP) 50, 934-947, 1999
Abstract

Daxner T., Böhm H.J., Rammerstorfer F.G.:
Mesoscopic Simulation of Inhomogeneous Metallic Foams with Respect to Energy Absorption;
Comput.Mater.Sci. 16, 61-69, 1999
Abstract

Daxner T., Böhm H.J., Rammerstorfer F.G.:
Influence of Micro- and Meso-Topological Properties on the Crash-Worthiness of Aluminium Foams;
in Metal Foams and Porous Metal Structures (Eds. J.Banhart, M.F.Ashby, N.A.Fleck), pp. 283-288; Verlag Metall Innovation Technologie, Bremen, 1999
Abstract

Fischer F.D., Rammerstorfer F.G.:
A Refined Analysis of Sloshing Effects in Seismically Excited Tanks;
Int.J.Press.Vessels and Piping 76, 693-709, 1999
Abstract

Gradinger R., Rammerstorfer F.G.:
On the Influence of Meso-Inhomogeneities on the Crush Worthiness of Metal Foams;
Acta mater. 47, 143-148, 1999
Abstract

Gradinger R., Seitzberger M., Rammerstorfer F.G., Degischer H.P., Blaimschein M., Walch C.:
Aluminium Foam Filled Steel Tubes as Composite Shock Absorbers;
in Metal Foams and Porous Metal Structures (Eds. J.Banhart, M.F.Ashby, N.A.Fleck), pp. 313-316; Verlag Metall Innovation Technologie, Bremen, 1999

Martikainen L.J., Rammerstorfer F.G.:
Modelling the Local Failure Modes in Thin-Faced Sandwich Panels;
Strojnicky Casopis 50, 241-252, 1999
Abstract

Pettermann H.E., Plankensteiner A.F., Böhm H.J., Rammerstorfer F.G.:
A Thermo-Elasto-Plastic Constitutive Law for Inhomogeneous Materials Based on an Incremental Mori-Tanaka Approach;
Comput.Struct. 71, 197-214, 1999
Abstract

Rammerstorfer F.G., Plankensteiner A.F., Fischer F.D., Antretter T.:
Hierarchical Models for Simulating the Mechanical Behavior of Heterogeneous Materials: An Approach to High Speed Tool Steel;
Mater.Sci.Engng. A259, 73-84, 1999
Abstract

Seitzberger M., Rammerstorfer F.G.:
Study of Axisymmetric Crushing Mechanisms by Sequential Limit Analysis;
Int.J.Crashworthiness 4, 379-393, 1999
Abstract

Silberschmidt V.V., Rammerstorfer F.G., Werner E.A., Fischer F.D., Uggowitzer P.J.:
On Material Immanent Ratchetting of Two-Phase Materials under Cyclic Purely Thermal Loading;
Arch.Appl.Mech. 50, 727-750, 1999
Abstract

Chimani C.M., Böhm H.J., Rammerstorfer F.G.:
On Interface Edge Singularities in Layered Composites;
ZAMM 78, S49-S52, 1998

Plankensteiner A.F., Böhm H.J., Rammerstorfer F.G., Pettermann H.E.:
Multiscale Modeling of Highly Heterogeneous Particulate MMCs;
J.Physique IV 8, Pr-8-301-Pr-8-308, 1998
Abstract

Seitzberger M., Rammerstorfer F.G.:
Study of Axisymmetric Crushing Mechanisms by Sequential Limit Analysis;
in Proc.IJCrash'98 (Eds. E.C.Chirwa, D.C.Viano), pp. 509-521; Woodhead Publishing, Cambridge, 1998
Abstract

Werner E., Böhm H.J., Prantl W., Rammerstorfer F.G.:
Plasticity and Damage of a Fiber Reinforced Aluminum Alloy: Experiments and Micromechanical Modeling;
ZAMM 78, S77-S80, 1998

Buryachenko V.A., Rammerstorfer F.G.:
Elastic Stress Fluctuations in Random Structure Particulate Composites;
Eur.J.Mech. A/Solids 16, 79-102, 1997
Abstract

Buryachenko V.A., Rammerstorfer F.G., Plankensteiner A.P.:
A Local Theory of Elastoplastic Deformations of Random Structure Composites;
ZAMM 77, ZS61-S62, 1997.

Chimani C.M., Böhm H.J., Rammerstorfer F.G.:
On Stress Singularities at Free Edges of Bimaterial Junctions - A Micromechanical Study;
Scripta mater. 36, 943-947, 1997
Abstract

Nyashin M.Y., Pechenov V.S., Rammerstorfer F.G.:
Determination of Optimal Orthodontic Forces;
Russian J.Biomech. 1-2, 84-96, 1997
Abstract

Pettermann H.E., Böhm H.J., Rammerstorfer F.G.:
Some Direction-Dependent Properties of Matrix-Inclusion Type Composites with Given Reinforcement Orientation Distributions;
Composites 28B, 253-265, 1997
Abstract

Pettermann H.E., Reiter T.J., Rammerstorfer F.G.:
Computational Simulation of Internal Bone Remodeling;
Arch.Comput.Meth.Engng. 4, 295-323, 1997
Abstract

Plankensteiner A.F., Böhm H.J., Rammerstorfer F.G., Buryachenko V.A., Hackl G.:
Modeling of Layer-Structured High Speed Steel;
Acta mater. 45, 1875-1887, 1997
Abstract

Seitzberger M., Rammerstorfer F.G., Reichhold C.:
Lokale Effekte in Linientragwerken mit geringer Biegesteifigkeit;
ZAMM 77, S311-S312, 1997

Seitzberger M., Rammerstorfer F.G., Degischer H.P., Gradinger R.:
Crushing of Axially Compressed Steel Tubes Filled with Aluminium Foam;
Acta Mech. 125, 93-105, 1997
Abstract

Nikitin L.V., Fischer F.D., Oberaigner E.R., Rammerstorfer F.G., Seitzberger M., Mogilevsky R.I.:
On the Frictional Behaviour of Thermally Loaded Beams Resting on a Plane;
Int.J.Mech.Sci. 38, 1219-1229, 1996
Abstract

Plankensteiner A.F, Böhm H.J., Rammerstofer F.G., Buryachenko V.A:
Hierarchical Modeling of the Mechanical Behavior of High Speed Steels as Layer-Structured Particulate MMCs;
J.Physique IV 6 Colloque C6, pp. 395-402, 1996
Abstract

Skrna-Jakl I.C., Stiftinger M.A., Rammerstorfer F.G.:
Numerical Investigations of an Imperfect Stringer-Stiffened Wing Torsion Box - An Analysis Concept;
Composites 27B, 59-69, 1996
Abstract

Wang X., Rammerstorfer F.G.:
Determination of Effective Breadth and Effective Width of Stiffened Plates by Finite Strip Analysis;
Thin-Walled Struct. 26, 261-286, 1996
Abstract

Stiftinger M.A., Skrna-Jakl I.C., Rammerstorfer F.G.:
Buckling and Postbuckling Investigation of Imperfect Stringer-Stiffened Curved Composite Shells; Part B: Computational Investigations;
Thin-Walled Struct. 23, 339-350, 1995
Abstract

Fischer F.D., Rammerstorfer F.G.:
Mode-I Crack Projektion Procedure Using the Strain Energy Density Criterion;
J.Theor.Appl.Fract.Mech. 20, 67-74, 1994
Abstract

Hult J., Rammerstorfer F.G. (Eds.):
Engineering Mechanics of Fibre Reinforced Polymers and Composite Structures.
CISM Courses and Lectures 348, Springer-Verlag, Wien, 1994

Rammerstorfer F.G., Starlinger A., Dorninger K.:
Combined Micro- and Macromechanical Considerations of Layered Composite Shells;
Int.J.Num.Meth.Engng. 37, 2609-2629, 1994
Abstract

Reiter T.J., Böhm H.J., Krach W., Pleschberger M., Rammerstorfer F.G.:
Some Applications of the Finite Element Method in Biomechanical Stress Analyses;
Int.J.Comput.Appl.Technol. 7, 233-241, 1994
Abstract

Wang X., Rammerstorfer F.G.:
Coupling Effects in Linear Stress and Buckling Analysis by the Finite Strip Method;
ZAMM 74, T712-T714, 1994
Abstract

Weissenbek E., Böhm H.J., Rammerstorfer F.G.:
Micromechanical Investigations of Arrangement Effects in Particle Reinforced Metal Matrix Composites;
Comput.Mater.Sci. 3, 263-278, 1994
Abstract

Böhm H.J., Rammerstorfer F.G., Weissenbek E.:
Some Simple Models for Micromechanical Investigations of Fiber Arrangement Effects in MMCs;
Comput.Mater.Sci. 1, 177-194, 1993
Abstract

Reiter T., Rammerstorfer F.G.:
Simulation of Natural Adaption of Bone Material and Application in Optimum Composite Design;
in Optimal Design with Advanced Materials (Ed.: P.Pedersen), pp. 25-36, Elsevier, Amsterdam, 1993
Abstract

Skrna-Jakl I., Rammerstorfer F.G.:
Numerical Investigations of Free Edge Effects in Integrally Stiffened Layered Composite Panels;
Compos.Struct. 25, 129-137, 1993
Abstract

Wang X., Rammerstorfer F.G.:
The Effective Width for Postcritically Loaded Stiffened Plates;
in Recent Developments in Computational Mechanics (Eds. P.K. Basu, A. Nagar), pp. 83-92; AD-Vol.39, ASME, New York, 1993.
Abstract

Weissenbek E., Rammerstorfer F.G.:
Influence of the Fiber Arrangement on the Mechanical and Thermo-Mechanical Behavior of Short Fiber Reinforced MMCs;
Acta Metall.Mater. 41, 2833-2843, 1993
Abstract

Rammerstorfer F.G. (Ed.):
Nonlinear Analysis of Shells by Finite Elements.
CISM Courses and Lectures 328, Springer-Verlag, Wien, 1992

Rammerstorfer F.G., Fischer F.D.:
A Method for the Experimental Determination of Residual Stresses in Axisymmetric Composite Cylinders;
J.Engng.Mater.Techn. 114, 90-96, 1992
Abstract

Rammerstorfer F.G., Fischer F.D., Böhm H.J., Daves W.:
Computational Micromechanics of Multiphase Materials;
Comput.Struct. 44, 453-458, 1992
Abstract

Rammerstorfer F.G., K.Scharf K., K.L.Maurer K.L., Fischer F.D.:
Stress Analysis of the Archduke Carl Monument in Vienna;
Int.J.Comput.Appl.Technol. 5, 100-108, 1992
Abstract

Reiter T.J., Rammerstorfer F.G., Böhm H.J.:
Zur numerischen Prognose spannungsbedingter Knochenumbildungen;
ZAMM 71, T693-T697, 1991

Starlinger A., Rammerstorfer F.G.:
Berücksichtigung von lokalem kurzwelligem Deckschichtbeulen in speziellen Finiten Sandwich-Schalenelementen;
ZAMM 71, T619-T623, 1991

Dorninger K., Rammerstorfer F.G.:
A Layered Composite Shell Element for Elastic and Thermoelastic Stress and Stability Analysis at Large Deformations;
Int.J.Num.Meth.Engng. 30, 833-858, 1990
Abstract

Rammerstorfer F.G., Scharf K., Fischer F.D.:
Storage Tanks under Earthquake Loading;
Appl.Mech.Rev. 43, 261-282, 1990
Abstract